• 한국의류산업학회지
• /
• 제22권3호
• /
• pp.386-398
• /
• 2020

This study compared dip-coating and in situ polymerization methods for the development of nanofiber-based E-textile using polypyrrole. Nanofiber webs were fabricated by electrospinning an aqueous poly (vinyl alcohol) (PVA) solution. Subsequently, the PVA nanofiber web underwent thermal treatment to improve water resistance. Dip-coating and in situ polymerization methods were used to deposit polypyrrole on the surfaces of the nanofiber web. An FE-SEM analysis was also conducted to examine specimen surface characteristics along with EDS and FT-IR that analyzed the chemical bonding between polypyrrole and specimens. The line resistance and sheet resistance of the treated specimens were measured. Finally, an electrocardiogram (ECG) was measured with textile sensors made of the polypyrrole-deposited PVA nanofiber webs. The polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating dissolved in the dip-coating solution and indicated damage to the nanofibers. However, in the case of in situ polymerization, polypyrrole nanoparticles were deposited on the surface and inter-web structure of the PVA nanofiber web. The resistance measurements indicated that polypyrrole-deposited PVA nanofiber webs fabricated by in situ polymerization with an average sheet resistance of 5.3 k(Ω/□). Polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating showed an average sheet resistance of 57.3 k(Ω/□). Polypyrrole-deposited PVA nanofibers fabricated by in situ polymerization showed a lower line and sheet resistance; in addition, they detected the electrical activity of the heart during ECG measurements. The electrodes made from polypyrrole-deposited PVA nanofiber webs by in situ polymerization showed the best performance for sensing ECG signals among the evaluated specimens.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.85-93
• /
• 2004

We have prepared poly(ethylene terephthalate) (PET) nanocomposites filled with two different types of fumed silicas, hydrophilic (FS) and hydrophobic (MFS) silicas of 7-nm diameter, by in situ polymerization. We then investigated the morphological changes, rheological properties, crystallization behavior, and mechanical properties of the PET nanocomposites. Transmission electron microscopy (TEM) images indicate that the dispersibility of the fumed silica was improved effectively by in situ polymerization; in particular, MFS had better dispersibility than FS on the non-polar PET polymer. The crystallization behavior of the nanocomposites revealed a peculiar tendency: all the fillers acted as retarding agents for the crystallization of the PET nanocomposites. The incorporation of fumed silicas increased the intrinsic viscosities (IV) of the PET matrix, and the strong particleparticle interactions of the filler led to an increased melt viscosity. Additionally, the mechanical properties, toughness, and modules of the nano-composites all increased, even at low filler content.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.127-131
• /
• 2003

Acrylonitrile(AN) was solution-polymerized in dimethyl sulfoxide(DMSO) and tertiary butyl alcohol(TBA) at 30, 40, $50^\circ{C}$ using a low temperature initiator, 2,2'-azobis(2,4-dimethylvaleronitrile) (ADMVN). The low temperature polymerization using ADMVN, DMSO, and TBA is to be successful in obtaining high molecular weight polyacrylonitrile(PAN) with less branches by solution polymerization. Throug a polymerization of AN in DMSO at $30^\circ{C}$, PAN having viscosity-average molecular weight$(M_v)$ of 931,000 was obtained. And then, during AN solution polymerization in DMSO and TBA using a cosolvent system the in-situ formation of microfibrillar structure has been discovered at the cosolvent composition of 24/1$(V_{DMSO}/V_{TBA})$. The simultaneous process of gelation and phase separation of long chain molecules may explain the in-situ formation of PAN fibers during polymerization.

• Elastomers and Composites
• /
• 제33권4호
• /
• pp.255-266
• /
• 1998

본 연구는 한대의 modular 치합형 동방향회전 이축 압출기에서 음이온 중합 mechanism을 이용하여 Lauryl lactam 단량체의 고분자합성 도중 EPDM을 투입하여 연속적 중합을 수행한 연구이다. PA 12의 반응 도중 EPDM과 반응블렌드(reactive blend)를 하고 기계적블렌드와 그 물성을 비교 측정하였다.

• 공업화학
• /
• 제35권3호
• /
• pp.260-265
• /
• 2024

반도체 웨이퍼 운반용 tray에 사용하기 위한 반도체 대전방지용 물질을 합성하기 위해 탄소나노튜브를 포함하는 폴리(메틸메타크릴레이트)(PMMA)와 폴리우레탄(PU)의 in-situ polymerization이 설계되고 진행되었다. 새롭게 합성된 복합체는 상업용 장치 제조 공정을 모방한 조건에서 열적특성과 전기전도성 특성을 평가하였다. 이들의 관련 성능을 비교한 결과, 탄소나노튜브를 함유하고 있는 PMMA와 PU 모두 탄소나노튜브 함량이 올라갈수록 열적인 특성이 향상되었으며, 전기전도성 역시 함량이 올라갈수록 증가하는 우수한 성능을 나타내었다. In-situ polymerization을 통한 복합체의 morphology는 FE-SEM을 통하여 확인한 결과 상용성이 우수한 상태로 확인되었다. 탄소나노튜브를 포함하는 PMMA와 PU 모두 반도체 대전방지용 물질로서 사용할 수 있는 우수한 표면저항 값인 10³ Ω/□의 특성 결과를 확인할 수 있었다.

• 공업화학
• /
• 제10권6호
• /
• pp.902-906
• /
• 1999

메틸셀루로스를 호스트고분자로 하고 copper(II) percolate를 산화제로 사용하여 기상상태에서 직접중합방법으로 전도성 복합필름을 합성하였다. 필름으로서 우수한 성형성과 기계강도를 갖고 있는 메틸셀루로즈는 PVA와 키토산과는 달리 피롤에 대하여 높은 친화성을 나타내어서 기상중합시 호스트고분자로 적합하였다. 기상중합법으로 합성된 폴리피롤은 복합재료 내에서 전도성네트워크를 형성하여 전도성 복합필름의 전기전도도는 $10^{-1}-10^{-7}S/cm$를 나타내었다. 피롤이 호스트고분자 내에서의 폴리피롤로 중합이 되는 정도를 UV-vis분광계로 확인하였다. 전도성 복합필름의 전기전도도와 기계강도는 산화제의 농도와 합성시간에 크게 의존하였다. TGA분석결과는 호스트고분자 내에 형성된 폴리피롤은 복합재료의 열적 안정성에 영향을 미치지 않는다. 전자현미경 분석결과 폴리피롤이 복합재료 내에 균일하게 침투하여 분산되어 있음을 나타내었다. DMA를 사용하여 폴리피롤과 호스트고분자와의 상용성을 조사하였으며 dynamic mechanical analysis(DMA) 분석결과 복합재료 내에서 폴리피롤의 함량이 증가되면서 상용성이 점진적으로 저하되었다.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.312-317
• /
• 2006

In the preparation of a polyacrylonitrile (PAN)/sodium montmorillonite (Na-MMT) nanocomposite via an in-situ polymerization method, macroazoinitiator (MAI) was intercalated in the gallery of Na-MMT to enhance the delamination of silicate layers by intergallery polymerization. The exfoliated fine dispersion observed by X-ray diffraction pattern and transmission electron microscopy, the enhanced tensile storage modulus and the thermal decomposition temperature showed that the intercalated MAI was effective in inducing intergallery polymerization and that a poly(ethylene glycol) block linked to a PAN block improved the dispersion of hydrophilic Na-MMT in the polymer matrix.

• 한국의류학회지
• /
• 제23권2호
• /
• pp.326-334
• /
• 1999

Polyaniline(PAn)-nylon 6 composite fabrics were prepared by immersing the nylon 6 fabrics in 100% distilled aniline for specified diffusion time and drawn out. Then the excess aniline on the fabric surface was blotted and successive polymerization was initiate by immersing them into oxidant and dopant solution for in situ polymerization of polyaniline. Consequently highly conductive PAn-nylon 6 composite fabrics could be obtained and the conductivity reaches as high as 10-2 S/cm. The maximum conductivity was obtained when the fabric was immersed in 100% aniline at 4$0^{\circ}C$ for 3hours and polymerization was proceeded in 0.25M ammonium peroxydisulfate solution at 5$^{\circ}C$ for 1hour.

• 한국군사과학기술학회지
• /
• 제12권2호
• /
• pp.228-235
• /
• 2009

We synthesized glycidyl azide monomer(GAM) as a monomer for polymerization of glycidy azide polymer(GAP) which is a promising energetic prepolymer for a plastic-bonded explosive. Using quantitative real-tim in-situ infrared(in-situ IR) spectroscopy, kinetic study on the cationic ring opening polymerization of GAM was carried out. The reaction rate was obtained from monitoring the change of ether C-O stretching band($1050cm^{-1}$) in series IR spectra. The reaction was in accordance with the first-order reaction law for each of reaction temperature at 100/1 mole ratio of [GAM]/[$BF_3*etherate$]. In the ring opening polymerization of GAM, with ratio of [GAM]/[$BF_3*etherate$] to equal 100/1 at various temperature, the activation parameters obtained from the evaluation of kinetic data were ${\Delta}H^*$=14.34kcal/mol, ${\Delta}S^*=-12.31cal/mol{\cdot}K$ and $E_a$=14.89kcal/mol.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.28-33
• /
• 2023

The conventional FRP (Fiber Reinforced Plastic) manufacturing process used thermoset resins for ease of molding but faced the issue of non-recyclability. To address these shortcomings, a new process utilizing thermal plastic resin was developed. However, due to the high viscosity of thermal plastic resin, problems such as fiber deformation and a reduced fiber volume fraction occurred during the high-temperature, high-pressure process. In this study, to overcome the limitations of the conventional process, fiber-reinforced composite materials were manufactured through in-situ polymerization using PLA (Poly L-Lactide) resin in the VA-RTM (Vacuum Assistance Resin Transfer Molding) process. The fiber volume of the produced specimens was calculated, and resin impregnation and porosity were confirmed through optical microscopy. Additionally, molecular weight analysis using GPC (Gel Permission Chromatography) demonstrated improvements over the conventional process and emphasized the essential requirement of temperature control.