• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.431-435
• /
• 2009

The apparatus has been fabricated using the laser diode and microprocessor unit. The apparatus used a InGaAlP laser diode for laser medical therapy and was designed for a pulse width modulation type to increase stimulation effects. To raise the stimulus effect of the human body, the optical irradiation frequency could be set up. The study has executed in-vivo experiment by employing our own developed laser diode irradiation system to investigate the effects of the InGaAlP laser diode irradiation on the wound healing as a preliminary study aimed at the application of InGaAlP laser diode to wound healing of human skin injury. The study cut out whole skin layers of Sprague-Dawley rat on the back part in 1 cm circle and observed developing effects after executing light irradiation for 9 days, and in result it is found that the light irradiation rat showed earlier wound healing than non-irradiation rat during the experimental period. In addition, there are some differences found regarding the healing process between laser diode irradiated rats and non-irradiated ones.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.131-138
• /
• 2011

We fabricated distributed feedback InGaAsP/InP laser diodes for optical fiber communication module and characterized the lasing properties in continuous wave operation. The active layer of 7-period InGaAsP(1.127 eV)/InGaAsP(0.954 eV) multi-quantum well structure was grown by the metal-organic chemical vapor deposition. The grating for waveguide was also fabricated by the implementation of the Mach-Zehender holographic method of two laser beams interference of He- Cd laser and the fabricated laser diode has the dimension of the laser length of $400{\mu}m$ and the ridge width of $1.2{\mu}m$. The laser diode shows the threshold current of 3.59 mA, the threshold voltage of 1.059 V. For the room-temperature operation with the current of 13.54 mA and the voltage of 1.12 V, the peak wavelength is about 1309.70 nm and optical power is 13.254 mW.

• 한국광학회지
• /
• 제7권3호
• /
• pp.266-271
• /
• 1996

본 연구에서는 수직형 LPE방법으로 제작된 InGaAsP/ImP RWG(Ridge Waveguide) MQW(Mutiple Quantum Well)-LD(Laser diode)의 광학적 특성을 조사하여 제작된 LD의 특성과 설계결과를 비교 분석하였다. 광학적 특성 분석결과 제작된 LD가 설계된 데로 측방향 단일모드로 동작하였으며 내부양자효율은 77%, 내부손실은 18$cm^{-1}$ /, 발진파장의 온도특성은 5.5.angs./C.deg.로 나타났다. 이러한 결과들로부터 수직형 LPE방법으로 성장된 에피층의 특성과 MQW의 계면특성이 아주 양호하다는 것을 알 수 있었으며 제작된 RWG MQW-LD의 특성도 양호함을 알 수 있었다.

• ETRI Journal
• /
• 제32권2호
• /
• pp.339-341
• /
• 2010

The fundamental transverse mode lasing of a hybrid laser diode is a prerequisite for efficient coupling to a single-mode silicon waveguide, which is necessary for a wavelength-division multiplexing silicon interconnection. We investigate the lasing mode profile for a hybrid laser diode consisting of silicon slab and InP/InGaAsP deep ridge waveguides. When the thickness of the top silicon is 220 nm, the fundamental transverse mode is lasing in spite of the wide waveguide width of $3.7{\mu}m$. The threshold current is 40 mA, and the maximum output power is 5 mW under CW current operation. In the case of a thick top silicon layer (1 ${\mu}m$), the higher modes are lasing. There is no significant difference in the thermal resistance of the two devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.240-240
• /
• 2009

We developed the low level laser therapy(LLLT) apparatus for external injury cure using a GaAsP Diode. This equipment was fabricated by using GaAsP diode and a microcontroller, and designed to enable us to control light irradiation timer, and frequency. In this paper, the designed device was used to find out how GaAsP diode light source affects the skin wound of RAT. In the experiment, $1cm^2$ wounds on the External injury of RAT were made. Light irradiation RAT and none light irradiation RAT divided, each RAT was irradiated 20 min a day for 9 days. In result, compared with none light irradiation RAT, the lower incidence of inflammation and faster recovery was shown in light irradiation RAT.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.764-769
• /
• 2004

In order to reduce operating voltage of the GaN based blue-violet laser diodes, the effect of highly Mg doped GaN layer, which was grown below ohmic contact metals, on contact resistivity as well as operating voltage has been investigated. The addition of the highly Mg doped GaN layer greatly reduced contact resistivity of Pd/Pt/Au ohmic contacts from $5.2 \times {10}^-2 \Omegaㆍ$\textrm{cm}^2$ to 7.5 \times {10}^-4 \Omegaㆍ$\textrm{cm}^2$$. In addition, it also decreased device voltage at 20 mA by more than 3 V. Temperature- dependent sheet resistivity of the highly Mg doped GaN layer suggested that the reduction of the contact resistivity could be attributed to predominant current flow at the interface between the Pd/Pt/Au contacts and p-GaN through a deep level defect band, rather than the valence band.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.445-450
• /
• 2019

The influence of high-power laser diode (HPLD) emitter width on the device performance is investigated for 975-nm (In,Ga)(As,P)/(Al,Ga)As broad-area HPLDs, using self-consistent electro-thermal-optical simulation. To guarantee the simulation's accuracy, simulated results are matched with the measured results for a sample HPLD with fitting parameters. The influences of HPLD emitter width on temperature distribution, output power, and the beam product parameter (BPP) are analyzed for three different emitter widths of 50, 70, and $90{\mu}m$. It is found that a device with smaller emitter width exhibits both thermal rollover and thermal blooming at lower output power, but smaller BPP.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.67-67
• /
• 1997

• 한국광학회지
• /
• 제14권6호
• /
• pp.669-673
• /
• 2003

본 연구에서는 기존의 ridge waveguide laser diode(RWG LD)보다 ridge폭에 따른 측방향 단일모드 특성이 우수하고 planar 화에 유리하며 측방향의 유효 굴절률차를 ridge 구조에 추가로 성장된 InGaAsP층의 두께로 조절이 가능한 Buried RWG LD를제작하였다. 본 연구에서는 Buried RWG LD를 CBE장치로 InGaAs/InGaAsP multiple quantum well(MQW) 에피 웨이퍼를 성장하고, LPE로 재성장하여 B-RWG LD를 제작하였다. 또한 ridge 폭을 5 $\mu\textrm{m}$와 7 $\mu\textrm{m}$로 하여 B-RWG LD를 제작하고 특성을 비교하여 보았다. 제작된 7 $\mu\textrm{m}$ B-RWG LD에서 광출력이 20㎽에 이를 때까지 고차모드 발진에 의한 kink현상이 일어나지 않았으며, 포화 광출력이 80 ㎽ 이상임을 확인하였다. 제작된 B-RWG LD가 측방향 단일모드로 동작함을 확인하기 위해 FFP을 측정한 결과, ridge 폭이 5 $\mu\textrm{m}$일 때는 2.7I$_{th}$ , ridge 폭이 7 $\mu\textrm{m}$일 때는 2.4I$_{th}$ 까지 단일모드로 동작함을 확인할 수 있다.

• 한국광학회지
• /
• 제5권1호
• /
• pp.100-105
• /
• 1994

Littrow형 회절격자를 이용한 확장공진기를 657 nm 영역에서 연속동작하는 상용 InGaAsP 단일모우드 가시광 반도체를 이용하여 구성하였다. 제작한 확장공진기 시스템에서 657 nm InGaAsP 가시광 반도체 레이저의 선폭은 60 MHz에서 10 MHz 이하로 축소되었다. Littrow 회절격자의 설치각도와 레이저의 온도 및 주입 전류에 대한 반도체레이저의 주파수(파장) 의존성을 레이저 파장계를 이용하여 측정하였다. 상용 CQL820D 가시광 반도체레이저의 회절격자의 설치각도, 레이저 온도 및 주입전류에 대한 비례계수는 각각 1THz/mrad, 32.4 GHz/K, 그리고 6.14 GHz/mA 이었다.