• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.597-602
• /
• 2005

The present precast top-base method create many problems of requiring it plant facilities, transportation and installation, due to the heavy weight of and it takes too long time to set it up on site. In order to improve and solve these problems, in-situ Top-Base method is developed. It include processes that install Top-Base mold made of poly-ethylene into ground, then pouring concrete into the mold, and fill the rest gaps with broken stones. Considerable advantages can be obtained by applying in-situ Top-Base method in aspects of the stability, economical and construction efficiency. In this research, model tests for in-situ Top-Base system are carried out in other to the investigate the load delivering mechanism and the effect of bearing capacity.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.697-703
• /
• 2006

본 논문에서는 국내. 외에서 처음으로 시도되는 현장타설 팽이기초공법의 거동특성을 검토하기 위하여 기초형식을 현장타설 팽이기초(In-Situ TBF), 공장제작 콘크리트 팽이기초(PC-TBF) 전면기초, 무처리 원지반으로 나누어 모형토조실험을 수행하였다. 모형실험결과 현장타설 팽이기초와 공장제작 콘크리트 팽이기초의 거동특성은 거의 유사하게 나타났으며, 이들 팽이기초는 원지반 및 전면기초에 비하여 지지력 증대효과가 있는 것으로 나타났다. 또한, 기초 형식에 따른 지중연직응력 분포를 검토한 결과 팽이기초 설치시 지중연직응력의 영향범위가 감소하는 것을 확인할 수 있었다. 한편, 지반이 조밀할수록 팽이기초의 응력분산효과가 감소하는 것을 알 수 있었으며, 향후 다양한 지반조건에서 모형실험과 수치해석을 통해 보다 많은 검토가 수행되어야 할 것으로 판단된다.

• 한국지반신소재학회논문집
• /
• 제10권1호
• /
• pp.1-8
• /
• 2011

연약지반상에 구조물을 축조하게 되면 지반의 지지력 부족, 과대침하량 및 측방변형과 같은 문제점이 발생한다. 팽이말뚝기초공법은 지지력이 다소 부족한 지반에 팽이형 콘크리트 파일을 연약지반기초에 사용하여 지지력 증가와 침하억제, 부등침하방지 등의 효과를 도모하는 연약지반 표면 처리용 강성매트공법이며, 공사비 절감 등의 경제적인 효과와 공사기간 단축, 공사 중 소음 등으로 인한 민원 차단 등의 시공에 따른 편의성을 확보할 수 있다. 따라서 본 연구에서는 현장평판재하시험을 통하여 연약지반상의 현장타설형 팽이말뚝기초의 지지력을 산출하였다. 평판재하시험 분석결과를 통해 기존 연구 및 설계에서 적용하고 있는 제안식과 비교분석하여 현장타설형 팽이말뚝기초를 기초지반에 적용할 시 기초의 합리적인 범위를 산정하여 향후의 설계에 그 결과를 활용하고자 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.210-221
• /
• 2009

A new foundation type which is called Top-Base method has been used frequently in engineering practices in Korea. In this study, the settlement behavior of concrete Top-Base foundation on soft ground is investigated since the consolidation settlement of the embedding depth and the effect of footing dimensions are not included in current Korean criterion (2007). To obtain detailed information, the model tests of the Top-Base foundation are performed using the PLAXIS 3D finite element analysis. It is shown that in-situ measurements and finite element analysis of the behavior of foundations indicate that consolidation settlement is reduced up and bearing capacity of the foundation increases up to 50%~100%, compared to the primary non-treated ground. Based on this study, it is found that the Top-Base foundation prevents the lateral deformation of soft ground and reduces its negative dilatancy to the surface settlement, and that the foundation creates rather uniform stress distribution under it to increase its bearing capacity. It is also found that the total settlement of Top-Base foundation was highly dependent on the consolidation settlement and footing configurations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.748-753
• /
• 2008

Bi-directional load test is one of O-cell tests. The O-cell test is a system which may be used for performing static load tests on cast in situ reinforced concrete bored piles. The technique was devised and developed by Osterberg of Northwestern University(USA) and has been in use around the world. The principle of the method is that an O-cell is installed in a cast in situ bored pile base. Once the pile concrete reaches its design strength the cell is connected to an hydraulic pump and pressured. Pressurisation causes the cell to expand, developing an upward force on the section of pile above the cell loads, pile movements and strains within the pile then enable the capacity of the pile and its load settlement curves to be ascertained. Bi-directional load tests using O-cell are now becoming common practice around the world, particularly where the loads to be applied are high or where it is not convenient to perform top-down loading tests. In the study, calculate ultimate capacity of bi-directional load test using FEM and beam on elasto-plastic foundation theory.