• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.295-310
• /
• 2014

DCS (Distributed Control System), the main control system of power plants, is an automated system for enhancing operational efficiency by monitoring, tuning and real-time operation. DCS is becoming more intelligent and open systems as Information technology are evolving. In addition, there are a large amount of investment to enable proactive facility management, maintenance and risk management through the predictive diagnostics. However, new upcoming weaponized malware, such as Stuxnet designed for disrupting industrial control system(ICS), become new threat to the main control system of the power plant. Even though these systems are not connected with any other outside network. The main control systems used in the power plant usually have been used for more than 10 years. Also, this system requires the extremely high availability (rapid recovery and low failure frequency). Therefore, installing updates including security patches is not easy. Even more, in some cases, installing security updates can break the warranty by the vendor's policy. If DCS is exposed a potential vulnerability, serious concerns are to be expected. In this paper, we conduct the penetration test by using NESSUS, a general-purpose vulnerability scanner under the simulated environment configured with the Ovation version 1.5. From this result, we suggest a log analysis method to detect the security infringement and react the incident effectively.

• Korean Security Journal
• /
• no.36
• /
• pp.317-347
• /
• 2013

This study focuses on the characteristics of terrorist bombing incidents and causal factors on terrorist bombing incidents and number of casualty per incident in Afghanistan though statistical quantitative analysis. For doing so, the bombing data from GTD(Global Terrorism Database) of START program occurred from January 1st 2002 until December 31st 2011 was used. By using descriptive analysis, chi-square, and logistic regression analysis, characteristics of bombing incidents and causal factors on the frequency of incidents and the number of casualty were identified. According to the analysis results, a clear pattern was appeared in terrorist bombing incidents. This result suggests that terrorists rationally and strategically calculate bombing operations and therefore terrorist bombing incidents and number of casualty per incident are conditioned or affected by time, season, Pashtun tribal entity, production level of drugs, the characteristics of targets.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1999

Rectangular waveguide slot antenna which has simple structure, high efficiency, high trust and small size, is extending in a field of application such as many Radar and Microwave communication. A slot cut into a wall of waveguide is propagated electromagnetic wave to free space it interrtupts the flow of current inner conductor of waveguide. Therefore incident of slot, cutdepth, width, length, i.e. are important parameter of characteristic change of the slot antenna. Result from difficulty of theoretical analysis about slot frequently experimental measured data useful design and manufacture have been accomplished. In this paper, we find the suitable method of analysis that compare two analysis results with measured result of established literature - admittance of slot be solved by propagated power from electric field distribution of slot and mode current computation and accomplishment of computable chart which hasresonant length and cutdepth, incident of slot, i.e. and use the HFSS which applyed finite-element method obtain equal slot analyed method.

• Journal of Food Hygiene and Safety
• /
• v.28 no.2
• /
• pp.108-114
• /
• 2013

To describe the comparative awareness between media and industry, we conducted a survey with a professional group including 28 food safety managers at food corporations and 17 food journalists to find out the differences in perception of 'reporting terms' and 'correspondence terms' when food safety incident occurs. We surveyed by questionnaire methods and did the statistical analysis by SPSS. The results showed that 70.6% of the journalists and 92.9% of the corporation workers answered 'yes indeed' about the question whether the media has a great influence when food safety incident occurs. In the perception that use of the stimulating terms of the media was the cause of company damage, 83% of the corporate workers answered 'yes indeed', and 70.6% of the journalists answered 'yes'. It means that both groups agreed on stimulating terms causing company damage. In the question whether the 'reporting terms' of the media and the 'correspondence terms' of the government and academia made a difference in the consumers' perception and the spread of the incident, 92.9% of the corporate workers and 35.3% of the journalists answered 'yes indeed'. It means that both groups showed a common opinion that the difference in choice of words expanded the perception of consumers, and the spread of the incident. However, the corporate workers agreed with this in a more serious manner than the journalist group. In standardization of 'reporting terms' and restricting use, corporate workers were overall at a positive stand while journalists showed a big difference in opinion within the group. In conclusion, it is necessary to establish a measure to standardize the terms used by corporations, journalists, and professionals in order to decrease the differences of terms and the damage of consumers and the company when food safety incident occurs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.176-177
• /
• 2013

Surface plasmon polaritons (SPPs) have attracted the attention of scientists and engineers involved in a wide area of research, microscopy, diagnostics and sensing. SPPs are waves that propagate along the surface of a conductor, usually metals. These are essentially light waves that are trapped on the surface because of their interaction with the free electrons of conductor. In this interaction, the free electrons respond collectively by oscillating in resonance with the light wave. The resonant interaction between the surface charge oscillation and the electromagnetic field of the light constitutes the SPPs and gives rise to its unique properties. In this papers, we studied theoretical and experimental extraordinary transmittance (T) and reflectance (R) of 2 dimensional metal hole array (2D-MHA) on GaAs in consideration of the diffraction orders. The 2d-MHAs was fabricated using ultra-violet photolithography, electron-beam evaporation and standard lift-off process with pitches ranging from 1.8 to $3.2{\mu}m$ and diameter of half of pitch, and was deposited 5-nm thick layer of titanium (Ti) as an adhesion layer and 50-nm thick layer of gold (Au) on the semiinsulating GaAs substrate. We employed both the commercial software (CST Microwave Studio: Computer Simulation Technology GmbH, Darmstadt, Germany) based on a finite integration technique (FIT) and a rigorous coupled wave analysis (RCWA) to calculate transmittance and reflectance. The transmittance was measured at a normal incident, and the reflectance was measured at variable incident angle of range between $30^{\circ}{\sim}80^{\circ}$ with a Nicolet Fourier transmission infrared (FTIR) spectrometer with a KBr beam splitter and a MCT detector. For MHAs of pitch (P), the peaks ${\lambda}$ max in the normal incidence transmittance spectra can be indentified approximately from SP dispersion relation, that is frequency-dependent SP wave vector (ksp). Shown in Fig. 1 is the transmission of P=2.2 um sample at normal incidence. We attribute the observation to be a result of FTIR system may be able to collect the transmitted light with higher diffraction order than 0th order. This is confirmed by calculations: for the MHAs, diffraction efficiency in (0, 0) diffracted orders is lower than in the (${\pm}x$, ${\pm}y$) diffracted orders. To further investigate the result, we calculated the angular dependent transmission of P=2.2 um sample (Fig. 2). The incident angle varies from 30o to 70o with a 10o increment. We also found the splitting character on reflectance measurement. The splitting effect is considered a results of SPPs assisted diffraction process by oblique incidence.

• Progress in Medical Physics
• /
• v.27 no.3
• /
• pp.139-145
• /
• 2016

With the development in field of industry and medicine, new machines and techniques are being launched. Moreover, the complexity of the techniques is associated to an increasing risk of incident. Especially, a small error in radiotherapy can lead to a serious patient-related incident, risk management is necessary in radiotherapy in order to reduce the risk of incident. However, in field of radiotherapy, there are no legally binding clauses for risk management and there is an absence of risk management systems at an institutional level. Therefore, we analyzed institutional status of risk management, reporting & classification systems, and risk assessment & analysis in 31 countries. For risk management and reporting systems, 65% of countries investigated had legislation or regulations; however, only 35% of countries used classification systems. It was found that 43% more countries had legislation for risk management in healthcare than those for radiotherapy; 19% more countries had reporting systems for healthcare than those for radiotherapy. For classification systems, 60% more countries had legislation, recommendation, and guidelines in the field of radiotherapy than those for healthcare. Recently, international institutes have published several reports for risk management and patient safety in radiotherapy, owing to which, countries adopting risk management for radiotherapy will gradually increase. Before adopting risk management in Korea, we should precisely understand the procedures and functions of risk management, in order to increase efficiency of risk management because classification & reporting system and risk assessment & analysis are connected organically, and institutional management is needed for high quality of risk management in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.97-112
• /
• 2021

This study introduces lessons learned from investigation and analysis of major domestic and overseas cases of marine chemical incidents involving hazardous and noxious substances (HNS) during maritime transportation by chemical tankers carrying petrochemical products in bulk. The study then suggests plans to improve domestic marine HNS training curricula based on these lessons. Lessons learned from six incident cases are classified into the following six categories: 1) incident-related information, 2) safety, 3) pollution, 4) response, 5) salvage and 6) others. Based on these six categories, it is suggested that the curriculum provided by the Marine Environment Research & Training Institute for marine pollution prevention managers aboard noxious liquid substance carriers should be changed from the existing two-day training of eight subjects (16 h) to a three-day training of sixteen subjects (24 h). In addition, it is proposed that the marine chemical incident response course of the Korea Coast Guard Academy should be changed from the existing five-day training of fifteen subjects (35 h) to a six-day training of thirty-two subjects (48 h). These results are expected to contribute to sharing experiences and lessons learned about response to marine chemical incidents and to be used as basic data for improving the education and training courses for response personnel in preparedness for marine HNS incidents.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.1-6
• /
• 2007

In this study, we analyze the maximum power generation of photovoltaic(PV) module depending on constituent materials and incidence angle dependence of light. To verify characteristics of constituent materials, we made photovoltaic modules with 4 kinds of solar cells and textured glass according to fabrication method. To find the degree of the maximum power generation dependence on intensity of light, Solar Simulator is applied by changing angle of module and light intensity. Through this experiment, to obtain maximum power generation from limited PV modules, it is needed to fully understand constituent materials, fabrication method and dependence of incident light characteristics.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.1
• /
• pp.54-64
• /
• 1991

To accurately estimate the rate of sediment transport in shallow water bodies, it is necessary to investigate the irregular waves transformation characteristics and nearshore currents produced by random sea waves. Most of studies on numerical models for nearshore currents are based on the theory of monocromatic waves and thus, very few nearshore models take into account the effect of irregularities in the hight, period and directional spreading of incident waves. The numerical simulation model for nearshore currents used in this paper considers the effect of irregularities of incident waves, based on Individual Wave Analysis. The computational results are compared and shown in a reasionable agreement with the experimental data.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.7-16
• /
• 2013

As workplace incidents has been being declining in Korea, there is criticism of the effectiveness of occupational safety policy implementation. It is unknown that which policy target group needs to be targeted to yield effective injuries prevention. The purpose of this paper is to analyze and reveal the policy intervention group with a high priority in terms of industrial incident prevention and the related investment cost. A Policy Priority Model(PPM) is composed of 6 indicators regarding influences of both the incident reduction and the cost reduction. Z-score analyses are used to confirm the high policy priority area or policy target group. Overall, workplace with worker below 50 persons, construction site with the sales of more than a hundred million won, workplace with relatively small percentage of female employees and relatively higher percentage of older worker should be prioritized to reduce workplace injuries. This paper provides an analytic way that can be used to decide the policy priority workplace in order not only to reduce work-related injuries&illnesses and the related investment cost but to further lessen the related societal costs.