• Title/Summary/Keyword: Increase rate

Search Result 15,339, Processing Time 0.035 seconds

Changes in the Distribution of Maternal Age and Parity and Increasing Trends in the Low Birth Weight Rate in Korea Between 1995 and 2005

  • Bae, Ji-Suk;Park, Jung-Han;Park, Yoo-Keun;Kim, Jong-Yeon;Lee, Sang-Won;Park, Soon-Woo
    • Journal of Preventive Medicine and Public Health
    • /
    • v.44 no.3
    • /
    • pp.111-117
    • /
    • 2011
  • Objectives: This study measured the impact of shifts in maternal age and parity on the increase in the low birth weight (LBW) rate in Korea. Methods: We obtained raw data for all 6 397 945 live births registered at the Korea National Statistical Office between 1995 and 2005. We calculated the proportion of increment in the LBW rate due to changes in the distribution of maternal age and parity (AP-dis) and the proportion due to changes in the age- and parity-specific LBW rate (AP-spe). Results: The LBW rate increased from 3.02% in 1995 to 4.28% in 2005. The multiple birth rate increased from 1.32% to 2.19% during the same period. Of the 1.26% points increment in the LBW rate, 0.64% points occurred among singleton births and 0.62% points occurred among multiple births. Changes in the AP-dis accounted for 50% of the increase in the LBW rate among singleton births, but did not contribute to the increase in the LBW rate among multiple births. The remainder of the total increment in the LBW rate was explained by the increase in the AP-spe. Conclusions: This study demonstrated that shifts in maternal age and parity among singleton births and increased multiple births were important contributors to the increment in the LBW rate. This study also revealed that the increase in the AP-spe was an equally important contributor as the shifts in maternal age and parity to the increment in the LBW rate among singleton births and was a major contributor among multiple births.

The Experiments for the Enhancement of Regression Rate of Hybrid Rocket Fuel

  • Shin Kyung-Hoon;Lee Changjin;Yu Yung H.
    • Journal of Mechanical Science and Technology
    • /
    • v.19 no.10
    • /
    • pp.1939-1949
    • /
    • 2005
  • Many studies have been conducted to increase regression rate of solid fuel in hybrid rocket. One of them resorts to swirl flow since it can extend the residence time of oxidizer in the fuel grain. Also, metal wires may lead to increase the regression rate of solid fuel as shown in solid propellants. In this study, a series of experiments was designed to investigate the enhancement of regression rate of solid fuel by embedded metal wires and by fuel port grain. And fuel port was designed with a helical configuration to attempt to induce swirl flow. PMMA with gaseous oxygen is the solid fuel used for investigation. Test results showed that embedded metal wires turned out to be ineffective method because only $3-4\%$ increases in regression rate were observed. However, fuel port grain configuration yields higher burning performance of up to $50\%$ increase in regression rate. Also pitch number as well as total impulse was found to be a design variable.

Analysis of Factors Affecting Regional Total Fertility Rate: Using a Model Considering Cross-sectional Dependence (지역 합계출산율에 영향을 미치는 요인 분석: 횡단면 의존성을 고려한 모형을 이용하여)

  • So-Youn Kim;Su-Yeol Ryu
    • Asia-Pacific Journal of Business
    • /
    • v.15 no.1
    • /
    • pp.335-352
    • /
    • 2024
  • Purpose - Low fertility rate is a serious problem, and this study analyzes factors affecting total fertility rate using panel data from 16 metropolitan cities and provinces in Korea from 2000 to 2022. Design/methodology/approach - Estimating the SAR model considering the weak cross-sectional dependence that exists in variables related to the regional total fertility rate, and using the DKSE estimation method considering the strong cross-sectional dependence. Findings - Estimation results considering weak and strong cross-sectional dependence were similar, confirming the robustness of the results. Female labor force participation rate has a positive effect on total fertility rate, and employment rate has no effect. However, the interaction term is a negative (-) sign. Crude marriage rate has a positive effect on total fertility rate, and apartment price has a slightly positive effect. Environmental factor has no effect, and policy factor has a negative effect. Research implications or Originality - In order for an increase in the female labor force participation rate to lead to an increase in the total fertility rate, qualitative improvements in female employment must be made. Financial investment policies for childbirth must increase their effectiveness. The problem of low fertility rate requires not only population policy but also social, economic, cultural, environmental, and policy conditions to be considered.

Dynamic response of coal and rocks under high strain rate

  • Zhou, Jingxuan;Zhu, Chuanjie;Ren, Jie;Lu, Ximiao;Ma, Cong;Li, Ziye
    • Geomechanics and Engineering
    • /
    • v.29 no.4
    • /
    • pp.451-461
    • /
    • 2022
  • The roadways surrounded by rock and coal will lose their stability or even collapse under rock burst. Rock burst mainly involves an evolution of dynamic loading which behaves quite differently from static or quasi-static loading. To compare the dynamic response of coal and rocks with different static strengths, three different rocks and bituminous coal were selected for testing at three different dynamic loadings. It's found that the dynamic compression strength of rocks and bituminous coal is much greater than the static compression strength. The dynamic compression strength and dynamic increase factor of the rocks both increase linearly with the increase of the strain rate, while those of the bituminous coal are irregular due to the characteristics of multi-fracture and heterogeneity. Moreover, the absorbed energy of the rocks and bituminous coal both increase linearly with an increase in the strain rate. And the ratio of absorbed energy to the total energy of bituminous coal is greater than that of rocks. With the increase of dynamic loading, the failure degree of the sample increases, with the increase of the static compressive strength, the damage degree also increases. The static compassion strength of the bituminous coal is lower than that of rocks, so the number of small-scale fragments was the largest after bituminous coal rupture.

Precedence Analysis of Traffic Safety Facilities Installation for Traffic Accidents (교통안전시설 설치의 교통사고 발생에 대한 선행성 분석)

  • Joo, Il-Yeob
    • Korean Security Journal
    • /
    • no.55
    • /
    • pp.31-55
    • /
    • 2018
  • The purpose of this study is to analyze the precedence analysis of traffic safety facilities installation for traffic accidents. The main results were as follows. First, the precedence of the number of traffic safety signs installation for the number of traffic accident is follows. The number of traffic safety signs[total number] (time precedent 1), the number of traffic safety signs[attention] (time precedent 7), the number of traffic safety signs[regulation] (time precedent 7), the number of traffic safety signs[indication] (time precedent 4) precede the number of traffic accidents as negative(-) relationship. Second, the number of traffic signal equipments[pedestrian lamp] (time precedent 2) precedes the number of traffic accidents as negative(-) relationship. Third, the precedence of the increase/decrease rate of traffic safety facilities installation for the increase/decrease rate of traffic accident is follows. The increase/decrease rate of traffic safety signs[total number] (time precedent 1), the increase/decrease rate of traffic safety signs[attention] (time precedent 1), the increase/decrease rate of traffic safety signs[indication] (time precedent 1), the increase/decrease rate of traffic safety signs[auxiliary] (time precedent 1) precede the increase/decrease rate of traffic accidents as negative(-) relationship. Fourth, the increase/decrease rate of traffic signal equipments[pedestrian lamp] (time precedent 0) accompanies the increase/decrease rate of traffic accidents as positive (+) relationship.

A Fundamental Properties of the Concrete Using Coarse Particle Cement and Mineral Admixture (굵은입자 시멘트와 광물질 혼화재를 조합 사용하는 콘크리트의 기초적 특성)

  • Han, Cheon-Goo;Jang, Duk-Bae
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.5 no.1
    • /
    • pp.131-138
    • /
    • 2010
  • This research intends to analyze the basic characteristics of cements(hereinafter "CC") with affordable price and particle distribution effective as hydration heat face which are discharged at the outlet of smashing process of ordinary portland cement(hereinafter "OPC") manufacturing process such as fluidity, rigidity, temporary insulation temperature increase amount etc to review the potential of developing "CC" to 3 ingredients low heat cement that substitutes fly ash and blast furnace slag(hereinafter "BS"). As a result of experiment, fluidity tended to decrease with increase in CC substitution rate, and increase with increase in FA+BS substitution rate. Air amount tended to slightly decrease with increase in CC substitution rate, and decrease with increase in FA+BS substitution rate. Condensation characteristics were such that condensation time was delayed with increase in CC and FA+BS substitution rate. As for the temperature rising amount by temporary insulation, peak temperature decreased with increase in CC substitution rate and increase in FA+BS substitution rate in general, and thereafter, temperature tended to decrease slowly. Compressive strength decreased with increase in CC and FA+BS substitution rate, and as aging goes on, long term strength was equivalent to plain or higher. By and large, when FA+BS was substituted to CC, fluidity and air amount tended to decrease, but hydration heat face showed good reduction effects, suggesting possibility of development to 3 ingredients low heat cement.

  • PDF

A Study on the Aspects of Chronic Circulatory Disease Through Treatment Analysis of Employee s Medical Insurance (직장의료보험 수진분석을 통한 만성 순환기계질환의 실태연구)

  • 이길숙;정연강
    • Journal of Korean Academy of Nursing
    • /
    • v.16 no.3
    • /
    • pp.38-66
    • /
    • 1986
  • Based on the statistical data of FKMIS during five years from 1981 to 1985, the major findings of studying on the treatments of employee's modical insurance covered people were made as follows. 1. During five years, the total number of trratment case was increased 25.14% annually, and so doubled. The consultation rate was increased from 2.086 to 2.856, showng annual increase of 8.17% and total increase of 36.91%. In the cafe, of in-patient, the rate was from 0.056 to 0.602, . showing annual increase of 2.58%. And in out-patient, the rate was from, 2.030 to 2.794, showing annual increase of 8.31%. The male: female ratio of treatment case was changed from 1 : 1.1 to 1 : 1.2. 2. Case of chronic disease was on the increase .every year. The ratio of medical expenditure of that disease to the total medical expenditure was increased from 22.99% in 1984 to 25.0% in 1985. 3. As a whole, the consultation rate of circulatory disease was increased from 26.10 in 1981 to 46.53 in 1985, showing an nual increase of 15.55 %. The rate of in-patient was increased from 2.06 to 2.94, showing annual increase of 9.30%. The rate of out-patient wag from. 24.04 to 43.59, showing annual increase of 16.04%. 4. The duration (days) of circulatory disease in 1985 by types is as follows. In the case of in-patient, rheumatic fever rheumatic heart disease, (22. 67), ischaemic disease (17.39), cerebrovascular disease (17.18), disease of pulmonary circulation and other from of heart disease (15.82), hypertensive disease (13.18), other disease of circulatory disease(11.55). In the case of out-patient, visiting day (11.57 day) and medical expenditure per case (7,853 won) is lower than that of other diseases (4.39 day, 4,361 won). 5. Cases of circulatory chronic disease were two times as many as those of non-chronic disease. Incidence of the out-patient was shown higher than that of in-patient. In the case of duration per case, the chronic disease(12.92 days) was longer that of non-chronic disease (9.8 day). 6. The male: female ratio of chronic rheumatic heart disease is 34.56 : 65.44 (in-patient) and 34. 67 : 65.33 (out-patient). The consultation rate(case per 1,000 persons) was increased from 1.11 in 1983 to 1.30 in 1985, showing annual increase of 8.22 %. The duration, visiting day, was decreased slightly, but medication day wasincreased from 13.93 in 1983 to 16.72 in 1985, showing annual increase of 9.56%. 7. The male: female ratio of hypertensive disease (case) was 39.36 : 60.64(in-patient) and 40.67 : 59.33 (out-patient). The consultation rate was increased from 19.59 in 1983 to 25.36 in 1985, showing annual increase of 13.78%. Duration, visting day was decreased slightly, but medication day was increased from 11.82 in 1983 to 12.77 in 1985, showing annual increase of 3.94%. 8. The male: female ratio of chronic pulmonary-ischaemic heart disease (case) was 48.90 : 51.10 (in-patient) and 43.66 : 56.34 (out-patient). The consultation rate of chronic pulmonary-ischaemic heart disease was increase from 0.69 in 1983 to 1. 12 in 1985, showing annual increase of 27.40%. Duration, visiting day, was decreased from 2.67 in 1983 to 2.36 in 1985, and medication day was decreased from 0.69 in 1983 to 1.12 in 1985, showing annual decrease of 2.09%. 9. The male: female ratio of cerebrovascular disease (case) was 47.90 : 52.10 (in-patient) and 52.28 : 47.72 (out: patient). The consulatation rate was increased from 2.12 in 1983 to 2.89 in 1985, showing annual increase of 16.76%, Duration, visiting day, was decreased slightly, but medication day was increased from 12. 67 in 1983 to 13.85 in 1985, showing annual increase of 4.55%. 10. In case of artery and capillary disease, the male: female ratio of case was 61.80 : 38.20 (in-patient) and 51.77 : 48.23 (out-patient). But durntion, visiting day, was increased from 3.45 in 1983 to 3.60 in 1985, showing annual increase of 2.15 % and the medication day was increased from 10. 06 to 10.18, showing annual increase of 0.59%.

  • PDF

Effect of Protein Concentration on Foam Separation in a Seawater Aquarium (해수활어수조의 포말분리시 단백질 농도의 영향)

  • SUH Kuen-Hack;SHIN Jeong-Sik;LEE Chang-Kuen;LEE Seok-Hee;CHEON Jae-Kee;JO Jae-Yoon
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.37 no.1
    • /
    • pp.18-23
    • /
    • 2004
  • Effect of initial protein concentration on the protein removal rate was assessed for seawater aquarium using a foam separator. Protein removal rate was increased and removal efficiency was decreased with the increase of initial protein concentration. Enrichment ratio was decreased and foam generation rate was increased with the increase of initial protein concentration. Total suspended solids (TSS) removal rate was increased with the increase of initial protein concentration, and TSS removal efficiency was decreased with the increase of initial protein concentration. Turbidity removal rate and removal efficiency were increased with the increase of initial protein concentration.

Fracture Detection of Milling Cutter Using Cutting Force and Acoustic Emission Signals (절삭력과 음향방출 신호를 이용한 밀링공구의 파손 검출)

  • Maeng, Min-Jae
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.3 no.1
    • /
    • pp.28-37
    • /
    • 2004
  • An on-line monitoring system of endmill failure such as weal, chipping, and fracture is developed using AE, cutting force Characteristic variations of AE and cutting force signals due to endmill failure are identified as follows. When endmill fracture occurs, AE count rate shows a rapid Increase in conjunction with a subsequent decrease while a standard deviation of the principal cutting force Increases significantly. The increase of AE count rate precedes the Increase of standard deviation of principal cutting force. Chipping results in relatively small increase and decrease of AE count rate without any significant variation of the cutting force Gradual increase of AE count rate and mean principal cutting force are Identified to be related with the wear of cutter. A cutter fracture detection algorithm is developed based on the present results. The signals me normalized to enhance the applicability of the algorithm to Wide those of fresh cutters, and qualitative characteristics of AE signals encountered at the moment of fracture are employed. It is demonstrated that the algorithm can detect the cutter fracture successfully.

  • PDF

Operating Characteristics of a Bubble Pump for Diffusion-Absorption Refrigerator (확산형 흡수식 냉동기용 기포펌프의 운전특성에 관한 연구)

  • 이현경;김선창;이재헌
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.13 no.9
    • /
    • pp.878-887
    • /
    • 2001
  • Experimental investigation has been carried out to examine the operating characteristics of a bubble pump for diffusion absorption refrigerator. The effects of heat input and delivery height on generation rate of refrigerant vapor and circulation rate of solution have been investigated. as a result heat input and delivery height increase, circulation rate of solution increases. And the smaller the tube diameter, the larger the circulation rate of solution. Pumping ratio increases to a critical point and then decrease with the increase of heat input, and it increases with the increase in delivery height. In this paper, Marcus's analytical theory was also examined. It was found that the Marcus\`s analytical theory of a bubble pump was not appropriate for a bubble pump using ammonia aqueous solution as a working fluid.

  • PDF