• 베이커리
• /
• no.11 s.340
• /
• pp.78-79
• /
• 1996

• 사료
• /
• s.14
• /
• pp.52-60
• /
• 2005

• Railway Journal
• /
• v.18 no.4
• /
• pp.8-10
• /
• 2015

• The monthly packaging world
• /
• s.308
• /
• pp.48-53
• /
• 2018

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1044-1053
• /
• 2016

In this paper, we consider the secondary users (SUs) who are capable of harvesting energy from ambient radio frequency (RF) signals and are allowed to sequentially sense up to 2 different channels to find out idle channels not occupied by the primary users (PUs). The EH SUs are permitted to transmit data packets only if both idle channels and sufficient energy are available. Compared with traditional SUs, the EH SUs consume energy with data transmission and also harvest energy without additional energy supply. Consequently, the battery state is expected to be fluctuated due to energy consumption and harvesting, and therefore we develop a Markov battery model to provide energy variations at the 2-channel sensing EH SUs. With the proposed battery model, we derive the steady-state probability that the EH SUs completely run out of energy, and the achievable throughput of EH SUs is derived accordingly. To evaluate the proposed Markov battery model, the Monte-Carlo simulation was performed to validate the accuracy of energy outage probability and achievable throughput at the 2-channel sensing EH SUs.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.423-431
• /
• 2017

PURPOSE. The goal of this study was to evaluate the fracture resistances of various monolithic crowns fabricated by computer-aided design and computer-aided manufacturing (CAD/CAM) with different thickness. MATERIALS AND METHODS. Test dies were fabricated as mandibular molar forms with occlusal reductions using CAD/CAM. With different occlusal thickness (1.0 or 1.5 mm), a polymer-infiltrated ceramic network (Enamic, EN), and zirconia-reinforced lithium silicate (Suprinity, SU and Celtra-Duo, CD) were used to fabricate molar crowns. Lithium disilicate (e.max CAD, EM) crowns (occlusal: 1.5 mm) were fabricated as control. Seventy crowns (n=10 per group) were bonded to abutments and stored in water for 24 hours. A universal testing machine was used to apply load to crown until fracture. The fractured specimens were examined with a scanning electron microscopy. RESULTS. The type of ceramics and the occlusal thickness showed a significant interaction. With a recommended thickness (1.5 mm), the SU revealed the mean load similar to the EM, higher compared with those of the EN and CD. The fracture loads in a reduced thickness (1.0 mm) were similar among the SU, CD, and EN. The mean fracture load of the SU and CD enhanced significantly when the occlusal thickness increased, whereas that of the EN did not. CONCLUSION. The fracture loads of monolithic crowns were differently influenced by the changes in occlusal thickness, depending on the type of ceramics. Within the limitations of this study, all the tested crowns withstood the physiological masticatory loads both at the recommended and reduced occlusal thickness.

• Restorative Dentistry and Endodontics
• /
• v.43 no.1
• /
• pp.7.1-7.7
• /
• 2018

Objectives: The aim of this study is to compare the shear bond strengths of ceramic brackets bonded to zirconia surfaces using different zirconia primers and universal adhesive. Materials and Methods: Fifty zirconia blocks ($15{\times}15{\times}10mm$, Zpex, Tosoh Corporation) were polished with 1,000 grit sand paper and air-abraded with $50{\mu}m$ $Al_2O_3$ for 10 seconds (40 psi). They were divided into 5 groups: control (CO), Metal/Zirconia primer (MZ, Ivoclar Vivadent), Z-PRIME Plus (ZP, Bisco), Zirconia Liner (ZL, Sun Medical), and Scotchbond Universal adhesive (SU, 3M ESPE). Transbond XT Primer (used for CO, MZ, ZP, and ZL) and Transbond XT Paste was used for bracket bonding (Gemini clear ceramic brackets, 3M Unitek). After 24 hours at $37^{\circ}C$ storage, specimens underwent 2,000 thermocycles, and then, shear bond strengths were measured (1 mm/min). An adhesive remnant index (ARI) score was calculated. The data were analyzed using one-way analysis of variance and the Bonferroni test (p = 0.05). Results: Surface treatment with primers resulted in increased shear bond strength. The SU group showed the highest shear bond strength followed by the ZP, ZL, MZ, and CO groups, in that order. The median ARI scores were as follows: CO = 0, MZ = 0, ZP = 0, ZL = 0, and SU = 3 (p < 0.05). Conclusions: Within this experiment, zirconia primer can increase the shear bond strength of bracket bonding. The highest shear bond strength is observed in SU group, even when no primer is used.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.18 no.1
• /
• pp.113-145
• /
• 2018

Objective : The purpose of this study is to report about a mid-40's female patient with Prurigo Nodularis, whose symptoms were relieved after Korean medicine treatment alone with Whidam's Su-Gi Therapy. Methods : the patient in this study received only Korean medicine treatment such as herbal medication, acupuncture treatment, cupping therapy and specially Whidam's Su-Gi therapy. Results : After the treatment, the symptoms of Prurigo Nodularis were relieved. Contact Itching Index fell from 10 to 5, and Non-Contact Itching Index fell from 10 to 4. On the whole the Body Heat has risen and skin condition has improved visually. The significance of Meridian Function Check(based on HRV) and skin syndrome is remarkable., Conclusions : This study showed that Whidam's Su-Gi therapy added with Korean Medicine treatment can be an effective choice for Prurigo Nodularis. So, wasting disease, especially immune-reduced syndrome such as Prurigo Nodularis, may also be treated with Korean Medicine alone without side effects.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.3
• /
• pp.6-9
• /
• 2016

The enhancement of mechanical properties of coated conductor (CC) tapes in practical application are usually achieved by reinforcing through lamination or electroplating metal layers on either sides of the CC tape. Mechanical or electromechanical properties of the CC tapes have been largely affected by the lamination structure under various loading modes such as tension, bending or even cyclic. In this study, the influence of brass laminate volume fraction on electromechanical properties of RCE-DR processed Gadolinium-barium-copper-oxide (GdBCO) CC tapes was investigated. The samples used were composed of single-side and both-side laminate of brass layer to the Cu-stabilized CC tape and their $I_c$ behaviors were compared to those of the Cu-stabilized CC tape without external lamination. The stress/strain dependences of $I_c$ in laminated CC tapes under uniaxial tension were analyzed and the irreversible stress/strain limits were determined. As a result, the increase of brass laminate volume fraction initially increased the irreversible strain limit and became gradual. The corresponding irreversible stress limit, however, showed no difference even though the brass laminate volume fraction increased to 3.4. But the irreversible load limit linearly increased with the brass laminate volume fraction.

• Journal of Hydrogen and New Energy
• /
• v.29 no.1
• /
• pp.90-96
• /
• 2018

Reaction characteristics and kinetics of a oxygen carrier (OCN717-R1SU) for chemical looping combustion (CLC) have been investigated using TGA by changing gas concentration (10-30 vol.% $CH_4$) and reaction temperature ($825-900^{\circ}C$). Reaction rate of OCN717-R1SU increased as temperature increased and it was found that reaction is delayed at the initial reaction regime. Johnson-Mehl-Avrami (JMA) model was adopted to explain the reaction phenomenon. The activation energy (E) determined by JMA model in reduction reaction of OCN717-R1SU is $151.7{\pm}2.03kJ/mol$ and pre-exponential factor and JMA exponent were also obtained. The parameters calculated in this study will be applied in design of the reactor and operation conditions for CLC process.