• 대한후두음성언어의학회지
• /
• 제18권1호
• /
• pp.26-32
• /
• 2007

Objective and Background: Laryngeal stroboscope is an useful equipment in evaluation of vocal cord vibration and in early detection of mucosal lesion including invasive cancer of the vocal cord. Recently Lee et al. (2006) developed portable stroboscope using voice as synchronization signal. It has been frequently impaired ability to synchronize the flashes even in normal female. Authors tried to investigate various methods including vibration pick-up, microphone, laryngeal microphone, and contact microphone for development of simple and accurate method like electroglottograph signal. The purpose of this study was to estimate wheher the vibration pick-up is available and is consistent with the signal of EGG. Subjects and Methods: Authors compared the signals between EGG and noncontact method such as voice, contact methods including vibration pick-up, laryngeal microphone, and contact microphone in normal twenty adults (male 10 and female 10). The number of peak in one cycle was compared with the number of the peak in EGG, and the percent of phase difference in the peak was compared with EGG Also, authors tried to investigate which site of vibration pick-up was most effective for synchronization of stobo flashes. Three site including anterior neck below the cricoid cartilage, thyroid ala, and suprahyoid region were analysed. Results: Among various methods for synchronization of strobo flashes, vibration pick-up was most effective method in peak detection. And anterior neck below cricoid cartilage was the most available site of the vibration pick-up. Conclusion: Authors suggest that vibration pick-up is most available and effective method for synchronization of strobo flashes.

• 한국산림과학회지
• /
• 제96권1호
• /
• pp.40-47
• /
• 2007

본 연구는 전라북도 진안 지역의 낙엽송을 대상으로 지위지수 추정과 지위지수곡선 유도 및 간재적식 개발을 목적으로 하였다. 지위지수에 대한 식은 대수차분 방정식에 의해 개발되었다. 기초 연령 40년으로 한 다형 지위지수 패밀리 곡선은 Schumacher 수고 방정식을 기초로 표현하였다. 최적의 간재적 추정식은 $V=0.00260+0.00000399D^2H$로 판명되었다. 이 방정식에 사용한 동시 F-검정에서 추정된 간재적량은 모델 평가에 관한 실측된 간재적량과 유의(${\alpha}=0.05$)하게 다르지 않음을 보여주었다. 지위지수 곡선과 재적 추정식의 결과는 지위와 수확표 조제시 기초 자료로 제공할 수 있고, 진안지역 낙엽송 임분의 지역 산림경영에 사용될 수 있을 것이다.

• 공학교육연구
• /
• 제24권4호
• /
• pp.21-29
• /
• 2021

The objective of this research is to devise a BARS evaluation system as a performance evaluation plan for non-face-to-face capstone design and to verify the validity through the expert FGI as the remote education is highlighted as a new normal standard in the post corona epoch. The conclusion of this research is as follows. First, the non-face-to-face capstone design is a competency centered subject that allows you to develop the engineering and majoring knowledge and its function and attitude, and the achievement of program outcome is the objective competency, and the researcher proposes the BARS method evaluation, one of competency evaluation method, as a new performance evaluation plan. Second, for the evaluation of PO achievement of non-face-to-face capstone design, the researcher deduced 20 behavior identification standard(anchor) of BARS evaluation system, and developed the achievement standard per 4 levels. Third, as the evaluation tool of non-face-to-face capstone design, the presentation data(PPT), presentation video, product such as trial product(model), non-face-to-face class participation video, discussion participating video, team activity report, and result report for the evidential data of BARS evaluation were appeared as proper. Finally, the BARS evaluation plan of non-face-to-face capstone design would be efficiently made through the establishment of evaluation plan, the establishment of grading standard of BARS evaluation scale, the determination of evaluation subject and online BARS evaluation site.

• 해양환경안전학회지
• /
• 제5권1호
• /
• pp.9-18
• /
• 1999

To predict the oil spill dispersion phenomena in the ocean, the oil spill response model, which can be used for strategic purpose on the oil spill site, based on Lagrangian particle-tracking method was formulated and applied to the neighboring area with Pusan port where the oil spill incident occurred when the tanker ship No.1 Youil struck on a small rock near the Namhyungjeto on September 21, 1995. The real-time tidal currents to be required as input data of the oil spill model were obtained by the two-dimensional hydrodynamic model and the tide prediction model. Evaluation of tidal currents using observation data was successful. For wind data, other input data of oil spill model, observed data on the spot were used. To verify the oil spill model, the oil spill modelling results were compared with the field data obtained from the spill site. Compared the modelling results with the observation data, there exist some discrepancies but the general pattern of modelling results was similar to that of field observation. The modelling results on 7 days after spill occurred showed that the 40% of spilled oil is in floating, 36% in evaporated, 23% at shore, and 1% in out of boundary, respectively. According to the evaluation of weighting curves of effective components to the dispersion of oil, the winds make a 37% of contribution to the dispersion of oil, turbulent diffusion 39.5%, and tidal currents 23.5%, respectively. Provided the more accurate wind data are supported, more favorable results might be obtained.

• 성인간호학회지
• /
• 제17권3호
• /
• pp.411-424
• /
• 2005

Purpose: The purpose of this study was to develop and evaluate e-EBPP(Evidence-based Practice Protocol) system for nursing care for patients with dementia to facilitate the best evidence-based decision in their dementia care settings. Method: The system was developed based on system development life cycle and software prototyping using the following 5 processes: Analysis, Planning, Developing, Program Operation, and Final Evaluation. Result: The system consisted of modules for evidence-based nursing and protocol, guide for developing protocol, tool for saving, revising, and deleting the protocol, interface tool among users, and tool for evaluating users' satisfaction of the system. On the main page, there were 7 menu bars that consisted of Introduction of site, EBN info, Dementia info, Evidence Based Practice Protocol, Protocol Bank, Community, and Site Link. In the operation of the system, HTML, JavaScript, and Flash were utilized and the content consisted of text content, interactive content, animation, and quiz. Conclusion: This system can support nurses' best and cost-effective clinical decision using sharable standardized protocols consisting of the best evidence in dementia care. In addition, it can be utilized as an e-learning program for nurses and nursing students to learn use of evidence based information.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.293-301
• /
• 2021

LTV(Light Tactical Vehicle) operating in our military requires higher levels of performance and durability to withstand harsher conditions than general vehicles, as they must travel on both rough-train and off-road as well as on public roads. Recently, LTV development is demanded a variety of test evaluations in order to satisfy ROC (Required Operational Capability) by the military requirement. However, there is no informations of driving test course for satisfying the durability performance of Korean tactical vehicle. Therefore, this study aims to provide basic data to establish reliable drive test conditions by analyzing the main maneuvering test site at the domestic and foreign country in order to select the representative drive course. These studies will provide a more scientific and systematic evaluation solution for the development of tactical vehicles, and can be effectively used to establish a certified system for military vehicle test evaluation in the future

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.39-44
• /
• 2004

A heat and room temperature construction method of asphalt have been mainly applying to rooftop waterproofing in concrete structure, and the rest construction method are sheet, membrane and mortar waterproofing construction method. In particular, joint method in sheet waterproof method is as overlap joint which on being reinforced with fiber and tape, have been applying for job site to mechanical fix using protection disk and anchorage and metal ironwork on the end of sheet. These construction method cause cutting off joint of sheet as behavior of structure according to repairs of sheet itself and thermal conduct, outdoor air environment. In conclusion, we analyzed and examined the application of various sheets and piece ashes about superior 'I' joint which divide from one and the other sheet and progressed about joint construction method of fixing method for overlap.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2875-2880
• /
• 2024

The development of nuclear power plants is in three phases. The first phase is a consideration before the decision on the NPP construction program is approved, the second phase is the preparatory work for making contracts and preparing for the construction of NPP after the NPP construction policy is approved, and the third phase is contracting, licensing and building the first NPP. As a volcanically active country, Indonesia contains over 130 active volcanoes that are part of the Pacific Ring of Fire. The volcanic aspect is one of the safety factors considered while deciding the location of an NPP. Research on the potential of natural external risks to the determination of nuclear power plants in Indonesia, including the volcanic aspect, has been conducted based on the safety reference or safety guide of the IAEA and the Nuclear Energy Regulatory Body (BAPETEN) Regulation. Due to technological advancements, safety needs have evolved so the existing Indonesia National Standard (SNI) must be updated to comply with BAPETEN regulations. The substance in SNI 18-2034-1990 relating to volcanic features seems less relevant in actual conditions, given that more complete and exact criteria for determining a site guarantee the safety and health of residents and surrounding the environment site. The study intends to conduct a gap analysis of volcanic issues in SNI and volcanic regulations. The method used is identification requirements for volcanic aspects in SNI 18-2034-1990 about Determining Site of Nuclear Reactor Guidance with BAPETEN Chairman Regulation (BCR) number 4 of 2018 about Nuclear Installation Site Evaluation Safety Provisions and BCR number 5 of 2015 about Evaluation of Nuclear Installation Sites for Volcanic Aspects, and analysis uses a qualitative method of inductive techniques. The outcome of this research applies to suggesting a revision of SNI number 18-2034-1990, especially the volcanic aspect.

• 한국건설관리학회논문집
• /
• 제19권2호
• /
• pp.50-60
• /
• 2018

최근 인력자원 투입량 감소 및 공기단축이 가능한 모듈러 건축공법은 반복 공정이 많은 기숙사, 주거시설, 호텔 공사 등에 다양하게 적용되고 있다. 모듈러 건축공법은 유닛 설치비용을 제외한 현장 공사비에서 외장 마감공사 비용의 비중은 약 40%를 차지하며, 마감공사는 목표공기와 비용을 유지하는데 주요한 역할을 한다. 모듈러 현장에서 유닛 설치 및 마감공사 수행을 위해 한정된 장비가 후속 액티비티에 영향을 주지 않도록 공유되어야 하며 현장 마감 비중이 커지는 모듈러 프로젝트일수록 공정관리에서 양중 계획은 매우 중요하기 때문이다. 이와 같은 T/C 운용 계획은 단일 사이클 또는 다중 사이클의 형태를 가지게 되며 사이클 주기 조율은 장비효율을 높일 수 있다. 그러나 유닛 설치 및 마감공사를 지원하기 위한 T/C 운용 계획의 대안을 평가하는데 어려움이 있다. 따라서 본 연구는 모듈러 건축 현장에서 T/C 운용의 사이클 주기 설정에 따른 운용방식의 대안을 평가하기 위해 유닛 양중 시간 및 주기, 외장재 양중 시간, 마감 작업 소요시간을 변수화하여 T/C 가동시간과 공정에 주는 영향을 파악한다. 이러한 목적을 달성하기 위해 현장에서 이루어지는 작업 프로세스 분석을 바탕으로 작업 속도를 조절하여 T/C 효율을 증대시킬 수 있는 시뮬레이션 모델을 개발한다. 본 연구는 양중 사이클 개념을 적용한 자원 평준화 방법을 제시함으로써 학술적 기여가 있으며 실무적으로 현장관리자에게 장비 계획의 대안 선택을 위한 기초자료로서 활용될 수 있을 것이다.

• 시스템엔지니어링학술지
• /
• 제19권1호
• /
• pp.107-113
• /
• 2023

For one-shot systems such as 81mm high-explosive ammunition, research on performance prediction is insignificant due to research manpower infrastructure and lack of interest and difficulties in securing field data, which can only be done by special task workers. In order to evaluate the actual range of ammunition, the storage ammunition reliability evaluation checks the range by firing actual ammunition through a functional test. Test evaluation is a method of extracting a sample from the population, launching it, and recording the results accordingly. As a result of these tests, the range, which is an indicator of ammunition performance, can be measured differently according to meteorological factors such as temperature, atmospheric pressure, and humidity according to the location of the test site. In this study, various environmental factors generated at the test site and storage period analyze the correlation with the range, which is the performance of ammunition, and analyze the priority of importance for each factor and the numerical standards that environmental factors affect range. Through this, a new approach to one-shot system performance prediction was presented.