DOI QR코드

DOI QR Code

A Study on the Selection of Grinding Conditions and Evaluation for Curvic Coupling Tooth Machining

Curvic Coupling Tooth 가공의 연삭 조건 선정 및 가공면 평가에 관한 연구

  • Hur, Du-Kwon (Department of Mechanical Engineering, Changwon national univ.) ;
  • Kim, Myung-Hyun (Department of Mechanical Engineering, Changwon national univ.) ;
  • Kim, Chan Kyu (Department of Mechanical Engineering, Changwon national univ.) ;
  • Jeong, Young Cheol (Department of Mechanical Engineering, Changwon national univ.) ;
  • Jung, Yoon Gyo (Department of Mechanical Engineering, Changwon national univ.) ;
  • Cho, Young Tae (Department of Mechanical Engineering, Changwon national univ.)
  • Received : 2018.02.06
  • Accepted : 2018.05.10
  • Published : 2018.06.30

Abstract

As gas turbines for power generation become increasingly more important for high capacity and high efficiency, the technological development and investment of companies are increasing globally. Gas turbine manufacturing technology is only owned by a few companies such as GE, Siemens, and MHI, and our country currently depends on imports of processing technology and component parts. The core part of the gas turbine is curvic coupling tooth processing technology that improves turbine efficiency by smoothly transmitting power to the turbine rotor. Curvic coupling tooth machining and evaluation research is restricted overseas, and it is not underway in Korea. Therefore, in this study, roughing and finishing process technology for curvic coupling tooth machining is developed and a quantitative evaluation method is proposed. For the development of machining technology, the analysis of critical parameters was performed through C & E analysis. In the roughing process, the conditions considering the minimum machining time and tool load ratio were determined. Finishing process conditions were determined based on the contact ratio between the tooth surfaces. The image-processing method is presented for evaluation of the contact ratio and a verification test was performed.

Keywords

References

  1. Pisani, S. R. and Rencis, J. J., "Investigating CURVIC coupling behavior by utilizing two-and-three-dimensional boundary and finite element methods," Engineering Analysis with Boundary Elements, Vol. 24, No. 3, pp. 271-275, 2000. https://doi.org/10.1016/S0955-7997(99)00057-0
  2. Jiang, X., Zhu, Y., Hong, J., Chen, X. and Zhan, Y., "Investigation into the loosening mechanism of bolt in curvic coupling subjected to transverse loaing," Engineering Faulure Analysis, Vol. 32, pp. 360-373, 2013. https://doi.org/10.1016/j.engfailanal.2013.04.005
  3. Huang, K., Xiong, Y., Wang, T. and Chen, Q., "Reseach on the dynamic response of high-contact-ratio spur gears influenced by surface roughness under EHL condition," Applied Surface Science, Vol. 392, pp. 8-18, 2017. https://doi.org/10.1016/j.apsusc.2016.09.009
  4. Lee, G. I. and Kim, J. Y., "Evaluation of Reliability of Large Hybrid Curvic Gear Using Thermography," Journal of the Korean Society of Manufacturing Process Engineers, Vol.16. No.3, pp. 146-152, 2017.
  5. Tsai, Y. C. and Hsu, W. Y., "A Study on the CAD/CAM of Curvic Couplings," ASME Turbo Expo 2002 : Power for Land, Sea, and Air, Vol. 3, pp. 1157-1162, 2002.
  6. Park, D. K., Lee, C. M. and Kim, J. W., "Development of Manufacturing Process for a Curvic Coupling of Machine Tools and Inspection Device," Journal of Korean Society for Precision Engineering, Vol. 25. No. 5, pp. 28-33, 2008.
  7. Kim, C. S., Jeong, H. H., Lee, D. H., Lee, D. H. and Choi, H. O., "A study of Structure Analysis modeling of Curvic Coupling by Experiment and Theory," Proceedings of KSPE 2008 Spring Conference, pp. 823-824. 2008.
  8. Choi, J. H., Kim, C. S. and Cho, S. Y., "A Study on the Relationship between the Cutting Force and the Critical Ejecting Distance of Disk for a Mill Turret," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 1, pp. 110-116, 2013.
  9. Lee, H. J., Kang, N. S., Jeon, Y. G., Kim, K. H., Kim, H. G. and Kim, J. Y., "A Case Study of Six Sigma Project for Improving Measurement Method of Skin Elasticity," Korean Journal of Oriental Medicine, Vol. 16. No3, pp. 135-140, 2010.
  10. Lee, J. H., Song, H. W. and Kim, J. Y., "A Study on Quality Control and Measurement for Acquisition of Dynamic Friction Coefficient on Back-hand Skin," Korean Journal of Oriental Medicine, Vol. 14. No. 3, pp. 103-111, 2008.
  11. An, I. H., Hur, N. S., Lee, I. B. and Lyu, S. K., "A Study on Effect of the Grinding in SCM420H Planetary Gear," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11. No. 5, pp. 54-59, 2012.
  12. Kim, L. S., Kim, J. M., Choi, C., Liang, L. J. and Lyu, S. K., "Study on the Teeth Grinding Condition of SCM415H Gears," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14. No. 2, pp. 19-24, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.019