• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.79-80
• /
• 2002

This paper presents an experimental study of the effect of rolling speed and surface roughness on the mixed elastohydrodynamic (EHD) lubrication characteristics for point contact formed between a real, random, rough surface, steel ball and smooth glass disc. The Thin Film Colorimetic Interferometry measurement technique has been extended to give detailed information about in-contact deformation of the microgeometry. It has enabled to derive the amplitude reduction curve that shows progressive recovering of ball roughness features with increasing speed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.200-203
• /
• 2007

Carbon nanotubes (CNTs) have attracted an increasing attention due to their superior mechanical properties and potential application in industries. The strength of CNT has been predicted or calculated through several simulation techniques but actual experiments on stress-strain behavior are rare due to its dimensional limit, nanoscale positioning/manipulation, and instrumental resolution. We have attempted to observe straining responses of a multi-walled carbon nanotube (MWNT) with different growth methods by performing an in-situ tensile testing in a scanning electron microscope. Linear deformation and fracture behaviors of MWNT were successfully observed and its force-displacement curve was also measured from the bending stiffness and displacement of the force sensor and manipulator. We also obtained different tensile load of carbon nanotube with different growth methods.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.129-134
• /
• 2003

It is very important to pay careful attention to construction of bridge/earthwork transition zone for high-speed railway. The transition zone of the railway is the section which roadbed stiffness is suddenly varied. Differences in stiffness have dynamic effects and these increase the forces in the track and the extent of deformation. An abrupt change of stiffness across two adjacent track portions cause irregular settlement of roadbed, track irregularity, lack of girder bending moment and reduction of lateral resistance. Especially on high-speed railway, track irregularity of transition zone cause sincere effect to track stability and train safety. And so continuous maintenance is needed. To verify this effect and to improve transiton zone capacity, In situ test, track irregularity and train acceleration test were performed on high-speed railway bridge/earthwork Transiton Zone.

• 터널과지하공간
• /
• 제1권2호
• /
• pp.218-228
• /
• 1991

Natural stress measurements have been made at two sites at the depth of 280m from surface by means of stress relief overcoring methods using three directonal deformation gage. Attempts have been made to determine the state of natural stress in the rock and provide useful basic data to investigate the stress distribution and the determination of yield zone around powerhouse cavern. The magnitude and the direction of the miximum principal stress obstained from in-situ stress measurements is -96.1kgf/$\textrm{cm}^2$ and N38$^{\circ}$W, N35$^{\circ}$W respectively. Vertical stresses are in approximately agreement with the theoretical value. The ratio of measured to theoretical stresses are 85% at two sites. The ratio of average horizontal to vertical stresses(k=($\sigma$h)ave/$\sigma$v is 1.07.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.83-94
• /
• 2000

본 연구에서는 국내에서 PMT의 적용성, 시험절차, 그리고 시험결과로부터 지반의 전단강도정수 $(cu,\phi)$와 변형특성치 (E)를 결정하는 절차등을 고려하였으며, Elastometer-200을 사용하여 부산지역의 해저지반 3개지역, 6개 시추공에서 PMT를 수행하였다. 시험과정에서 발생되었던 문제점들을 분석하였으며 시험결과를 분석하였다. PMT 시험공의 정지압력은 프레셔미트곡선에서 직접 판독할 수 있었으며, 한계압력 ｐ 은 외삽적인 방법인 $ｐ-log(\Deltav/v)$방법에 의하여 결정할 수 있었다. 또한 지반의 강도정수$(cu,\phi)$와 변형계수(E)도 구할수 있었으며, PMT결과로 구한 지반 특성치는 실내실험에서 구한 특성치보다 크게 평가되었다.PMT결과로 지반의 종류를 개략적으로 평가할 수 있었다. 부산지역 해저지반의 경우, ｐ 의 값은 점성토의 경우 6.4~22.5 $kg/cm^2$, 사질토의 경우 2.2~30.0$kg/cm^2$, 풍화토의 경우 13.0~58.0$kg/cm^2$, , 풍화암의 경우 47.0~190.0 $kg/cm^2$의, 범위에 있었다. 또한, Em/ｐ 은 점성토의 경우 2.4~7.6, 사질토의 경우 2.6~12.1, 풍화토의 경우 6.8~17.1, 풍화암의 경우 7.2~29.6의 범위에 있었다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.441-448
• /
• 2002

Dispersions of non-soluble ceramic particles in a metallic matrix can enhance the strength and heat resistance of materials. With the advent of mechanical alloying it became possible to put the theoretical concept into practice by incorporating very fine particles in a flirty uniform distribution into often oxidation- and corrosion- resistant metal matrices. e.g. superalloys. The present paper will give an overview about the mechanical alloying technique as a dry, high energy ball milling process for producing composite metal powders with a fine controlled microstructure. The common way is milling of a mixture of metallic and nonmetallic powders (e.g. oxides. carbides, nitrides, borides) in a high energy ball mill. The heavy mechanical deformation during milling causes also fracture of the ceramic particles to be distributed homogeneously by further milling. The mechanisms of the process are described. To obtain a homogeneous distribution of nano-sized dispersoids in a more ductile matrix (e.g. aluminium-or copper based alloys) a reaction milling is suitable. Dispersoid can be formed in a solid state reaction by introducing materials that react with the matrix either during milling or during a subsequent heat treatment. The pre-conditions for obtaining high quality materials, which require a homogeneous distribution of small dis-persoids, are: milling behaviour of the ductile phase (Al, Cu) will be improved by the additives (e.g. graphite), homogeneous introduction of the additives into the granules is possible and the additive reacts with the matrix or an alloying element to form hard particles that are inert with respect to the matrix also at elevated temperatures. The mechanism of the in-situ formation of dispersoids is described using copper-based alloys as an example. A comparison between the in-situ formation of dispersoids (TiC) in the copper matrix and the milling of Cu-TiC mixtures is given with respect to the microstructure and properties, obtained.

• The Plant Pathology Journal
• /
• 제39권3호
• /
• pp.265-274
• /
• 2023

Citrus black rot is a serious disease of citrus plants caused by Alternaria citri. The current study aimed to synthesize zinc oxide nanoparticles (ZnO-NPs) by chemically or green method and investigate their antifungal activity against A. citri. The sizes of synthesized as measured by transmission electron microscope of ZnO-NPs were 88 and 65 nm for chemical and green methods, respectively. The studied prepared ZnO-NPs were applied, in vitro and in situ, at different concentrations (500, 1,000, and 2,000 ㎍/ml) in post-harvest treatment on navel orange fruits to verify the possible control effect against A. citri. Results of in vitro assay demonstrated that, at concentration 2,000 ㎍/ml, the green ZnO-NPs was able to inhibit about 61% of the fungal growth followed by 52% of chemical ZnO-NPs. In addition, scanning electron microscopy of A. citri treated in vitro with green ZnO-NPs showed swelling and deformation of conidia. Results showed also that, using a chemically and green ZnO-NPs at 2,000 ㎍/ml in situ in post-harvest treatment of orange, artificially-infected with A. citri, has reduced the disease severity to 6.92% and 9.23%, respectively, compared to 23.84% of positive control (non-treated fruits) after 20 days of storage. The out findings of this study may contribute to the development of a natural, effective, and eco-friendly strategy for eradicating harmful phytopathogenic fungi.

• 자원환경지질
• /
• 제39권4호
• /
• pp.451-471
• /
• 2006

암반공학 관련 국책과제로부터 암반공학 분야의 주요 연구과제와 연구 내용을 분석해 본 견과를 요약하면 다음과 같다. $\cdot$ 암반공학은 암석 혹은 현지 암반의 변형, 파괴 그리고 변위에 대한 것을 주 연구 내용으로 하고 있으며, 지질학적인 기초를 요구하는 학문이다. 암반내에 존재하는 불연속면은 지하공간을 포함하는 암반의 거동을 결정하는 가장 중요한 변수이다. $\cdot$ 현장조사와 시험의 기본적인 목적은 암반의 강도 정수의 결정과 현지 암반의 응력 상태를 규명하는데 있으며, 실험실 시험 혹은 현장 시험은 반드시 대상 암반의 역학적 거동을 대표할 수 있도록 수행되어야 한다. $\cdot$ 수치해석의 견과는 그 결과가 비록 정량화되었더라도 정성적인 기준에 의해 평가되는 것이 타당하다. 암반의 변위 거동을 면밀하게 계측하여야 NATM의 기본 개념에 맞는 올바른 터널과 지하공간의 설계와 시공이 가능하며, 암반 사면의 안정성을 분석하는데 있어 역해석에 의해 산정된 강도 정수가 전제되어야 할 것으로 평가된다.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.295-312
• /
• 2017

Cast in situ and grouted concrete helical piles with 150-200 mm diameter half cylindrical ribs have become an economical and effective choice in Shanghai, China for uplift piles in deep soft soils. Though this type of pile has been successful used in practice, the reinforcing mechanism and the contribution of the ribs to the total resistance is not clear, and there is no clear guideline for the design of such piles. To study the inclusion of ribs to the contribution of shear resistance, the shear behaviour between silty sand and concrete slabs with parallel ribs at different spacing and angles were tested in a large direct shear box ($600mm{\times}400mm{\times}200mm$). The front panels of the shear box are detachable to observe the soil deformation after the test. The tests were modelled with three-dimensional finite element method in ABAQUS. It was found that, passive zones can be developed ahead of the ribs to form undulated failure surfaces. The shear resistance and failure mode are affected by the ratio of rib spacing to rib diameter. Based on the shape and continuity of the failure zones at the interface, the failure modes at the interface can be classified as "punching", "local" or "general" shear failure respectively. With the inclusion of the ribs, the pull out resistance can increase up to 17%. The optimum rib spacing to rib diameter ratio was found to be around 7 based on the observed experimental results and the numerical modelling.

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.17-23
• /
• 2004

굴양식장에서 폐기물로 처리되는 굴패각을 지반재료로 이용하기 위해서 굴패각-모래 혼합토의 강도 및 변형 특성에 대해 조사하였다. 타설된 모래다짐말뚝 재료의 강도는 표준관입시험(SPT)에 의해 현장에서 타설된 모래다짐말뚝 강도를 확인하는 것으로 되어있다. 그러나 모래는 표준관입시험에서 얻어진 N값과 내부마찰각의 관계에 대해 상당히 밝혀져 있으나, 굴패각-모래 혼합토에 대해서는 N값과 내부마찰각의 관계가 연구되어 있지 않다. 본 연구논문에서는 단위체적중량이 다양한 굴패각-모래 혼합토를 대형 모형토조에서 표준관입시험 및 대형 직접전단시험을 수행하여 N값, 단위체적중량, 내부마찰각의 상호 상관성을 제시하였다. 이러한 연구결과는 현장에서 표준관입시험을 통한 굴패각-모래 혼합토의 강도 평가가 가능하게 했으며 구속압축시험을 통하여 체적압축계수를 산정하고 혼합토의 예상침하량을 계산할 수 있게 하였다.