• 전기학회논문지
• /
• 제58권3호
• /
• pp.455-461
• /
• 2009

This paper proposes Direct Load Control(DLC) operation scheme using a bidding system and the methodology to value proper quantity decided by the DLC program, which is a kind of resources for stabilization of electricity market price during peak times by managing consumer electricity demand. Since DLC program in Korea is based on the contract with the customers participating in this program, it is difficult to anticipate voluntary participation. That is, incentive for participants in DLC program is insufficient. To cope with this point, it is necessary to develop a new market mechanism and market compatible operation scheme for DLC programs. DLC market mechanism is deemed to be equipped with iterative bidding system, independent operation from energy market, and interactive with bidding information on energy market. With this market mechanism, it is important to find the optimal operation point of DLC allowing for the factors of stabilizing the electricity market price and compensating DLC implementation. This paper focuses on the mathematical approaches for the bid-based DLC operation scheme and examines several scenarios for the following technical justifications: 1) stabilization of electricity market price during peak times, 2) elasticity of demand.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• 농촌계획
• /
• 제27권2호
• /
• pp.23-34
• /
• 2021

This study aims to understand why the sales volume and the number of visitors are different in each rural tourism village. The study considered that the management and operation of rural tourism villages is one of the major influencing factors. To prove this, the study determined what factors were related to the management and operation of villages and derived detailed items to evaluate them. In the study, the researchers conducted an in-depth interview and a literature review on the management and operation of rural tourism villages in Yangpyeong-gun. They also performed a case study on the Sumi village, one of the successfully managed and operated villages in Yangpyeong-gun, to determine the detailed items. As a result, seven factors were identified. These factors comprise operation entity, governance, shared vision, leadership, efficient role-playing, marketing efforts, and equity in profit distribution. Based on these seven factors, 85 of the evaluation items were developed. The management and operation scores of 85 items were measured and summed for each of the 21 rural tourism villages. First, 21 villages were divided into two groups by the sales figures to derive items to determine the difference in the mean value of the evaluation scores. Second, an independent sample t-test was conducted for each village at YangPyeong-gun. Third, the study divided the 21 villages into four groups using 46 evaluation items. Finally, the study's researchers clarified some challenges to solve and appropriate management and operation plans considering each type of rural tourism village.

• 지능정보연구
• /
• 제24권2호
• /
• pp.243-264
• /
• 2018

현재 전세계 배터리 시장은 이차전지 개발에 박차를 가하고 있는 실정이지만, 실제로 소비되는 배터리 중 가격 대비 성능이 좋고 재충전을 통해 다시 재사용이 가능한 납축전지(이차전지)의 소비가 광범위하게 이루어지고 있다. 하지만 납축전지는 복합적 셀(cell)을 묶어 하나의 배터리를 구성하여 활용하는 배터리의 특성상 하나의 셀에서 열화가 발생하면 전체 배터리의 손상을 가져와 열화가 빨리 진행되는 문제가 존재한다. 이를 극복하기 위해 본 연구는 기계학습을 통한 배터리 상태 데이터를 학습하여 배터리 열화를 예측할 수 있는 모델을 개발하고자 한다. 이를 위해 실제 현장에서 배터리 상태를 지속적으로 모니터링 할 수 있는 센서를 골프장 카트에 부착하여 실시간으로 배터리 상태 데이터를 수집하고, 수집한 데이터를 이용하여 기계학습 기법을 적용한 분석을 통해 열화 전조 현상에 대한 예측 모델을 개발하였다. 총 16,883개의 샘플을 분석 데이터로 사용하였으며, 예측 모델을 만들기 위한 알고리즘으로 의사결정나무, 로지스틱, 베이지언, 배깅, 부스팅, RandomForest를 사용하였다. 실험 결과, 의사결정나무를 기본 알고리즘으로 사용한 배깅 모델이 89.3923%이 가장 높은 적중률을 보이는 것으로 나타났다. 본 연구는 날씨와 운전습관 등 배터리 열화에 영향을 줄 수 있는 추가적인 변수들을 고려하지 못했다는 한계점이 있으나, 이는 향후 연구에서 다루고자 한다. 본 연구에서 제안하는 배터리 열화 예측 모델은 배터리 열화의 전조현상을 사전에 예측함으로써 배터리 관리를 효율적으로 수행하고 이에 따른 비용을 획기적으로 줄일 수 있을 것으로 기대한다.

• 한국통신학회논문지
• /
• 제34권1B호
• /
• pp.67-73
• /
• 2009

본 논문에서는 이종의 무선 네트워크 환경에서 기존의 HMIPv6 기반 고속 수직적 핸드오버(Fast Vertical Handover HMIPv6, FV-HMIP) 메커니즘을 최적화하고 개선시키기 위해, IEEE 802.21 매체 무관 핸드오버 기능 (Media Independent Handover Function, MIHF)을 기반으로 하는 새로운 메커니즘을 제안하며 "MFV-HMIP"이라 부른다. 제안된 메커니즘에서는 이웃하는 이종 네트워크의 이동성 앵커 포인트(Mobility Anchor Point, MAP)들에 대한 도메인 프리픽스를 제공하기 위해서 새로운 L3 정보를 포함하는 확장된 매체 무관 정보 서비tm(Media Independent Information Service, MIIS)를 정의한다. 이를 통해 기존 FV-HMIP 메커니즘에서 필요하였던 이웃하는 이종 네트워크의 MAP 발견(MAP Discovery) 과정을 생략할 수 있다. 따라서, 제안된 MFV-FMIP 메커니즘은 핸드오버 준비 과정 중에 무선 구간에서의 시그널링 트래픽을 줄일 수 있고 Predictive Mode 동작 가능성을 높일 수 있기 때문에, 무선 자원 효율성, 핸드오버 지연, 패킷 손실 측면에서 기존 FV-HMIP 메커니즘에 비해 우수할 수 있다. 해석적 성능 평가 및 모의 실험을 통하여 제안된 MFV-HMIP 메커니즘의 우수성을 검증한다.

• 동서간호학연구지
• /
• 제4권1호
• /
• pp.7-20
• /
• 1999

Operation usually brings about psychological stress as well as physical stress to the patient and it greatly influences the maintenance of the homeostasis. Until now, most of the nursing research concerning the anxiety of the patient undergoing an operation has been done while the patient was under general anesthesia. Under local anesthesia, the anxiety of the patient who undergone operation is short. However, there is much demand of the operational nurses to mediate between the patient who is undergoing operation when fully conscious, as they are aware of the patient's anxiety and to decrease the patient's anxiety of this local anesthesia. Therefore, this research tries to verify the effects of the Hand-holding program on the anxiety of the operational patient undergoing local anesthesia and affirms the role of the nursing intervention. As an unequivalent control group non-synchronized designs, this research selects out 20 control groups and 21 experimental groups at random who have received cataract operation while under local anesthesia and after implementing the Hand-holding program to the experimental groups while undergoing the operation, the effect of the experiment was observed. By observing the Epinephrine, Cortisol, blood pressure, and pulse for the physical indexes before and after the enforcement of the hand-holding, and using the measurement of Speilberger(1972) for the psychological indicators for the anxiety of the patient before and after hand-holding, the results were analyzed through SAS program. As a results, intervention of hand-holding had a remarkable effect to decrease the anxiety felt by the patient and the diastolic blood pressure also was effectively decreased. On the other hand, through the decrease of the systolic blood pressure was also observed, it was not statistically significant. In the Epinephrine and Cortisol indicators, the intervention of hand-holding was revealed to have an insignificant effect. The Hand-holding was revealed to have an indicators, the intervention of Hand-holding was revealed to have an insignificant effect. The Hand-holding program may be said to have an effect which decreases the psychological anxiety of the patient undergoing local anesthesia.

• Journal of Chest Surgery
• /
• 제31권5호
• /
• pp.494-501
• /
• 1998

저자들은 1993년 5월부터 1995년 5월까지 인공심폐기를 사용한 개심술을 받은 211명을 대상으로 후향적 조사를 하였다. 우리는 술후 새로이 발생한 급성 신부전에 초점을 두었기에 술전 creatinine 수치가 1.5 mg/dL이하였던 환자를 다변수 통계를 이용하여 조사하였다. 술전 신기능이 정상이었던 환자는 198명(74%)이었는데 이중 27명(14%)이 술후 신장 합병증을 보였다. 20명(10%)은 신기능 이상상태(1.5$\leq$serum creatinine level < 2.5 mg/dL)였고, 7명(4%)은 급성 신부전(serum creatinine level$\geq$2.5mg/dL) 상태였다. 수술 사망률은 정상에서는 5.8%, 신기능 이상 환자에서는 5%, 급성 신부전 환자에서는 43%였다(p=0.036). 술후 급성 신부전은 심혈관 합병증, 호흡기 합병증과 함께 수술 사망의 독립적인 위험인자로 밝혀졌고, 다변수 분석에서 술후 급성 신부전 발생 위험인자는 고령, 응급수술, 저심박출증 등이었다. 술전 신부전을 보였던 13명에서 정상이었던 환자보다 술후 유병률과 사망률이 높았다. 결론적으로 술전 신기능 이상을 보이지 않았던 환자에서 술후 급성 신부전의 발생률은 낮았으나, 신부전과 동반된 사망률은 여전히 높았다. 그러므로 술전, 술중, 술후 신부전 발생에 영향을 주는 혈류역학 인자들의 세심한 관찰이 요구된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1568-1572
• /
• 2004

This paper proposes a new online calibration algorithm for the array antenna system. As you know, the several previous calibration methods for the mutual coupling did not estimate but measure mutual coupling effect at the real or test-bed system directly. Therefore we suggest some idea to compensate the calibration errors due to mutual coupling effect and mismatch in cables and electronic modules without the off-line calibration. In this work, we can calibrate the array antenna system under the operation of the system using Independent Component Analysis(ICA). This is what is called an online calibration. As you know, the ICA method has permutation and scaling problems. However, we solve problems of the ICA method and apply it to the calibration of an array antenna. The method simultaneously estimates the DOA(Direction of Arrival) of the signals, and calibrates the array for that specific angle. The proposed algorithm is evaluated by computer simulation and its behavior is illustrated by a numerical example.

• 한국실내디자인학회논문집
• /
• 제18권2호
• /
• pp.93-101
• /
• 2009

This study is including the independent project, "building children's library of the town" that is conducted by a local resident. The study object is the contents of the "design workshop for library planning" and the general process during one year since the opening. This study is delivering "information of children's library" through the work-shop and is conducting the role of a professional space planner by measuring the blueprint. Thus, the study could be conducted with synthetic viewpoint on each library. The followings are the results from the study. First, there were various space operations and a variety of programs in the case library that is independently managed. This is directing to "the constructive and active space usage" by the users and finally results in positive circulation. Secondly, there is a change through the process of execution and operation in the library construction plan. There are needs for the flexible space expansion and adjustment, modifiable furniture layout and design and various keeping areas because there is on-going tendency of corresponding space change. The third, the author could draw more practicable consideration points for space planning by looking at the trend of space change in Transactionist viewpoint. Thus, this study is very meaningful in terms of planning of sustainable public areas.

• 한국지열·수열에너지학회논문집
• /
• 제13권3호
• /
• pp.9-15
• /
• 2017

In this study, set values of PICV(Pressure Independent Control Valve) were simulated according to the pressure distribution and velocity. The higher the set value and the open rate, as the lower the pressure in the neck. On the contrary, the lower the set value and open rate, as the higher the pressure in the neck. When the set value was small, the pressure was distributed sufficiently and confirmed that the pressure was generated by the VOF, confirming that it could generate a vapor pressure. When the set value 100 %, the lower corn open rate of the differential pressure was 46 % to 29 %, set value 100 % was 29 % to 19 %, and set value 6 % was 12 % to 6 % for the lower corn open rate percentile, it was limited to within 50 %. Thus, the results of this study on the correlation between open rate and differential pressure of the set value of the PICV will be beneficial to improve performance of flow control valves and contribute to their efficient operation used for a hydronic system.