• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1065-1072
• /
• 2010

The excavation site in the new city of inchon songdo is distributed with soft reclaimed soil and marine deposit. So, the general ground anchor is not applied to this layer of soft ground as the earth retaining support system, because of settlement. And then, Jacket pack anchor which is newly developed in order to increasing the pullout resistance by certain grout bulb formation and expansion effect in soft ground is applied to this site instead of the general ground anchor. Though the maximum horizontal displacement shows about 30mm~100mm (The maximum horizontal displacement/excavation depth$\fallingdotseq$0.32~1.0%) according to excavation sequence, generally excavation work finished stably. Also, load cell after setting shows almost increasing trend with increasing horizontal displacement. It means that the settlement of Jacket pack anchor in soft ground is good. From the result of this case, we knew that Jacket pack anchor was able to use the earth retaining support system in soft ground. Using Jacket pack anchor in soft ground, The allowance of the horizontal displacement is applied more than general value considering soil factors.

• Fisheries and Aquatic Sciences
• /
• v.1 no.1
• /
• pp.19-23
• /
• 1998

Effects of pituitary and thyroid hormones on estradiol-induced vitellogenin (VTG) induction were electrophoretically examined in primary hepatocyte cultures of rainbow trout. Hepatocytes were precultured for 2 days and then estradiol-17 $\beta$ $(E_2,\;2 \times 10^{-6}M)$>, triiodothyronine $(T_3,\;10^{-8}-10^{-6}M)$, bovine growth hormone (bGH, 10-100 ng/ml), ovine prolactin (oPRL, 100-500 ng/ml), and pituitary extract (PE) of rainbow trout (0.75PE/dish) were added to the incubation medium. The hepatocytes were cultured for 7 more days. The addition of oPRL to the incubation medium was not effective in increasing VTG production at any concentrations. The addition of PE to the incubation medium with $E_2$ was not effective in increasing VTG production. The addition of bGH to the incubation medium with $E_2$ was not effective in increasing the rate of VTG production at concentrations of 10-50 ng/ml. However, a higher concentration of bGH, 100 ng/ml, increased VTG production. The various concentrations of $T_3$ were ineffective in stimulating VTG production. These results suggest that GH could be one of stimulus factors for VTG production in rainbow trout.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.628-635
• /
• 2008

A series of cone penetration tests in large calibration chamber were performed to investigate the effect of cementation level, relative density and vertical confining stress on cone resistance. From the experimental results, it was observed that the cone resistance is increased with increasing gypsum content, relative density, and confining stress. The increasing ratio on cone resistance of cemented sand compared with that of uncemented sand, that is IR($q_c$), was increased with increasing gypsum content and relative density, whereas it was decreased as the vertical confining stress increases. It was also observed that the cementation of granular soil influences the behavior of ground at low level of confining stress and its effect is diminished with depth.

• Korean journal of applied entomology
• /
• v.4
• /
• pp.1-6
• /
• 1965

In Korea the most important plant industry is the rice-growing but she has not yet attained self-sufficiency with regard to rice which is the basic food of Korean. In the past, various measures of increasing rice production have been tried with some success but the increasing rate of did not show the sufficient result. Judging from experiences, disease control may be the most important factor which has influence on increasing of rice production in Korea. During the past 60 years three periods divided by the transition of rice diseases were noted, and especially the recent transition attracted much attention . That is, sheath blight and stripe which were minor diseases in the past have promptly spread all over the country and caused heavy losses to rice plant, and also local outbreak of bacterial leaf blight and dwarf were noticed. Various environmental factors are related to such transition of rice disease. Above all, cultivated varieties susceptible to these diseases, increase of application of nitrogenous fertilizer, earlier transplanting and density of transplanting are considered to be lucre closely related to the development of these diseases and successive development of blast. On the other hand. application of forage fungicides such as organic mercury compounds specific to blast contributed to reduce prevalent area if blast in spite of wide spread of susceptible varieties and increase of application of nitrogenous fertilizer. These facts were confirmed by Korean investigators At the present which various diseases to control coexist in the same region, no one variety resistant to all of these diseases is provided and cultural practices for the control of these diseases often do not produce sufficient yield of rice. it is emphasized that a role of pesticides is very great.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.470-477
• /
• 2001

Constant ΔK fatigue crack growth tests were performed by applying an intermediate multiple overload for S45C steel. The purpose of the present study is to investigate effects of specimen thickness at various baseline stress intensity factor range levels (ΔK(sub)b), overload application position (a/W) and overload application frequency (OL(sub)HZ) on fatigue crack growth retardation behavior. The principal results are summarized as follows. The amount of retardation for a given ΔK(sub)b level is increased with increasing the baseline stress intensity factor range level for all specimen thickness. The normalized minimum crack growth rate is increased with increasing the specimen thickness, except for ΔK=45MPa√m. The retardation cycle is decreased with increasing a/W and increased with OL(sub)HZ.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.6
• /
• pp.693-701
• /
• 2006

The present work investigates the local heat transfer characteristics and the associated frictional loss in a rectangular channel with inclined solid and perforated baffles to obtain the basic design data for gas turbine. Five different geometries of baffles such as 1) solid (without hole), 2) three holes, 3) six holes, 4) nine holes, 5) twelve holes were covered. A combination of two baffles of same overall size is used. The flow Reynolds number is ranged from 28,900 to 70,100. The placement of baffles augments the overall heat transfer greatly by combining both jet impingement and the boundary layer separation. The present results show that the average Nusselt number distribution is strongly dependent on number of holes in the baffle plates, i.e., the average Nusselt number increases with increasing number of holes. The friction factor decreases also with increasing the number of holes. however. its value increases with increasing the Reynolds number.

• Journal of the Korean Home Economics Association
• /
• v.45 no.6
• /
• pp.89-100
• /
• 2007

The objective of this study was to analyze children's maladjustment behavior as related to sex, temperament, and the mother's maternal attitudes, and to characterize the relative influence of these variables on the maladjustment behavior of 3-5 year old children in early child education centers. The subjects were recruited from Gwangju City, and included 217 mothers, and the teachers of their children. Statistical analyses were conducted using SPSSWIN(12.0) for Cronbach's alpha, t-test, one-way ANOVA, Pearson's correlation, and multiple regression analysis. The major findings are as follows; 1. Statistically significant differences existed in the maternal overprotective attitude group with regard to anxiety and withdrawal behaviors. 2. Boys evidenced more aggression, inattention, impulse, and anxiety behaviors than did girls. 3. The activity and adaptation factors of temperaments were significantly different. Increasing activity was associated with increasing aggressive behavior. Increasing adaptation was associated with higher levels of distraction. 4. In terms of maladjustment behaviors in the aggregate, the sex of the children appeared to be the most salient influencing factor, and the activity factor of children's temperament also exerted a significant influence, explaining 13% of maladjustment behavior.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.55-60
• /
• 2000

Constant ${\Delta}K$ fatigue crack growth tests were performed applying an intermediate multiple overload for SM45C steel. The purpose of the present study is to investigate the effects of specimen thickness at various baseline stress intensity levels$({\Delta}K_b)$, overload application frequency(a/W) and overload application frequency$(OL_{HZ})$ on fatigue crack growth retardation behavior. The principal results are summarized as follows. The amount of retardation for a given ${\Delta}K_b$ level is increased with increasing the baseline stress intensity level in all specimen thickness. The normalized minimum crack growth rate is increased with increasing the specimen thickness, except for ${\Delta}K=45MPa \sqrt m$. The retardation cycle is decreased with increasing the overload application position and increased with the overload application frequency.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.55-65
• /
• 1999

Metallurgical factors influencing toughness of the Intercritically Reheated Coarse-Grained Heat Affected Zone (ICCG HAZ) of multiple welded SA508-cl.3 Reactor Pressure Vessel Steel were evaluated. The recrystallized austenite formed along the prior austenite grain boundaries and late interfaced on heating to the intercritical range was transformed to bainite and/or martensite during cooling. The newly formed martensite always included some retained austenite(M-A constituents). The characteristics(amount, hardness, density, and size) of M-A constituents were found to be strongly associated with both peak temperature and cooling time(△t8/5(2)) of last pass. Toughness in the ICCG HAZ was deteriorated with increasing amount of M-A constituents which was increased with increasing the last peak temperature within the intercritical temperature range. Meanwhile, for the same intercritical peak temperature, toughness was decreased with increasing cooling time. When cooling time was short, the dominant factor influencing toughness of the ICCG HAZ was amount of M-A constituents. However, when cooling time was lengthened, the hardness difference between M-A constituents and softened matrix(tempered martensite) was found to be the dominant factor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.395-399
• /
• 2002

The UK mobile market continues to grow as much as 73 percent of UK adults had a mobile telephone in August 2001. As a result of increasing competition, market shares of 4 operators, Vodafone, BTCellnet, One2One, Orange, in the UK mobile market become to be balanced. This paper examined driving factors for increasing competition and balancing market in the UK mobile market. In the Korean mobile market, leading operators' market share continues to be bigger than new entrants. Users have been decreased opportunity selecting operators by M&A. This paper discussed the policy options for the effective competition in the Korean mobile market based on the case of the UK mobile market.