• 치과방사선
• /
• 제16권1호
• /
• pp.59-68
• /
• 1986

The purpose of this investigation was to locate the central plane of the image layer on the panoramic machine relative to a specific point on the machine. In the study of the central plane of the image layer of panoramic radiograph, using the Morrita Company PANEX-EC a series of 33 exposures were taken with the 4-5 experimental pins placed in the holes of the plastic model plate, then evaluated by human eye. The author analyzed the central plane of the image layer by Mitutoyo-A-221 and calculated horizontal and vertical magnification ratio in the central plane of the image layer determined experimentally. The results were as follows: 1. The location of the central plane of the image layer determined experimentally was to lateral, compared with manufactural central plane. 2. Horizontal magnification ratio in the central plane of the image layer determined experimentally was 9.25%. 3. Vertical magnification ratio in the central plane of the image layer determined experimentally was 9.17%.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.97-104
• /
• 2007

Vibration analysis of a rigid body supported by in-parallel linear springs can be greatly simplified by utilizing the conditions for a plane of symmetry. The vibration modes of an oscillatory system having plane of symmetry are classified into the in-plane and out-of-plane modes. From the viewpoint of screw theory, they represent respectively the vibration axes perpendicular to the plane of symmetry and lying in the plane of symmetry. In this paper, the sets of orthogonal and mutually intersecting three springs are used as resilient support of a rigid body. The geometrical conditions for the system to have a plane of symmetry and diagonalized stiffness matrix are presented. From the orthogonality of the vibration modes with respect to the inertia matrix, the geometrical relation between the reaction wrenches and the vibration modes are derived. This geometrical relation is then used to get the cubic design equation for the design of out-of-plane modes. The numerical design example of engine mounts is presented in order to explain the suggested design technique.

• 대한물리의학회지
• /
• 제8권1호
• /
• pp.41-48
• /
• 2013

PURPOSE: This study was to determine the effect of the plane of movement (sagittal plane vs. scapular plane) and shoulder flexion angle ($90^{\circ}$ vs. $130^{circ}$) during scapular protraction exercises in healthy subjects by investigating the elecromyographic (EMG) activities of the serratus anterior (SA), upper trapezius (UT), and pectoralis major (PM). METHODS: Twenty-one healthy subjects participated in this study. Subjects performed maximal scapular protraction at the $90^{\circ}$ or $130^{\circ}$ shoulder flexion angles in the sagittal or scapular planes. Surface EMG was recorded from the SA and UT, and PM muscles. Dependent variables were examined by 2 (plane) ${\times}$ 2 (angle) repeated measures of analysis of variance (ANOVA). RESULTS: Significantly increased EMG activities in the SA and UT were found during scapular protraction exercise at the $130^{\circ}$ shoulder flexion angle in the sagittal and scapular plane. Also, EMG activity of the PM significantly decreased at the $130^{\circ}$ shoulder flexion angle in the sagittal plane and the $90^{\circ}$ and $130^{\circ}$ shoulder flexion in the scapular plane. CONCLUSION: we recommend scapular protraction exercise at the $90^{\circ}$ shoulder flexion in the sagittal plane to selectively strengthen the SA muscle with limitation of upper trapezius activity and at the $130^{\circ}$ shoulder flexion in the scapular plane to selectively strengthen the SA muscle with limitation of pectoralis major activity.

• 한국전자파학회논문지
• /
• 제13권9호
• /
• pp.956-963
• /
• 2002

본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 compact한 slit-folded형 마이크로스트립패치 안테나를 제작하였다 기존의 길이 방향의 $\lambda_{g}/2$ 공진을 이용한 평면형 마이크로스트립패치 안테나를 길이방향 중심에서 반으로 접어서 마이크로스트립 급전선으로 급전하여 전방향성 방사패턴을 얻은 Folded형 마이크로스트립 안테나를 적층형으로 제작시 급전선의 영향을 줄이기 위하여 급전방법을 상하면 패치사이의 접지면 위에 설계하여 급전핀을 세웠다. 또한 평면형 H형 SIR 구조를 Folded형 안테나에 적용한 슬릿 folded형 안테나는 기존의 folded형 안테나에 비하여 27.5 % 더 소형화하였다. 기존의 folded형 마이크로스트립 안테나는 E면(zx-plane)과 H면(xy-plane)의 평균이득이 거의 1.8 dB 정도의 차이를 보였으나 본 논문에서 제안한 슬릿 folded형은 E & H-plane의 평균이득차이가 0.1 dB로 거의 같음을 알 수 있다.

• Journal of applied mathematics & informatics
• /
• 제31권1_2호
• /
• pp.79-86
• /
• 2013

Taxicab plane geometry and Cinese-Checker plane geometry are non-Euclidean and more practical notion than Euclidean geometry in the real world. The ${\alpha}$-distance is a generalization of the Taxicab distance and Chinese-Checker distance. It was first introduced by Songlin Tian in 2005, and generalized to n-dimensional space by Ozcan Gelisgen in 2006. In this paper, we studied the isoperimetric inequality in ${\alpha}$-plane.

• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.53-65
• /
• 2022

Objective: Planning of incisal position is crucial for optimal orthodontic treatment outcomes due to its consequences on facial esthetics and occlusion. A systematic summary of the proposed parameters is presented. Methods: Studies on Google Scholar^©, PubMed^©, and Cochrane Library, providing quantitative information on optimal central incisor position were included. Results: Upper incisors supero-inferior position (4-5 mm to upper lip, 67-73 mm to axial plane through pupils), antero-posterior position (3-4 mm to Nasion-A, 3-6 mm to A-Pogonion, 9-12 mm to true vertical line, 5 mm to A-projection, 9-10 mm to coronal plane through pupils), bucco-lingual angulation (4-7° to occlusal plane perpendicular on models, 20-22° to Nasion-A, 57-58° to upper occlusal plane, 16-20° to coronal plane through pupils, 108-110° to anterior-posterior nasal spine), mesio-distal angulation (5° to occlusal plane perpendicular on models). Lower incisors supero-inferior position (41-48 mm to soft-tissue mandibular plane), antero-posterior position (3-4 mm to Nasion-B, 1-3 mm to A-Pogonion, 12-15 mm to true vertical line, 6-8 mm to coronal plane through pupils), bucco-lingual angulation (1-4° to occlusal plane perpendicular on models, 87-94° to mandibular plane, 68° to Frankfurt plane, 22-25° to Nasion-B, 105° to occlusal plane, 64° to lower occlusal plane, 21° to A-Pogonion), mesio-distal angulation (2° to occlusal plane perpendicular on models). Conclusions: Although these findings can provide clinical guideline, they derive from heterogeneous studies in terms of subject characteristics and reference methods. Therefore, the optimal incisal position remains debatable.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.865-875
• /
• 1998

교정이나 악교정 수술 환자에서 치료계획 수립과 치료결과의 평가를 위해서 지금까지 많은 수평기준선이 사용되고 있으나 정확성과 재현성 등의 문제가 존재하고 있으며, 더욱 객관적인 수평기준선이 설정 될 수 있다면 교정학 분야에서 많은 발전이 기대될 수 있을 것이다. 이에 본 연구에서는 한국 성인의 부정교합군과 성별에 따른 Sella-Nasion(SN) 평면과 Frankfort-Horizontal(FH) 평면이 이루는 각도 및 FH평면과 다른 수평면 간의 상관 관계를 조사하기 위하여 먼저 임상검사를 시행하여 총 600 여명을 대상으로 측모두부규격 방사선사진을 촬영하였다. 계측결과를 바탕으로 연구대상을 골격성 I급 부정교합군 또는 정상교합군(남 50, 여 50), 골격성 II급 부정교합군(남 50, 여 65), 골격성 III급 부정교합군(남 50, 여50)으로 분류한 후 10개의 항목을 평가하여 다음과 같은 결론을 얻었다. 1. SN평면과 FH평면이 이루는 각도는 부정교합에 따른 차이는 없었으나 성별 간에는 세 부정교합군 모두에서 차이를 보여 남자는 $7.47{\pm}2.40^{\circ}$, 여자는 $8.93{\pm}2.72^{\circ}$ 였다. 2. SN 평면 또는 FH 평면과 Mandibular Plane이 이루는 각은 모든 부정교합군에서 여자가 남자보다 컸으며, 골격성 II급 부정교합군과 III급 부정교합군이 I급 부정교합군보다 큰 각도를 나타내었다. 3. FH평면과 Palatal Plane이 이루는 각은 부정교합군 및 성별에 따른 차이를 보이지 않고 비교적 일정하였다. 4. Gonial angle은 남녀 모두 III급 부정교합군이 다른 두 부정교합군보다 큰 각도를 보였다.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.101-106
• /
• 2004

Measurements of linear motion accuracy for one axis of NC lathe have achieved with laser interferometer system, but measurement of plane motion accuracy for two axes on zx-plane of NC lathe have not achieved with the above system. Therefore in this study, measuring unit system is organized using two optical linear scales in order to acquire error. data during of plane motion of ATC(Automatic Tool Change.) of NC lathe by reading zx-plane coordinates. Two optical linear scales of measuring unit are fixed on zx-plane of NC lathe, and moving part of the scales are fixed to the ATC and then error motion data of z, x-coordinates of the ATC are received from the scales through the PC counter card inserted in computer at constant time intervals using tick pulses coming out from computer. And then, error motion data files acquired from measuring are saved in computer memory and the aspect of plane motion are modeled to plots, and range of the error data, means. average deviations, and standard deviations etc. are calculated by means of statistical treatments using computer programs.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.333-354
• /
• 1990

This study was designed to analyse vertical dysplasia such as open bite or deep bite in persons with skeletal Class III malocclusion. The subjects consisted of 60 control patients, 40 Class III open bite patients and 40 Class III deep bite patients. The mean age was 19.8 years in the control group, 17.8 years in the Class III open bite group and 16.5 years in the Class III deep bite group. The results were as follows: 1. In Class III malocclusion patients, the characteristics of the vertical dysplasia are under the palatal plane. 2. In Class III malocclusion patients, the items showing the characteristics of the vertical dysplasia are mandibular plane angle, lower gonial angle, lower facial height, dental height & inclination of the upper first molar, interincisal angle, maxillary & mandibular occlusal plane angle. 3. In Class III malocclusion patients, LPFH/LAFH ratio shows the highest significance among the facial height ratios. 4. In Class III malocclusion patients, open bite group has a upward cant of maxillary occlusal plane & downward cant of mandibular occlusal plane. And deep bite group has a downward cant of maxillary occlusal plane & upward cant of mandibular occlusal plane. 5. In Class III malocclusion patients, the molar teeth of the open bite group are measially inclined and those of the deep bite group are upright.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.894-899
• /
• 2000

An automatic mesh generation system with unstructured quadrilateral elements on trimmed NURBS surfaces has been developed.. In this paper, NURBS surface geometries in the IGES format have been used to represent model shape. NURBS surface is represented as parametric surface. So each surface could be mapped to a 2D parametric plane through the parametric domain. And then meshes with quadrilateral elements are constructed in this plane. Finally, the constructed meshes are mapped back to the original 3D surface through the parametric domain. In this paper, projection plane, quasi-expanded plane and parametric Plane are used as 2D mesh generation plane. For mapping 3D surface to parametric domain, Newton-Rhapson Method is employed. For unstructured mesh generation with quadrilateral elements on 2D plane, a domain decomposition algorithm using loop operators has been employed. Sample meshes are represented to demonstrate the effectiveness of the proposed algorithm.