• 태양에너지
• /
• 제11권3호
• /
• pp.74-83
• /
• 1991

본 논문은 substrate의 온도를 $200{\pm}1^{\circ}C$ 정도로 유지하며 진공저항 가열 증착법을 이용하여 (p)ZnTe/(n)Si 태양전지와 (n)CdS-(p)ZnTe/(n)Si 복접합 박막을 제작한 후 그 전기적 특성을 조사, 비교하였다. 제작한 (p)ZnTe/(n)Si 태양전지와(n)CdS-(p)ZnTe/(n)Si 복접합 박막에 대하여 $100[mW/cm^2]$의 광조사 하에서 특성을 조사한바 다음과 같은 결과를 얻었다. 단략전류$[mA/cm^2]$ (p)ZnTe/(n)Si:28 (n)CdS-(p)ZnTe/(n)Si:6.5 개방전압[mV] (p)ZnTe/(n)Si:450 (n)CdS-(p)ZnTe/(n)Si:250 충실도, FF (p)ZnTe/(n)Si:0.65 (n)CdS-(p)ZnTe/(n)Si:0.27 변환효율[%] (p)ZnTe/(n)Si:8.19 (n)CdS-(p)ZnTe/(n)Si:2.3 제작된 박막은 열처리에 의해 성능이 향상되지만 (p)ZnTe/(n)Si 태양전지는 약 $470^{\circ}C$ 이상의 온도와 15분 이상의 열처리 시간에서 그리고 (n)CdS-(p)ZnTe/(n)Si 복접합 박막은 약 $580^{\circ}C$ 이상의 온도와 15분 이상의 열처리 시간에서는 박막의 각종 구조결함으로 인한 감소현상을 나타내었다. 열처리 온도의 증가에 따라 박막의 표면저항은 감소하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제1권3호
• /
• pp.18-22
• /
• 2000

In this work, we reported the sulfur compositional variation of ZnS$\_$x/Se$\_$1-x/ epitaxial layers with growth temperature and BEP ration of ZnX/Se/)P$\_$ZnS//P$\_$Se/) grown on GaAs substrates by molecular beam epitaxy. The sulfur composition of ZnSSe epitaxial layers was varied sensitively on the growth temperature and show different linear relationship with growth temperature and BEP ration of ZnS/Se(P$\_$ZnS//P$\_$Se/), which revealed -0.107 %$\^{C}$ at (P$\_$ZnS//P$\_$Se/)=0.30 and -0.052 %$\^{C}$ at (P$\_$ZnS//P$\_$Se/)=0.158 rspectively. A reference data for the accurate control of the sulfur composition and the growth of high quality ZnSSe/GaAs epitaxial layers was provided.

• 한국전기전자재료학회논문지
• /
• 제31권7호
• /
• pp.443-449
• /
• 2018

We investigated the temperature-dependent photoluminescence spectroscopy of colloidal InZnP/ZnSe/ZnS (core/shell/shell) quantum dots with varying ZnSe and ZnS shell thickness in the 278~363 K temperature range. Temperature-dependent photoluminescence of the InZnP-based quantum dot samples reveal red-shifting of the photoluminescence peaks, thermal quenching of photoluminescence, and broadening of bandwidth with increasing temperature. The degree of band-gap shifting and line broadening as a function of temperature is affected little by shell composition and thickness. However, the thermal quenching of the photoluminescence is strongly dependent on the shell components. The irreversible photoluminescence quenching behavior is dominant for thin-shell-deposited InZnP quantum dots, whereas thick-shelled InZnP quantum dots exhibit superior thermal stability of the photoluminescence intensity.

• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.454-460
• /
• 2021

In this work, we synthesized alloy-core InZnP quantum dots, which are more efficient than single-core InP quantum dots, using a solution process method. The effect of synthesis conditions of alloy core on optical properties was investigated. We also investigated the conditions that make up the gradient shell to minimize defects caused by lattice mismatch between the InZnP core and ZnS is 7.7%. The stable synthesis temperature of the InZnP alloy core was 200℃. Quantum dots consisting of three layered ZnSe gradient shell and single layered ZnS exhibited the best optical property. The properties of quantum dots synthesized in 100 ml and in 2,000 ml flasks were almost equal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.531-531
• /
• 2012

So many groups have been researching the green quantum dots such as InP, InP/ZnS for overcoming the semiconductor nanoparticles composed with heavy metals like as Cd and Pb so on. In spite of much effort to keep up CdSe quantum dots, it does not reach the good properties compared with CdSe/ZnS quantum dots. This quantum dot has improved its properties through the generation of core/shell CdSe/ZnS structure or core/multi-shell structures like as CdSe/CdS/ZnS and CdSe/CdS/ CdZnS/ZnS. In this research, we try to synthesize the InP multi-shell structure by the successiveion layer absorption reaction (SILAR) in the one pot. The synthesized multi-shell structure has improved quantum yield and photo-stability. To generate white light, highly luminescent InP multi-shell quantum dots were mixed with yellow phosphor and integrated on the blue LED chip. This InP multi-shell improved red region of the LEDs and generated high CRI.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.451-451
• /
• 2012

Instead of a highly toxic CdSe and ZnScore-shell,InP/ZnSecore-shell quantum dots [1,2] were investigated as an active material for quantum dot light emitting diode (QD-LED). In this paper, aquantum dot light-emitting diode (QDLED), consisting of a InP/ZnS core-shell type materials, with the device structure of glass/indium-tin-oxide (ITO)/PEDOT:PSS/Poly-TPD/InP-ZnS core-shell quantum dot/Cesium carbonate(CsCO3)/Al was fabricated through a simple spin coating technique. The resulting InP/ZnS core-shell QDs, emitting near blue green wavelength, were more efficient than the above CdSe QDs, and their luminescent properties were comparable to those of CdSe QDs.Thebrightness ofInP/ZnS QDLED was maximumof 179cd/m2.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.170-174
• /
• 2008

리튬염을 포함하는 P(VDF-HFP)계 겔 고분자에 surfactant-assisted templating process로 합성한 메조포러스 ZnS를 충전하여 다양한 ZnS 무게비를 가지는 전해질 필름을 제조하였고 겔 필름의 이온 전도도를 온도에 따라 측정하였다. 그 결과, 대체적으로 ZnS의 함량비가 증가할수록 증가하였다. 특히 20 wt%와 25 wt% ZnS를 포함하는 겔 필름은 상온에서 $10^{-4}Scm^{-1}$의 높은 이온 전도도를 보였다. 하지만 20 wt% 이상의 함량비에서는 더 이상 이온 전도도가 증가하지 않았다. 합성된 메조포러스 ZnS와 겔 전해질 필름의 특성은 XRD(x-ray diffractometer), DSC(differential scanning calorimetry), TGA(thermogravimetric analysis), FT-IR(fourier transform-infrared spectrometer), SEM(scanning electron microscopy), TEM(transmission electron microscopy)을 이용하여 분석하였다. 이온 전도도는 교류 임피던스법에 따라서 승온하면서 측정하였다.

• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.11-16
• /
• 2017

In this study, simple chemical synthesis of green emitting Cd-free InP/ZnS QDs is accomplished by reacting In, P, Zn, and S precursors by one-pot process. The particle size and the optical properties were tailored, by controlling various experimental conditions, including [In]/[MA] (MA: myristic acid) mole ratio, reaction temperature and reaction time. The results of ultraviolet-visible spectroscopy (UV-vis), and of photoluminescence (PL), reveal that the exciton emission of InP was improved by surface coating, with a layer of ZnS. We report the correlation between each experimental condition and the luminescent properties of InP/ZnS core/shell QDs. Transmission electron microscopy (TEM), and X-ray powder diffraction (XRD) techniques were used to characterize the as-synthesized QDs. In contrast to core nanoparticles, InP/ZnS core/shell treated with surface coating shows a clear ultraviolet peak. Besides this work, we need to study what clearly determines the shell kinetic growth mechanism of InP/ZnS core shell QDs.

• Journal of Information Display
• /
• 제13권2호
• /
• pp.91-95
• /
• 2012

Indium phosphide (InP) quantum dots (QDs) are considered alternatives to Cd-containing QDs for application in light-emitting devices. The multishell coating with ZnSe/ZnS was shown to improve the photoluminescence quantum yield (QY) of InP QDs more strongly than the conventional ZnS shell coating. Structural proof for this system was provided by X-ray diffraction and transmission electron microscopy. QY values in the range of 50-70% along with peak widths of 45-50 nm can be routinely achieved, making the optical performance of InP/ZnSe/ZnS QDs comparable to that of Cd-based QDs. The fabrication of a working electroluminescent light-emitting device employing the reported material demonstrated the feasibility of the desired application.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.151-155
• /
• 2014

We have developed quantum dot light emitting diodes (QD-LEDs) using a InP/ZnSe/ZnS multi-shell QD emission layer. The hybrid structure of organic hole transport layer/QD/organic electron transport layer was used for fabricating QD-LEDs. Poly(4-butylphenyl-diphenyl-amine) (poly-TPD) and tris[2,4,6-trimethyl-3-(pyridin-3-yl)phenyl]borane (3TPYMB) molecules were used as hole-transporting and electron-transporting layers, respectively. The emission, current efficiency, and driving characteristics of QD-LEDs with 50, 65 nm thick 3TPYMB layers were investigated. The QD-LED with a 50 nm thick 3TPYMB layer exhibited a maximum current efficiency of 1.3 cd/A.