• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.37-45
• /
• 2022

In-situ pilot experiment was carried out to establish a countermeasure on the soil loss from the hill side uplands that was rehabilitated by soil remediation method nearby abandoned mine sites for 2 years. It was considered that the affect of an inclination of cover surface, a stabilization treatment of cover layer by lime and steel refining slag (SRS) and a vegetation of soil surface as an effect factors in the experiment. It was constructed 4 lysimeters (plots, 22 m long, 4 m width) on the hilly side (37% inclination). One plot was control and two plots was treated by 1% lime and SRS. A remind one plot was modified a inclination to 27% to compare the affect of inclination on the amount of cover soil loss. It was attached a reservior tank and water level gauge in the end of lysimeters to measure the amount of the surface water flow and soil loss. It was also installed the automated sensors that could be collect the precipitation, soil moisture content, tension of cover layer in each plots. It was observed that the event of precipitation were caused the soil loss and it were related the physical and chemical properties of cover soil and inclination of surface layer of plots. During the experiment, it was exceeded the national regulation (50 t/ha/yr) in 37% inclination plots even though it was vegetated on the cover soil surface. However, in 27% inclination plot, it was shown that the amount of soil loss was maintained below the national regulation and, more ever, vegetation could reduce the the amount of soil loss. Therefore it was expected that such results could be applied to the future design of rehabilitation projects on the polluted farmland nearby abandoned mine sites.

• Journal of Veterinary Science
• /
• v.24 no.1
• /
• pp.12.1-12.10
• /
• 2023

Background: Arthroscopic exploration of ventromedial part of canine coxofemoral joint is limited in conventional dorsal approach. Objectives: We evaluated the efficacy of a medial arthroscopic approach to the coxofemoral joint of dogs by analyzing the joint visible area and performing a safety analysis. Methods: Arthroscopic approaches to the coxofemoral joint were made in five cadavers using a traditional (dorsal) and novel (medial) approach. Three observers scored the visible area of images and videos of the acetabulum and femur. A safety analysis was performed via dissection of the medial hind limb. The distance between neurovascular structures and arthroscopic portals was measured. Results: The acetabulum was more visible in the dorsal than in the medial approach, with mean visualization scores of 16 ± 0.00 and 11.83 ± 1.26, respectively. The medioventral side of the femur was significantly more visible in the medial than in the dorsal approach, with mean visualization scores of 3.9 ± 0.99 and 6.93 ± 0.58, respectively. Safety analysis confirmed the medial portal site was safe, provided that the surgeon has comprehensive knowledge of the joint. The minimum distance from the arthroscopic medial portals to the nearest neurovascular structures was 2.5 mm. Conclusions: A medial arthroscopic approach to the canine coxofemoral joint has potential clinical application. Dorsal and medial approaches differ significantly and have distinct purposes. The medial approach is useful to access the ventromedial joint, making it an eligible diagnostic method for an arthroscopic evaluation of this area.

• The Journal of Engineering Geology
• /
• v.31 no.2
• /
• pp.135-148
• /
• 2021

Ground subsidence risk ratings obtained from the site investigation during pre-excavation stages could be changed depending on the parameters revealed during construction activities. A method of correcting the pre-excavation ground subsidence risk ratings based on the site conditions observed in the field is suggested in this study. The elevation of groundwater table during the excavation may be different from the predicted value depending on the application of waterproofing methods and construction conditions. The drastic drawdown of groundwater table during the excavation could cause ground subsidence due to soil volume decrease related to consolidation or compression of the ground, whereas the rising of groundwater table caused by the intense rainfall may result in a high potential for ground subsidence due to heaving or boiling of the excavation bottom. Excessive displacements of retaining walls or ground settlements may cause ground subsidence, which also results in a high risk of ground subsidence caused by the destruction of buried pipelines. Reevaluation of ground subsidence risk ratings is suggested considering the fluctuation of groundwater table, condition of groundwater leakage, measured ground displacements, and soil types. Finally, the ground subsidence risk rating system is improved for better evaluation by using 12 factors in 5 categories.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.63-80
• /
• 2022

As a technology to analyze and predict an issue has been developed by constructing real space into virtual space, it is becoming more important to acquire precise spatial information in complex cities. In this study, images were acquired using an unmanned aerial vehicle for urban area with complex landscapes, and land cover classification was performed object-based image analysis and semantic segmentation techniques, which were image classification technique suitable for high-resolution imagery. In addition, based on the imagery collected at the same time, the replicability of land cover classification of each artificial intelligence (AI) model was examined for areas that AI model did not learn. When the AI models are trained on the training site, the land cover classification accuracy is analyzed to be 89.3% for OBIA-RF, 85.0% for OBIA-DNN, and 95.3% for U-Net. When the AI models are applied to the replicability assessment site to evaluate replicability, the accuracy of OBIA-RF decreased by 7%, OBIA-DNN by 2.1% and U-Net by 2.3%. It is found that U-Net, which considers both morphological and spectroscopic characteristics, performs well in land cover classification accuracy and replicability evaluation. As precise spatial information becomes important, the results of this study are expected to contribute to urban environment research as a basic data generation method.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.124-130
• /
• 2020

PURPOSE. The aim of this in vitro study was to evaluate the effect of sintering procedures on marginal discrepancies of fixed partial metal frameworks fabricated using different sintering-based computer-aided design and computer/aided manufacturing (CAD/CAM) techniques. MATERIALS AND METHODS. Forty resin die models of prepared premolar and molar abutment teeth were fabricated using a three-dimensional (3D) printer and divided into four groups (n = 10) according to the fabrication method of metal frameworks used: HM (via hard milling), SM (via soft metal milling), L25 (via direct metal laser melting [DMLM] with a 25 ㎛ layer thickness), and L50 (via direct DMLM with a 50 ㎛ layer thickness). After the metal frameworks were fabricated and cemented, five vertical marginal discrepancy measurements were recorded in each site (i.e., buccal, facing the pontic, lingual, and facing away from the pontic) of both abutment teeth under a stereomicroscope (×40). Data were statistically analyzed at a significance level of 0.05. RESULTS. No statistically significant differences (P>.05) were found among the four axial sites of metal frameworks fabricated by sintering-based CAD/CAM techniques. The HM and L25 groups showed significantly (P<.001) lower marginal discrepancy values than the SM and L50 groups. CONCLUSION. Marginal discrepancy in the sites facing the pontic was not influenced by the type of sintering procedure. All fabrication methods exhibited clinically acceptable results in terms of marginal discrepancies.

• Archives of design research
• /
• v.13 no.3
• /
• pp.81-90
• /
• 2000

There are a great number of difficulties without Interface Guideline, even though the utility of the web in the educational field has been increased. In spite of having a guideline there still remains problems, when the researcher develops a practical web design, because of uniformity and universality. The purpose of this research will give a good model and a guideline, developing a way of web-site assessment through psychological language. First, the researcher has to induce psychological language and recognize the relevance of the principle of device system. Second, they should build an assessment model based on an established system of classification. As a result, they recognized that an assessment model based on the system of psychological language can help in working out authentic design problems. The designer faces many difficulties when using Interface Guideline for the sake of the existing software developer because of specific terminology. On the contrary, these days, the guideline of psychological language system provides the designer with easy comprehension of language and also able to perceive problems in advance. In addition, the researcher can realize that it can be used, as a good source and data.

• The Journal of Korean Physical Therapy
• /
• v.18 no.6
• /
• pp.43-49
• /
• 2006

Purpose: Changes of degenerative disc have been analyzed or with the Magnetic Resonance Imaging (MRI) to assign appropriate meaning, and the relationship between the degenerative changes of the discs and its living function has been evaluated through the living function evaluation scores collected by functional rating index. Methods: in April, 2006, a physical examination was conducted for physical laborers to be employed as on-site laborer in a steel industrial complex located at a region. A month later, these 20 laborers who participated in lumbar vertebra MRI tests have been investigated for one-to-one mobile phone functional rating index test. Excluding 3 of 14 respondents whom scored 0 in functional rating index, the rest of respondents' degenerative disc grade changes shown in MRI and its relationship to living functional rating index have been performed. Results: The Dabbs method of measuring disc height resulted to show significant increase as the disc height changes from L1-2 level to L5-S1 level (p<0.01). However, there was no statistical significance with a relationship between disc height and functional rating index, and disc height average. The Magnetic Resonance Imaging analysis regard on the degree of disc degeneration and its relationship to living functional rating proved to have significant relationship (p<0.05). Conclusion: The degenerative changes monitored by Magnetic Resonance Imaging show significant relationship (p<0.05) to living function. However, this relationship could vary depend upon the characteristics of study population. So, it suggested that the future studies should be performed by considering population's age and job career.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.349-353
• /
• 2014

Background: Although previously studies have reported that most patients with malignancy prefer to die at home, this is not the real situation in clinical practice. Aim: In this study, we aimed to determine the characteristics of Turkish cancer patients admitted to the emergency department (ED) within one month before death. Materials and Method: This descriptive retrospective study focused on questions about how often and why patients with cancer visited the ED before death. A total of 107 individuals with cancer were divided into 2 groups: Group 1, patients with at least one visit in the final 4 weeks; and Group 2, patients with no visit to ED. Demographic and clinical features were compared between the two groups. Statistical analyses: Descriptive statistical methods, statistical analysis for correlation, Student's t-test, chi-square tests and logistic regression were used. Results: At least one visit to ED within one month before death was reported for 64 (60%) of the 107 cases. Of these 64 (Group 1), 38% (n=24) were discharged and 9% (n=6) died in the ED. The most common site of the primary tumor was the lung (n=24, 38%) and the most common symptom was dyspnea (92%). With the other 43 (40%) cancer patients not presenting to the ED within one month before death, they were more likely to be female with another type of cancer. Conclusions: Guidelines are needed for better management of cancer patients benefiting from visits to ED within the last month of life.

• Tuberculosis and Respiratory Diseases
• /
• v.70 no.6
• /
• pp.504-510
• /
• 2011

Background: $^{67}Ga$ scintigraphy has been used for years in sarcoidosis for diagnosis and to determine the extent of the disease. The present report is a study of various findings of $^{67}Ga$ scintigraphy in patients with sarcoidosis. Methods: Between 1998 and 2007, 16 patients (male：female, 6:10; age, $35.9{\pm}15.3$ years) with histologically proven sarcoidosis underwent clinical evaluation and $^{67}Ga$ scintigraphy. According to the site of involvement, they were divided into subtypes and analyzed. Results: Sixteen patients with sarcoidosis had involvement of various organs, including lymph nodes (13/16, 81.3%), lung (3/16, 18.8%), muscle (1/16, 6.3%), subcutaneous tissue (1/16, 6.3%), glands (1/16, 6.3%), and bone (1/16, 6.3%). Sites of involved lymph nodes were thorax (12/13, 92.3%), supraclavicular area (5/13, 38.5%), inguinal area (2/13, 15.4%), abdomen (2/13, 15.4%), and pelvis (1/13, 7.7%). Conclusion: Because sarcoidosis frequently involves multiple organs, $^{67}Ga$ scintigraphy is a useful method in for evaluating the whole body. Nuclear medicine physicians should be familiar with the various findings of gallium uptake in sarcoidosis.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1303-1308
• /
• 2007

Recently, precast concrete tracks are replacing ballast track for efficient and economic maintenance of track. Precast concrete railroad tracks are manufactured in factory, and transported to railroad construction site for installation. Therefore, quality of precast concrete track itself should be sufficiently good. On the contrary to the convenient manufacturing of precast concrete track, the installation of a precast concrete track requires careful steps. Typically, a precast concrete track is placed on an approximately 15-cm thick lean concrete layer. A mortar is filled between lean concrete layer and precast concrete track to adjust the sloping angle of a precast concrete track for a safe train operation at a curvy section. Then, the use of filled mortarproduces a void underneath a precast concrete track, which is harmful to structural safety of a precast concrete track undercyclic loading. Therefore, it is essential to make sure that there is no void left beneath a precast concrete track after mortar filling. In the continuous resonance method, the amplitude of frequency response measured using an instrumented hammer and an accelerometer is plotted against a pseudo-depth, which is half of the wave velocity divided by frequency. The frequency response functions are measured at consecutive measurement locations, 6-cm interval between measurement points, and then combined together to generate a 2-D plot of frequency response. The sections with strong reflections or large amplitude of frequency response are suspicious areas with internal voids and unfilled areas. The 2-D frequency response plot was efficient in locating problematic sections just by examining the color shade of a visualized plot in 2-D format. Some of the problematic sections were drilled to make a visual inspection of mortar filling. The visual image of interface between mortar and precast concrete track was verified using the validity of the continuous resonance technique adopted in this research.