• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.99-105
• /
• 1995

This paper provides a highly efficient grinding for ferrous materials using ELID-grinding method. The grinding efficiency using ELID gring method with CIFB-cBN wheel and CB-cBN wheel is compared with general grinding method with V-cBN wheel. This paper measured grinding ratio for plunge grinding and grinding resistance for traverse grinding in order to investigate grinding ability. The results show that ELID grinding methods is useful for the high efficient grinding of ferrous materials.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.365-372
• /
• 2010

Irradiation has been recognized as a highly suitable tool to aid in the formation of hydrogel. The radiation process has various advantage, such as easy process control and the lack of necessity for initiators and crosslinker. In this study, the hydrogel containing the citrus fermentation gel for the wound healing were successfully synthesized. The strength of hydrogel was increased as a function of a increasing the concentration of citrus and the irradiation doses. In addition, this hydrogel have been evaluated by the cytotoxicity and animal experiment.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.270-278
• /
• 2001

Hydrogels for wound dressing were manufactured using poly(vinylalcohol)(PVA) and poly(N-vinylpyrrolidone)(PVP). The hydrogels were obtained by exposing to $^{60}$ Co${\gamma}$-rays after freezing and thawing of aqueous solutions of PVA and PVP to improve mechanical strength. Mechanical properties such as gelation, water absorptivity and gel strength were examined after repeating the \"freezing and thawing\" of PVA/PVP hydrogels, and then irradiating them at 40 kGy. The PVA/PVP ratio was in the range of 30:70 ~ 100:0, and the solid concentration of PVA/PVP was 20 wt%. The gelation and strength of hydrogels were much higher when \"freezing and thawing\" and the irradiation process were used than when only the irradiation process was utilized. In addition, the mechanical properties of PVA/PVP hydrogels after repetition of \"freezing and thawing\" are discussed. thawing\" are discussed.ssed.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.28-33
• /
• 2020

Plasma etching process employs high density plasma to create surface chemistry and physical reactions, by which to remove material. Plasma chamber includes silicon-based materials such as a focus ring and gas distribution plate. Focus ring needs to be replaced after a short period. For this reason, there is a need to find materials resistant to erosion by plasma. The developed chemical vapor deposition processing to produce silicon carbide parts with high purity has also supported its widespread use in the plasma etch process. Silicon carbide maintains mechanical strength at high temperature, it have been use to chamber parts for plasma. Recently, besides the structural aspects of silicon carbide, its electrical conductivity and possibly its enhanced life time under high density plasma with less generation of contamination particles are drawing attention for use in applications such as upper electrode or focus rings, which have been made of silicon for a long time. However, especially for high purity silicon carbide focus ring, which has usually been made by the chemical vapor deposition method, there has been no study about quality improvement. The goal of this study is to reduce surface roughness and depth of damage by diamond tool grit size and tool dressing of diamond tools for precise dimensional assurance of focus rings.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.232-246
• /
• 2007

The purpose of this study is to investigate aesthetic characteristics and aesthetic consciousness of the style that European fashion(Paris, London, Netherlands) has accepted the since $19^{th}$ century. The mode Japonisme's development process in around $20^{th}$ century and 21st century has 6 characteristics as follows; 1. Accepting kimono as dressing gown 2. Accepting kimono as Japanese style's objet of Japanese taste 3. Accepting Japanese textile's skills, patterns, and asymmetry. 4. Accepting kimono's formative nature : flat pattern, flexibility, style etc. 5. Shocking of Japanese style's beauty 6. Accepting characters and casual wear Japanese aesthetic consciousness expressed on unconstructed design or deconstructed design that is the aesthetic characteristic of Japanese fashion is , , and the aesthetic consciousness expressed on Zen(Seon) style, cartoons of character fashion, and costume play is .

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.161-165
• /
• 1993

최근 산업의 발달과 함께 제품의 고정도화,다양화,생산성 향상등의 요구에 의해 연삭가공에 있어서도 고능률.고정도가공이 주목되고 있다. 특히 반도체산업,광산업 등에 넓게 응용되고 있는 광학소자 가공에서는 가공정도와 가공능률이 동시에 달성되는 것에 대한 요구가 많지만, 이러한 광학소자의 가공에 있어서 기존의 연마방법은 가공정도와 가공능률에 한계가 있었다. 그런데 연삭가공에서 고능률,고정도가공의 한가지 방법으로 "전해 인프로세스드레싱(Electrolytic In-Process Dressing;ELID)연삭법"이 개발되어 고강도 메탈본드숫돌에 의한 초경합금,세라믹재료등의 경취성재료를 고품위 가공하고 있다. ELID연석법이란 숫돌의 다이아몬드나 cBN등의 연삭입자를 결합하고 있는 금속결합재를 전기분해에 의해 적당량 제거하여 일반적인 연삭과 같이 연삭입자를 연속적으로 돌출시켜 가공이 유지되도록 하는 연삭방법이다. 본 연구는 ELID연삭기술을 이용하여 원통연삭에서 철갈재료 및 세라믹재료의 고능률.고정도 가공특성을 살펴보았다. 원통연삭에서의 주철파이바본드숫돌 및 코발트본드숫돌에 의한 ELID연삭과 비트리파이드본드숫돌에 의한 일반연삭과의 고능률 가공특성을 비교하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.161-166
• /
• 1997

Application of hot roiling oil lubrication technology was broadened to the field of RM stands of Hot Rolling Mill at Pohang works. The primary object was to improve the quality of the strip sttrface and the rolls by oil lubrication in hot rolling process. Prior to the actual field application preliminary test was conducted to evaluate the effect of hot rolling oil lubrication at RM stands. From the test, it has been found that the use of oil lubrication tends to prevent the progression of the heat cracks and thereby increases the quality of the strip surface and the wear life of the rolls. New hot rolling oil lubrication system was applied to the RM stands VSB, R1, R2, R3, R4 and edger rolls. With the introduction of a rolling lubricant, the quality of the strip surface and rolls was improved and overall roll dressing has decreased. Also there has been a improvement of productivity from the long roll life.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.87-92
• /
• 2018

As gas turbines for power generation become increasingly more important for high capacity and high efficiency, the technological development and investment of companies are increasing globally. Gas turbine manufacturing technology is only owned by a few companies such as GE, Siemens, and MHI, and our country currently depends on imports of processing technology and component parts. The core part of the gas turbine is curvic coupling tooth processing technology that improves turbine efficiency by smoothly transmitting power to the turbine rotor. Curvic coupling tooth machining and evaluation research is restricted overseas, and it is not underway in Korea. Therefore, in this study, roughing and finishing process technology for curvic coupling tooth machining is developed and a quantitative evaluation method is proposed. For the development of machining technology, the analysis of critical parameters was performed through C & E analysis. In the roughing process, the conditions considering the minimum machining time and tool load ratio were determined. Finishing process conditions were determined based on the contact ratio between the tooth surfaces. The image-processing method is presented for evaluation of the contact ratio and a verification test was performed.

• Microbiology and Biotechnology Letters
• /
• v.38 no.4
• /
• pp.420-427
• /
• 2010

A process for manufacturing virally-safe bovine amniotic membrane(BAM) has been developed for biological dressing. BAM was harvested from a healthy bovine placenta, and then the epithelium was removed. The remaining stromal layer was consecutively disinfected with 70% ethanol and 0.05% sodium hypochlorite. The stromal layer was incubated in a decellularization solution containing 0.25%(w/v) trypsin to remove the cellular components. The resulting acelluar BAM was lyophilized to preserve its biochemical and structural integrity. The BAM was packed and exposed to 25 kGy of gamma irradiation for sterilization purpose. Histological, electron microscopical, and biochemical observations showed that the acellualr BAM had intact structural integrity of three dimensional collagen fibers and contained several growth factors, accelerating wound healing, such as EGF (Epidermal growth factor), KGF (Keratinocyte growth factor), and FGF (Fibroblast growth factor). Bovine herpes virus (BHV), bovine viral diarrhoea virus (BVDV), bovine parainfluenza virus type 3 (BPIV-3), and bovine parvovirus (BPV) were chosen as the biological indicators for validation of viral safety of the acellular BAM. Samples from relevant stages of the production process were spiked with each virus and subjected to viral inactivation processes. Viruses were recovered from the samples and then titrated immediately. All the viruses tested were completely inactivated to undetectable levels within 1 h of 70% ethanol treatment. Enveloped viruses such as BHV, BVDV, and BPIV-3 were more effectively inactivated than BPV by 0.05% sodium hypochlorite treatment. BHV, BVDV, and BPIV-3 were completely inactivated to undetectable levels by 25 kGy of gamma irradiation. Also BPV was effectively inactivated by 25 kGy of gamma irradiation. The cumulative log reduction factors of BHV, BVDV, BPIV-3, and BPV were ${\geq}$13.30, ${\geq}$14.32, ${\geq}$15.22, and ${\geq}$7.57, respectively. These results indicate that the production process for acelluar BAM has a sufficient virus-reducing capacity to achieve a high margin of the virus safety.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.75-80
• /
• 2013

Single crystal sapphire being used in high technology industry is a brittle material with a high hardness and excellent physical properties. ELID(Electrolytic In-Process Dressing) grinding technology was applied to material removal machining process of single crystal sapphire wafer. Ultrasonic vibration which added to material using ultrasonic table was adopted to efficient ELID grinding of sapphire materials. The evaluation of the ground surface of single crystal sapphire wafer was carried out by means of surface measuring by using AFM(Atomic Force Microscope), surface roughness tester and optical microscope device. As the results of experiment, it was shown that more efficient grinding was conducted when using ultrasonic table. In case of using #170 grinding wheel, surface roughness of ELID ground specimen in using ultrasonic table was superior to ELID ground specimen without ultrasonic table. However, In case of using #2000 grinding wheel, surface roughness of ELID ground specimen in using ultrasonic table was inferior to ELID ground specimen without ultrasonic table.