• Applied Microscopy
• /
• v.52
• /
• pp.4.1-4.11
• /
• 2022

Field emission scanning electron microscopy (FESEM) is an essential tool for observing surface details of specimens in a high vacuum. A series of specimen procedures precludes the observations of living organisms, resulting in artifacts. To overcome these problems, Takahiko Hariyama and his colleagues proposed the concept of the "nanosuit" later referred to as "NanoSuit", describing a thin polymer layer placed on organisms to protect them in a high vacuum in 2013. The NanoSuit is formed rapidly by (i) electron beam irradiation, (ii) plasma irradiation, (iii) Tween 20 solution immersion, and (iv) surface shield enhancer (SSE) solution immersion. Without chemical fixation and metal coating, the NanoSuit-formed specimens allowed structural preservation and accurate element detection of insulating, wet specimens at high spatial resolution. NanoSuit-formed larvae were able to resume normal growth following FESEM observation. The method has been employed to observe unfixed and uncoated bacteria, multicellular organisms, and paraffin sections. These results suggest that the NanoSuit can be applied to prolong life in vacuo and overcome the limit of dead imaging of electron microscopy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.109-116
• /
• 2019

Survivability of soldiers has been greatly threatened by the development of thermal observation device(TOD). Therefore, infrared, especially thermal, stealth technology is applied to combat suit to avoid detection from TOD. In this study, prior to the thermal camouflage performance evaluation of combat suit, thermal signature characteristic from clothed the human body was analyzed considering the realistic condition for human surface temperature compared to that from unclothed human body. To get the realistic surface temperature distribution of human, thermoregulation and multi-layer skin structure model is applied to the human model. Based on temperature distribution, surface diffuse radiance in thermal range is calculated and by assuming the background conditions, contrast radiance intensity(CRI) characteristic of human body is analyzed. By wearing clothing, the CRI between background and human body became reduced in low emissive background but in high emissive background, the contrast is much more prominent. Therefore, this issue should be considered in design process of thermal camouflage combat suit.

• Journal of the Korean Society of Costume
• /
• v.20
• /
• pp.191-201
• /
• 1993

As a part of study examining Korean costume remaining in Yanbian China, this study explored changes in ceremonial clothing for marriage worn by Korean(Chosun race) in Yanbian China. About one hundred years ago, Koreans moved to Yanbian China and had worn traditional clothing for marriage ceremony until before 1940. Data were collected by true interview and field observation while staying in that area. Samo and Dalyung for bridegrooms, Wonsam and Jockdoory for bridegrooms, wonsam and Jockdoory for brides were usual costume for wedding ceremony, however, for couples in inferior conditions of life, Bazy and Jeogory for bridegrooms, yellow Jeogory and red Chima for brides were accepted for ceremonial costume. As western culture came to this area in about 1940, bridegrooms wore western style suit, while brides dress in white Chima, Jeogory and Neowool. To date, Korean brides have worn traditional Chima and Jeogory for marriage ceremony though slight change has occurred in clothing material and in the forms of Chima, Geogory and Neowool. As the pratice reflected the fact that Korean in Yanbian China as established and sustained traditional China as established and sustained traditional costume and Korean identity even in hush socio-cultural environment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.31-42
• /
• 1994

The purpose of this study was to investigate the effect of feeling distance of clothes in the person perception. The specific objectives were: 1) to investigate whether the compositions of clothes affect the rate of detouring, ; 2 ) to investigate whether the gender compositions of dyads affect the rate of detouring, ; 3) to investigate whether the distance between members of dyads affect the rate of detouring. ; 3) to investigate whether the distance between members of dyads affect the rate of detouring. ; 4) to investigate the .effect of the interaction among the compsitions of clothes, the gender compositions, and the distance between members of dyads in the person perception. For this study, two male and two female undergraduates were selected and wore business suit or casual wear as given by the researcher. The distance between members of dyads ranged from 100cm to 170cm with an increment unit of loom. The data from our observation were analysed by x2-test, ANOVA, and MCA. The major findings were ; 1) In male/male dyad, distance perception from clothes were affected by the compositions of clothes at all distance. In maleffemale dyad, when the distance between members of dyad is short, distance perception from clothes were affected by the compositions of clothes modes, 2) When two members of dyad wear business suit, distance perception from clothes were affected by the gender composions of dyads. 3) Distance perception from clothes were affected by distance factors at all the gender compositions of dyads. 4) In the person perception, the most imprtant clue was the distance between members of dyads. The pllysical distance, which was formed by clothes, was between 130cm and 140cm.

• The Research Journal of the Costume Culture
• /
• v.30 no.3
• /
• pp.366-380
• /
• 2022

This study aims to develop the designs and patterns of yoga tops that are better adjusted to suit females in their 30s and 40s. After conducting a comparative analysis of three different popular yoga garments, one yoga top currently on the market was selected. Subsequently, a fit evaluation was conducted on Trail 1-garment α, which was developed body analysis performed based on selected yoga top C, followed by the production of the Trial 2 garment after making adjustments according to the comparative observation results. Based on these results, garment C with the longest top length was evaluated as the best. The results of the evaluation of appearance and fit conducted of Trial 1-garment α compared to those of C showed that Trial 1-garment α was superior in both evaluations. Trial 2-garment β was produced after making improvements on Trial 1-garment α and then placed under identical comparative evaluation condition as Trial 1-garment α. Results showed a significant improvement compared to Trial 1-garment α, and the Trial 2 garment with an additional arm pattern was shown to be superior in shoulder strap width stability, shoulder strap pressure, chest stability, degree of waist pressure, waist comfort, general fitting, and supportiveness.

• Journal of the Korean Society of Costume
• /
• v.58 no.2
• /
• pp.78-92
• /
• 2008

The mutual relationship between fashion and architecture and the similarities in their form and structure have been continuously debated over the decades, considering that both spheres are objects used in human life. Both spheres bring about the creation of three-dimensional space structures that are completed by the human body and material, based on a design targeted for people. The similarities between fashion and architecture in terms of form and structure have been debated by western architecture scholars focusing on the support that holds the garment's shape, the tailoring of a men's suit and also the material. The debate originates from the discussion of F. Th. Vischer, Kritische Gnge, and Gottfried Semper during the nineteenth century on the similarities between crinoline and the form of architecture and also the similarities between sewing and architecture. However, architects always regarded fashion as the inferior creative process that follows architecture in viewing the relationship between fashion and architecture. During the mid to end of the twentieth century, contrary to previous decades, the sense of fashion in architecture stood out, as an issue and a different approach was taken in discussing architecture that incorporates fashion. Accordingly, in the mid 1990's, architecture scholars such as Deborah Fausch and Mark Wigley began to conduct close observation of the mutual relationship between fashion and architecture from a more equal point of view. Notwithstanding, their point of view was still biased towards architectural standards. Commencing the Millennium, fashion has become the primary work of creation which leads style in all spheres, and under these circumstances this point of view has transferred from architecture to fashion when thinking about relationships between these spheres. The discussion on fashion and architecture form fashion's point of view is currently concentrated on the post 1990's phenomenon and illustrates the environment that is related to architecture. In general, the discussion is limited to determining a work of an individual designer as 'being architectural' when explaining the sculptural form of fashion. Therefore, this research aims to renew the discussion on twentieth century fashion design, which was neglected in any studies on observing architecture and fashion. The aim of this research is to classify the architectural paradigm of twentieth century fashion design and to observe the architectural forms of the respective eras. It is necessary to have a close observation of the architectural paradigm in twentieth century fashion design where support tools such as the crinoline was avoided and the form and functionality of the garment itself was emphasized. I will conduct this research by considering the architectural form shown in fashion as a practical three-dimensional creation that exists in space.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.65-73
• /
• 2010

To observe and analyze the characteristics of cloud and precipitation properties, the Cloud physics Observation System (CPOS) has been operated from December 2003 at Daegwallyeong ($37.4^{\circ}N$, $128.4^{\circ}E$, 842 m) in the Taebaek Mountains. The major instruments of CPOS are follows: Forward Scattering Spectrometer Probe (FSSP), Optical Particle Counter (OPC), Visibility Sensor (VS), PARSIVEL disdrometer, Microwave Radiometer (MWR), and Micro Rain Radar (MRR). The former four instruments (FSSP, OPC, visibility sensor, and PARSIVEL) are for the observation and analysis of characteristics of the ground cloud (fog) and precipitation, and the others are for the vertical cloud characteristics (http://weamod.metri.re.kr) in real time. For verification of CPOS products, the comparison between the instrumental products has been conducted: the qualitative size distributions of FSSP and OPC during the hygroscopic seeding experiments, the precipitable water vapors of MWR and radiosonde, and the rainfall rates of the PARSIVEL(or MRR) and rain gauge. Most of comparisons show a good agreement with the correlation coefficient more than 0.7. These reliable CPOS products will be useful for the cloud-related studies such as the cloud-aerosol indirect effect or cloud seeding. The visibility value is derived from the droplet size distribution of FSSP. The derived FSSP visibility shows the constant overestimation by 1.7 to 1.9 times compared with the values of two visibility sensors (SVS (Sentry Visibility Sensor) and PWD22 (Present Weather Detect 22)). We believe this bias is come from the limitation of the droplet size range ($2{\sim}47\;{\mu}m$) measured by FSSP. Further studies are needed after introducing new instruments with other ranges.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.2
• /
• pp.184-192
• /
• 2000

Objectives : To inquire the prevalence and the risk factors for myofascial pain syndrome (MPS) on young boys in order to use these results as the fundamental data for the prevention of their MPS. Methods : For 7 days in May 1999, this research was taken on 489 male students ranging from 6th to 12th grade. We randomly selected a class for every group and from these classes we operated physical examinations, self-reported questionnaires and from a rehabilitation doctor, MPS test was taken. Thoracic kyphosis and lumbar lordosis were also taken by using the inclinometer. We defined MPS as a regional pain complaint, palpable taut band that is painful on compression. Results : The shoulder MPS prevalence of the subjects were 29.7 persons/100 persons. The statistics revealed that as grades went up, the percentage significantly increased in the MPS prevalence. As of case-control study, 145 students who were tested postive in all aspects were placed as cases, and 176 students who were perfectly normal as controls on risk factors. As a result of comparing the student groups who were stisfied with their chairs to the student groups were not satisfied, the taller showed a significantly higher odds ratio (p<0.01). By the multiple logistic regression test, we concluded that the MPS disease was prevailed far more in the students in the higher grades (Odds ratio: 1.16, 95% C.I.: 1.03-1.31), and also those who were dissatisfied with their chairs than in the ones who were satisfied (Odds ratio: 1.92, 95% C.I.: 1.17-3.17). Conclusions : Significant correlations showed between the MPS diagnosed group and the students who are dissatisfied with their chairs. As a result, more research and observation has to be made concerning this disease, and the desks and chairs should be adjusted to suit the student's physical standards.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.76-92
• /
• 1998

The purpose of this study was to evaluate the possible efficacy of Nd-YAG laser as a dentin conditioner by observing the laser irradiation dentin surface under scanning electron micrograph and measuring shear bond strength of restored light-cured glass ionomer mold. Fifty intact premolars were prepared for shear bond strength tests. The teeth were randomly divided into five groups as follows; Group I. no treatment Group II. 10% poly acrylic acid, 20 sec Group III. laser treatment 2 w, 20 Hz, 2 sec Group IV. laser treatment 2 w, 20 Hz, 5 sec Group V. laser treatment 2 w, 20 Hz, 10 sec Samples of each group were restored with light-cured glass ionomer cement after dentin conditioning and then measuring the shear bond strength of each specimen were measured using universal testing machine. Additional ten premolars were prepared for SEM analysis The result from the this study can be summarized as follows. 1. Shear bond strength of polyacrylic acid-treated group (II) was significantly higher than other groups (p<0.05). 2. No statistically significant difference could be found between three laser-treated groups (III, IV, V) in shear bond strength(p>0.05) 3. According to the result of observation under SEM, Polyacrylic acid was shown to have removed the smear layer effectively and opened the dentinal tubules, whereas the laser has produced the irregular surface mainly composed of melted and fused structure. The microcracks found in laser-treated groups increased in number with irradiation time and formed the regular mesh-type in 10 sec-irradiation group. 4. The ultrastructural change of dentin surface created by laser irradiation was found to the improper for bonding of the glass ionomer restorative materials. And the lower shear bond strength of laser irradiated group might have been due to the failure to form the suit able dentin surface for the glass ionomer to penetrated into and form the proper micromechanical retention.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.3
• /
• pp.18-27
• /
• 2011

Although information communication technology (ICT) is long regard as very useful tool in today's construction engineering and project management environment, organizations must not only operate based upon its original setting, but also requires on-going observation, additional features and fine-tuning actions before the desirable outcome can be achieved. However, it is a very common phenomenon that organizations purchase the licensed "off-the-shelf-software" package and customize it to suit their own business need. Due to the incapability of such software and inefficient customization, the possible result is making that ICT tool not user-friendly and sometimes the whole system becomes obsolete. The purpose of this paper is to review and report those actions taken (between February 2006 and December 2010) by a construction organization to enhance the performance of its Enterprise Resource Planning (ERP) system launched in December 2002. Such actions include: improving data inputting method; removing the transition bottleneck; introducing crystallization function; revising the organization's "Delegation and Limits of Authority"; publishing the "League Table" amongst users; integrating the 3D Mode into the system and upgrading hardware. Whilst the ultimate goals of such system are well beyond the time limit of this research study, an obvious interim result, achieved by this case studied organization, was winning a landmark project worth US$500 million after the ERP system was functioned properly and effectively. Their experience and success becomes an exemplar which can be borrowed by those companies, from managerial perspectives and as a roadmap, planning to adopt information technology (IT) strategy and use ICT tool in the construction engineering and project management framework. Singapore, where public housing provisions have been a major concern of their citizens as the building stock gets older.