The Experiments for the Enhancement of Regression Rate of Hybrid Rocket Fuel

  • Shin Kyung-Hoon (Department of Aerospace engineering, Konkuk University) ;
  • Lee Changjin (Department of Aerospace engineering, Konkuk University) ;
  • Yu Yung H. (Department of Aerospace engineering, Konkuk University)
  • Published : 2005.10.01

Abstract

Many studies have been conducted to increase regression rate of solid fuel in hybrid rocket. One of them resorts to swirl flow since it can extend the residence time of oxidizer in the fuel grain. Also, metal wires may lead to increase the regression rate of solid fuel as shown in solid propellants. In this study, a series of experiments was designed to investigate the enhancement of regression rate of solid fuel by embedded metal wires and by fuel port grain. And fuel port was designed with a helical configuration to attempt to induce swirl flow. PMMA with gaseous oxygen is the solid fuel used for investigation. Test results showed that embedded metal wires turned out to be ineffective method because only $3-4\%$ increases in regression rate were observed. However, fuel port grain configuration yields higher burning performance of up to $50\%$ increase in regression rate. Also pitch number as well as total impulse was found to be a design variable.

Keywords

References

  1. Frederick, R. A., Moser, M. D., L. Knox, R. and Josh, J., 2004, 'Ballistic Properties of Mixed Hybrid Propellants,' AIAA paper 2004-3824, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  2. George, P., Krishnan, S., Varkey, P. M., Ravindran, M. and Ramachandran, L., 1998, 'Fuel Regression Rate Enhancement Studies In HTPB/GOX Hybrid Rocket Motors,' AIAA paper 9835064, 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  3. Humble, R. W., Henry, G. N. and Larson, W. J., 1995, Space Propulsion Analysis and Design, McGraw-Hill, Inc., Chap, 7
  4. Knuth, W. H., Chiaverini, M. J., Gramer, D. J. and Sauer, J. A., 1998, 'Experimental Investigation of A Vortex-Driven High-Regression Rate Hybrid Rocket Engine,' AIAA paper 98-3348, 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  5. Knuth, W. H., Chiaverini, M. J., Gramer, D. J. and Sauer, J. A., 1998, 'Development and Testing of a vortex-driven, High-regression Rate Hybrid Rocket Engine,' AIAA paper 98-3507, 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  6. Knuth, W. H., Chiaverini, M. J., Gramer, D. J. and Sauer, J. A., 1999, 'Solid-Fuel Regression Rate and Combustion Behavior of Vortex Hybrid Rocket Engines,' AIAA paper 99-2318, 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  7. King, M. K., 1989, 'Analytical Modeling of Effects of Wires on Solid Motor Ballistics,' AIAA paper 89-2784
  8. Kubota, N., Ichida, M. and Fujisawa, T., 1982, 'Combustion Processes of Propellants with Embedded Metal Wires,' AIAA Journal, Vol. 20. pp. 116-121 https://doi.org/10.2514/3.51056
  9. Risha, G. A., Boyer, E., Wehrman, R. B. and Kuo, K. K., 2002, 'Performance Comparison of HTPB-Based Solid Fuels Containing NanoSized Energetic Powder in a Cylindrical Hybrid Rocket Motor,' AIAA paper 2002-3576, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  10. Sutton, G. P. and Biblarz, O., 2001, Rocket Propulsion Elements, 7th ed., John Wiley & Sons, Chap. 15
  11. Tamura, S., and Yuasa, S. and Yamamoto, K., 1999, 'Effects of Swirling Oxidizer Flow on Regression Rate of Hybrid Rockets,' AIAA paper 99-2323, 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  12. Yuasa, S., Shimada, O., Imamura, T., Tamura, T. and Yamamoto, K., 1999, 'A Technique for Improving the Performance of Hybrid Rocket Engines,' AIAA paper 99-2322, 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit
  13. Yuasa, S., Yamamoto, K., Hachiya, H., Kitagawa, K. and Owada, Y, 2001, 'Development of a Small Sounding Hybrid Rocket with a Swirling-Oxidizer-Type Engine,' AIAA paper 01-3537, 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibits
  14. Zennin, A. A., Glaskova, A. P., Leipunskyi, O. I. and Bobolev, V. K., 1969, 'Effect of Metallic Additives on the Deflagration of Condensed System,' Twelfth Symposium (International) on Combustion, Combustion Institute, Pittsburgh, PA, pp. 27-35