• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.75-78
• /
• 2004

Various jet engines (Turbine engine family and RAM Jet engine) have been developed for high speed aircrafts. but their application to hypersonic flight is restricted by principle problems such as increase of total pressure loss and thermal stress. Therefore, the development of next generation propulsion system for hypersonic aircraft is a very important subject in the aerospace engineering field, SCRAM Jet engine based on a key technology, Supersonic Combustion. is supposed as the best choice for the hypersonic flight. Since Supersonic Combustion requires both rapid ignition and stable flame holding within supersonic air stream, much attention have to be given on the mixing state between air stream and fuel flow. However. the wider diffusion of fuel is expected with less total pressure loss in the supersonic air stream. So. in this study the direction of fuel injection is inclined 30 degree to downstream and the total pressure of jet is controlled for lower penetration height than thickness of boundary layer. Under these flow configuration both streams, fuel and supersonic air stream, would not mix enough. To spread fuel wider into supersonic air an aerodynamic force, baroclinic torque, is adopted. Baroclinic torque is generated by a spatial misalignment between pressure gradient (shock wave plane) and density gradient (mixing layer). A wedge is installed in downstream of injector orifice to induce an oblique shock. The schlieren optical visualization from side transparent wall and the total pressure measurement at exit cross section of combustor estimate how mixing is enhanced by the incidence of shock wave into supersonic boundary layer composed by fuel and air. In this study non-combustionable helium gas is injected with total pressure 0.66㎫ instead of flammable fuel to clarify mixing process. Mach number 1.8. total pressure O.5㎫, total temperature 288K are set up for supersonic air stream.

• 대한방사선기술학회지:방사선기술과학
• /
• 제26권4호
• /
• pp.11-19
• /
• 2003

수도권에 소재하는 의료기관 44개 곳에서 시행하는 흉부X선 간접촬영에서 사용한 간접촬영 필름의 크기에 따라 촬영조건, 화상의 물리적 평가 및 시각적 평가, 조사선량 등을 조사한 결과 아직도 대부분 저관전압 촬영을 하고 있어 적절한 촬영조건 개선이 필요하며, 화상평가 비교에서 물리적 평가에서는 비슷한 결과를 보였으나 시각적 평가에서는 100mm 필름을 사용한 경우가 70mm 필름을 사용한 경우보다 대체적으로 우수한 것으로 나타났고, 흉부표면에 조사되는 선량은 70mm 필름을 사용한 경우가 100mm 필름을 사용한 경우보다 3배 이상의 피폭이 더 되고 있어 환자의 피폭선량 경감과 화질개선에 있어서 필름 선택의 중요성을 재삼 인식시켜 주었다.

• The Plant Pathology Journal
• /
• 제26권4호
• /
• pp.372-379
• /
• 2010

Macrophomina phaseolina causing charcoal rot was isolated from sesame seeds (cvs. Giza 32 and Shandawel-3) collected from different localities of Assiut, Sohage and El-Minia Governorates. The fungus was found in the highest frequently in samples collected from Assiut Governorate followed by Sohag and finally EL Minia Governorate. The obtained isolates were different in their virulence on the tested sesame cvs. Also, they differed in their growth nature including colony color and sclerotial production. The color of colonies of the pathogen seem to be correlated with density of sclerotial formation. Aqueous extracts of Majorna, Wild chamomile, Geranium oil and Nees plants were highly toxic to tested isolates of M. phaseolina, in vitro. On the other hand the rest of the tested aqueous extracts had no effect. Under greenhouse conditions in 2005 and 2006 seasons, soaking seeds of sesame before sowing in aqueous extracts of Eucalyptus, Nerium, Ocimum and Roesmary plants decreased the disease incidence. Aqueous extracts of Eucalyptus and Ocimum were the most effective treatment. Dipping sesame seeds in hot water at $60^{\circ}C$ for 5 minutes increased seed germination of Giza 32 and Shandawel-3 cvs. followed by $55^{\circ}C$, $50^{\circ}C$ and $45^{\circ}C$, while $40^{\circ}C$ treatment resulted the lowest seed germination rate. Dipping sesame seeds in hot water at different temperature before planting decreased seed, seedling and charcoal rots. Soaking seeds in hot water at $60^{\circ}C$ increased greatly plant height and decreased seed, seedling rot and charcoal rot followed by $55^{\circ}C$ and $50^{\circ}C$, under greenhouse condition.

• 한국토양비료학회지
• /
• 제22권1호
• /
• pp.67-71
• /
• 1989

소득작물(所得作物)의 연작년수(連作年數)가 수량(收量) 및 토양미생물상(土壤微生物相)에 미치는 영향(影響)을 검토(檢討)하기 위하여 '85年부터 '88년(年)까지 고추, 참깨, 땅콩에 대(對)하여 시험(試驗)을 수행(遂行)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 토양(土壤) pH는 연작년수(連作年數)가 증가(增加)함에 따라 0.1~0.9정도(程度)까지 낮아졌고 토양경도(土壤硬度)나 가비중(假比重)은 증가(增加)하였다. 2. 연작년수(連作年數)가 증가(增加)함에 따라 이병률(罹病率)은 증가(增加)하였으며 선충수 사년연작구(四年漣作區)에서 고추 880, 참깨 890, 땅콩 912 마리였다. 3. 세균(細菌)/사상균률(絲狀菌率)은 연작(連作)할수록 낮아져서 사년연작구(四年連作區)에서 고추 29.6, 참깨 30.7, 땅콩 12.0이었다. 4. 수량(收量)은 1년작(年作)에 비(比)하여 사년연작구(四年連作區)에서 고추 39%, 참깨 33%, 땅콩 23% 감소(減少)하였다.

• 한국응용곤충학회지
• /
• 제60권4호
• /
• pp.417-422
• /
• 2021

월동기 논과 논두렁에서 서식하고 있는 다양한 절지동물의 발생밀도를 조사하여 생물다양성에 대한 정보를 제공하고자 본 연구를 수행하였다. 동력흡충기를 이용하여 논과 논두렁에서 각각 5지점씩 50×50 cm 격자 내에 있는 지표면과 식물을 흡입하여 채집하였다. 논과 논두렁에서 채집한 총개체수는 41,197개체였으며, 대부분 Collembola, Hemiptera, Diptera가 많이 채집되었다. 영농형태별 유기농법 재배지와 관행농법 재배지에서의 절지동물 출현패턴은 거의 유사하였으나 채집된 개체수는 유기농법 재배지에서 더 많았다. 종다양성지수, 종풍부도지수, 종균일도 지수는 논보다는 논두렁에서 모두 높게 나타났고, 시기별로 큰 차이를 보였는데 이는 통계적으로 유의하였다(P < 0.05).

• 보건행정학회지
• /
• 제29권2호
• /
• pp.228-236
• /
• 2019

Background: This study investigates the impact of weekend admission with a patient safety indicator (PSI) on 30-day mortality among long-term insurance beneficiaries. Methods: Data were obtained from the National Health Insurance Service-Senior claim database from 2002 to 2013. To obtain unbiased estimates of odds ratio, we used a nested case-control study design. The cases were individuals who had a 30-day mortality event after their last medical utilization, while controls were selected by incidence density sampling based on age and sex. We examined the interaction between the main independent variables of weekend admission and PSI by categorizing cases into four groups: weekend admission/PSI, weekend admission/non-PSI, weekday admission/PSI, and weekday admission/non-PSI. Results: Of the 83,400 individuals in the database, there were 20,854 cases (25.0%) and 62,546 controls (75.0%). After adjusting for socioeconomic, health status, seasonality, and hospital-level factors, the odds ratios (ORs) of 30-day mortality for weekend admission/PSI (OR, 1.484; 95% confidence interval [CI], 1.371-1.606) and weekday admission/PSI (OR, 1.357; 95% CI, 1.298-1.419) were greater than for patients with weekday admission/non-PSI. Conclusion: This study indicated that there is an increased risk of mortality after weekend admission among patients with PSI as compared with patients admitted during the weekday without a PSI. Therefore, our findings suggest that recognizing these different patterns is important to identify at-risk diagnosis to minimize the excess mortality associated with weekend admission in those with PSI.

• Journal of Microbiology and Biotechnology
• /
• 제31권6호
• /
• pp.815-822
• /
• 2021

Indigenous fungus-feeding nematodes may adversely affect the growth and activity of introduced biocontrol fungi. Alginate pellets of the biocontrol fungus Trichoderma harzianum ThzID1-M3 and sclerotia of the fungal plant pathogen Sclerotinia sclerotiorum were added to nonsterile soil at a soil water potential of -50 or -1,000 kPa. The biomass of ThzID1-M3, nematode populations, and extent of colonization of sclerotia by ThzID1-M3 were monitored over time. The presence of ThzID1-M3 increased the nematode population under both moisture regimes (p < 0.05), and fungivores comprised 69-75% of the nematode population. By day 5, the biomass of ThzID1-M3b and its colonization of sclerotia increased and were strongly correlated (R² = 0.98), followed by a rapid reduction, under both regimes. At -50 kPa (the wetter of the two environments), fungal biomass and colonization by ThzID1-M3 were less, in the period from 5 to 20 days, while fungivores were more abundant. These results indicate that ThzID1-M3 stimulated the population growth of fungivorous nematodes, which in turn, reduced the biocontrol ability of the fungus to mycoparasitize sclerotia. However, colonization incidence reached 100% by day 5 and remained so for the experimental period under both regimes, although hyphal fragments disappeared by day 20. Our results suggest that indigenous fungivores are an important constraint for the biocontrol activity of introduced fungi, and sclerotia can provide spatial refuge for biocontrol fungi from the feeding activity of fungivorous nematodes.

• Clinics in Shoulder and Elbow
• /
• 제25권1호
• /
• pp.15-21
• /
• 2022

Background: This study was performed to identify the incidence of screw in-type lateral anchor pull-out in patients older than 60 years who underwent rotator cuff repair for large to massive rotator cuff tear (RCT). Methods: We reviewed 25 patients over 60 who were diagnosed with large to massive RCT and underwent arthroscopic rotator cuff repair in our hospital from March 2017 to February 2021. Preoperative tear size (anterior to posterior, medial to lateral) was measured via preoperative magnetic resonance imaging (MRI). All 25 patients underwent MRI scanning on postoperative day 1 and at 3 months after surgery. The change of anchor position was measured in axial views on MRI images postoperative day 1 and 3 months after surgery. And it was statistically compared according to bone mineral density (BMD), sex, and number of lateral anchors. Results: Two MRIs (postoperative day 1 and 3 months) in 25 patients were compared. Anchor pull-out occurred in six patients during 3 months (6.7%), and the mean pull-out length difference was 1.56 mm (range, 0.16-2.58 mm). There was no significant difference in the number of pull-out anchors, degree of pull-out difference by comparing BMD (A, BMD≤-2.5; B, BMD>-2.5), sex, or number of anchors used in each surgery (C, two anchors; D, three anchors) (p>0.05). Conclusions: Pull-out of screw in-type anchors was rarely observed and the mean pull-out length difference was negligibly small in our study. The screw in-type lateral anchor seems to be a decent option without concern of anchor pull-out even in elderly patients.

• Journal of the Korean Wood Science and Technology
• /
• 제51권6호
• /
• pp.493-508
• /
• 2023

Round timber materials of 600 mm length, cut from large-cross-section round timber of red pine (Pinus densiflora S. et Z.) of 450 mm width and 4.2 m length, were prepared as the target of kiln drying in this study. After treating the target materials through end sealing (ES), end sealing - kerfing (ES-K), lateral sealing - end sealing - boring (LS-ES-B), or lateral sealing - partial end sealing (LS-PES), the effects of the treatment on the incidence of drying defects were determined. The target materials with exposed lateral surface and sealed cross surface were steamed at the initial temperature of 65℃ above the official pest control temperature of 56℃, followed by kiln drying toward the final temperature of 75℃. The target materials with sealed lateral surfaces, on the other hand, were dried at the initial temperature of 90℃ at almost the maximum temperature of conventional kiln drying, as there is no risk of early check formation caused by surface moisture evaporation. The final temperature was set at approximately 100℃. The drying time, taken for the target materials with initial moisture content of 70%-80% to reach the target moisture content of 19%, varied across treatment conditions. The measured drying time was 1,146 hours (approximately 48 days) for the timber with sealed cross surface and 745 hours (approximately 31 days) for the timber with sealed lateral surface, until the moisture content reached the target level. The formation of surface checks could not be prevented in the control and ES groups, but a definite preventive effect was obtained for the LS-ES-B and LS-PES groups.

• 자원환경지질
• /
• 제48권2호
• /
• pp.115-130
• /
• 2015

확장 탄성 임피던스(extended elastic impedance, EEI)는 입사각에 따른 음향 임피던스(acoustic impedance, AI) 를 일반화한 탄성 임피던스(elastic impedance, EI)를 확장한 개념으로서 다양한 저류암 물성과 대비가 가능한 것으로 알려져 있다. 하지만 EEI 역산을 적용하여 예측한 저류암적 물성이 실제 물성을 얼마나 정확히 예측하는지를 검증한 사례는 거의 없다. 본 연구에서는 EEI 역산 기법을 이용하여 미국 와이오밍주 Teapot Dome 유전의 주요 저류층 중 하나인 Second Wall Creek 사암층의 P파속도($V_p$), S파속도($V_s$), P파속도-S파속도 비($V_p/V_s$), 포아송비(Poisson's ratio)와 같은 속도 물성들을 유추하고 실제 물리검층 자료와 비교하여 EEI 역산 기법의 정확도를 검증했다. 사용된 자료는 Teapot Dome 유전 남부의 3차원 공심점 모음 자료(CDP gather)와 많은 시추공에서 선택된 4개의 시추공 자료이다. $V_s$ 검층자료는 경험식을 통해 $V_p$ 검층자료로부터 계산되었다. 4개의 속도 물성 EEI 예측 %에러는 한 시추공에서의 포아송비를 제외하면 약 5%를 넘지 않는다. 그러나 속도로부터 직접적으로 계산되지 않는 공극률, 감마선 검층값, 밀도와 같은 물성들은 시추공에서의 EEI 역산 분석 결과가 만족스럽지 못하여 전체 자료에 EEI 역산을 적용할 수 없었다. 따라서 속도 물성의 경우 EEI 역산을 적용할 수 있지만 속도로부터 직접 계산이 되지 않는 물성의 경우는 EEI 역산 적용에 신중해야 할 것으로 판단된다.