• Advances in materials Research
• /
• v.2 no.4
• /
• pp.209-219
• /
• 2013

We have described primary studies on conductivity and molecular weight of polyaniline separately in the electric and magnetic fields when it is used in a field effect experimental configuration. We report further studies on doped in-situ deposited polyaniline. First we have chemically synthesized polyaniline by ammonium peroxodisulfate in acidic aques and organic solutions at different times. Then we measured mass and conductivity and obtained the best time of polymerizations. In continue, we repeated these reactions separately under different electric and magnetic fields in constant time and measured mass and conductivity. The polyaniline is characterized by gel permeation chromatography (GPC), UV-Visible spectroscopy and electrical conductivity. High molecular weight polyanilines are synthesized under electric field, $M_w$ = 520000-680000 g/mol, with $M_w/M_n$ = 2-2.5. The UV-Visible spectra of polyanilines oxidized by ammonium peroxodisulfate and protonated with dodecylbenzenesulfonic acid (PANi-DBSA), in N-methylpyrolidone (NMP), show a smeared polaron peak shifted into the visible. Electrical conductivity of polyanilines has been studied by four-probe method. The conductivity of the films of emeraldine protonated by DBSA cast from NMP are higher than 500 and 25 S/cm under 10 KV/m of potential) electric field and 0.1 T magnetic field, respectively. It shows an enhanced resistance to ageing too. By the next steps, we carried chemical polymerization at the best electric and magnetic fields at different times. Finally, resulted in finding the best time and amount of the fields. The longer polymerization time and the higher magnetic field can lead to degradation of polyaniline films and decrease conductivity and molecular mass.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.301-305
• /
• 2011

ABS/silicate composites with different clay types and compositions were prepared by in situ emulsion polymerization. The chemical structure of ABS was confirmed by the change of C-H stretching peak(near 3000 $cm^{-1}$) in fourier transform-infrared(FT-IR) spectrum. The thermal properties of the ABS/silicate composites were investigated by differential scanning calorimetry(DSC) and thermogravimetric analyzer(TGA). There was no distinct change in glass transition temperature of the ABS/silicate composites with different clay types. TGA curve indicates a dramatic increase in degradation temperature in case of ABS/20A composite with 3 wt% 20A. The silicate dispersion in the composites was measured by X-ray diffraction(XRD). The silicate dispersion in ABS/20A composites depended on the 20A composition. XRD results showed that the diffraction peak of the ABS/20A composite appeared when the content of 20A was higher than 5 wt%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.4
• /
• pp.464-469
• /
• 2000

Experiments were conducted to determine the effects of soybean meal (SBM) as a source of protein and sago meal (SM) as a source of carbohydrate on in situ and in vivo digestibility of dietary components in four male goats (Kambing Katjang) and four male sheep (Malin) weighing 25-35 kg. Rumen volume, as well as rumen fluid dilution rate were also determined. The animals were housed in single pens with individual feeding and drinking troughs and each animal was fitted with a rumen fistula. They were fed two diets : chopped rice straw+200 g soybean meal (SBM), and chopped rice straw+190 g soybean meal+300 g sago meal (SBM+SM). Rice straw was offered ad libitum. The supplements were isonitrogenous (80 g crude protein/animal/d), but the proportions of dry matter (DM), organic matter (OM), crude fibre (CF), neutral detergent fibre (NDF) and acid detergent fibre (ADF) were lower in the SBM supplement (191, 165, 11, 40, 15 g/animal/d for DM, OM, CF, NDF and ADF, respectively) than in the SBM+SM supplement (445, 423, 25, 102, 38 g/animal/d for DM, OM, CF, NDF and ADF, respectively). Two animals from each species were fed either supplement in a cross-over design in two periods. Each period lasted for four weeks. In situ and in vivo digestibility studies were carried out, followed by the determination of rumen volume and rumen fluid dilution rate. The results showed that straw DM and total DM intakes of goats (average of $48.7g/kg\;W^{0.75}$, $72.7g/kg\;W^{0.75}$, respectively) were significantly (p<0.01) higher than sheep (average of $3.56g/kg\;W^{0.75}$, $61.6g/kg\;W^{0.75}$, respectively), but OM, N and GE intakes were not significantly different between the two animal species. When the effect of supplements was compared, animals fed SBM+SM supplement had significantly (p<0.001) higher DM, OM and GE intakes than animals fed SBM supplement. Potential degradabilities of rice straw DM were significantly (p<0.01) higher in goats (average of 48.8%) than in sheep (average of 46.1 %). The supplements had no significant effect on the potential degradabilities of DM, OM and NDF, but they had a significant (p<0.05) effect on the degradation rates of DM and NDF. The addition of sago meal in the diet reduced the degradation rates of DM and NDF of rice straw in the rumen. Potential degradability of DM of soybean meal was not significantly different between animal species as well as between supplements. Sago meal was highly degradable. At 24 h of incubation in the rumen, 90-95% of DM loss was observed. There was a significant interaction between animal species and supplements in the in vivo digestibility of ADF and GE. In animals fed SBM supplement, the in vivo digestibility of ADF was significantly (p<0.05) higher in goats ($50.6{\pm}4.22%$) than in sheep ($44.4{\pm}3.21%$), but digestibility of GE was significantly (p<0.05) higher in sheep ($70.2{\pm}1.93%$) than in goats ($63.0{\pm}3.07%$). The digestibility values of CP and OM were significantly (p<0.05) higher in sheep when compared to goats. Animals fed SBM+SM supplement showed significantly (p<0.05) higher DM and OM digestibility values than animals fed SBM supplement, but digestibility values of CP were significantly (p<0.05) higher in animals fed SBM supplement. Differences in in vivo digestibility values of CF and NDF were not significantly different between animal species or supplements. Water intake, rumen volume ($1/kg\;W^{0.75}$), rumen fluid dilution rate and mean retention time were similar between the two animal species. However, rumen fluid dilution rate and mean retention time was significantly (p<0.01) affected by supplements. Animals fed SBM+SM had faster rumen fluid dilution rate and consequently shorter mean retention time.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.1
• /
• pp.7-14
• /
• 2001

The amount of petroleum consumption has been Increased according to the industrialization and It leads to the increase of the possibility of marine oil pollution. In Korea, some countermeasures including oil skimmer, gelling agent and herding agent of oil have been used for the remediation of the pollution. However, most of them have lets of shortcomings in the application under in-situ condition, because they are sensitive to the situation such as geographical feature, the wind and the tide. In reported literature, the natural powdered oil absorbent which is made of peat moss is an effective mean to clean spilled oil from lake or coast. However, the peat moss is a natural resource which is only Produced from a specific cold weather are like Canada. This indicates that the alternative materials which is readily obtained from everywhere are needed for powdered oil absorbent. Therefore. in the study, same natural materials including pine leaves and straw are tested as the alternative materials for the absorbent. The raw materials were dried and treated by heat at various temperature during several Periods and then. shattered by a grain cracking machine. The oil sorption capacity of the prepared materials was compared according to the methods of heat treatment and their sizes. The proportion of hydrogen cyanide to combustion of the absorbents was measured to confirm their final disposal methods. The biodegradability test of the absorbents was carried our to evaluate possibility of a side pollution in the coast. In was found that the heat treatment of pine leaves enhanced the capacity of oil sorption and decreased the water sorption. The maximum oil sorption was observed for the material treated at 18$0^{\circ}C$for 60 min. The amount of hydrogen cyanide from the combustion were 0.09ml/g, 0.07ml/g for pine leaves and straw respectively meaning that the final disposal by combustion might be feasible. The amount or organic carbon extracted from pine leaves during 7 days was up to 0.015g organic carbon from one gram of pine leaves. but the degradation was as fast as for glucose. It is concluded that the pine leaves can be served as a good raw material for the powdered oil absorbent like peat moss.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.598-605
• /
• 1995

Thin films of $YB_{2}Cu_{3}O_{7-d}$ were prepared on various substrated of MgO(100), $SrTiO_{3}$, and $LaAlO_{3}$ by using off-axis magentron sputtering methods and annealing in-situ. The prarameters of film fabrication processes had been optimized through a "follow the lcoal maxima" strategy to yield good quality films in therms of the critical temperature $T_{c}$ and the critical current density $J_{c}$. Optimizedproecsses employing a plane magndtron and an cylindrical magnetron yielded $T_{c}$>90K along with $J_{c}$$10^{6}$A/$\textrm{cm}^2$ at 77K and > 2${\times}$$10^{7}$A/$\textrm{cm}^2$ at 5K. The sampels, however, showed degradationinthe properties, after chemical etching for fabrication of microbridges with the line width of 2-10 mocrons. In particular, the value of $T_{c}$ for the microbridges of 2microns was as small as 80%. The degradation was strongly dependent on the line width through a formula : $T_{c}$(e)=$T_{c}$)b) [1-a exp(-1000 bL)} where $T_{c}$(e) and $T_{c}$ (b) are the values of $T_{c}$ in the absolute scale measured after and before chemical etching, respectively and L is the line width in mm. By utilizing a best fitting technique, the proper constant values of a and to b were found as exp(-1.2) and 0.22, respectively. This formula was very useful in estimatiing the upper limit of the device operationtemperature.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.215-219
• /
• 2012

An attempt was made to evaluate creep reliability of two commercial Ni-based superalloys by using ultrasonic wave. The materials include fine-grained PM alloy fabricated by mechanical alloying and subsequent hot isostatic pressing, and IN738LC cast alloy with a grain size of a few cm. Microstructural parameters (fraction of creep cavity and size of ${\gamma}^{\prime}$ precipitates) and ultrasonic parameters (velocity, attenuation) were measured to try to find relationships between them. Ultrasonic velocity decreased with creep cavity formation in PM alloy. On the other hand, no distinct changing trend of ultrasonic velocity was observed for IN738LC alloy. Ultrasonic attenuation was found to have a linear correlation with the size of ${\gamma}^{\prime}$ precipitates and was suggested as a potential parameter for monitoring creep reliability of IN738LC alloy.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.441-450
• /
• 2016

A pilot scale biostimulation experiment was performed under field conditions to degrade organic pollutants and PAHs (Polycyclic Aromatic Compounds) in contaminated coastal sediment. During the experiment, the seawater temperature around the sediment varied from $16.5^{\circ}C$ to $21^{\circ}C$, while the sediment pH was stable at 8.4-8.5. The experiment was conducted over a one year period with a control group and a sample group with a applied biostimulant composed of acetate, sulfate, and nitrate. Chemical oxygen demand decreased 39% in the control group and 79% in the sample group. Volatile solids were reduced from 15 to 7 g/kg in the control group and 2.5 g/kg in the sample group. Out of the 2-, 3- ,4- ,5-, and 6-rings of the 16 vital PAHs, the compound including naphthalene (2-ring), took 2 months to degrade completely, while the degradation efficiency was 55.6% in the control group during the same period. In the case of the 3-ring and 4-ring PAHs, complete degradation in the sample and 46% - 100% degradation in control was observed after one year of the experiment. The 5-ring and 6-ring PAHs were degraded to about 77%-100% in the sample group and 26%-87% in the control group during the one year of the experiment. The study results show that biostimulation is a very effective method to improve the degradation rate of organic pollutants and PAHs (Polycyclic Aromatic Compounds) in contaminated coastal sediment.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.3
• /
• pp.59-65
• /
• 2006

Reductive dechlorination of chlorophenols by nickel coated iron was investigated to understand the feasibility of using Ni/Fe for the in situ remediation of contaminated groundwater. Zero valent iron (ZVI) was amended with Ni(II) ions to form bimetal (Ni/Fe). Dechlorination of 4-chlorophenol and formation of intermediates was studied using Ni/Fe. Effects of initial contaminant concentration, bimetal loading, presence of humic acid, and solution chemistry were also evaluated. Experimental results showed that Ni/Fe bimetal was so effective that more than 95% of 4-CP degradation was achieved within 240 minutes. Pseudo first-order rate constant for the dechlorination reaction was well correlated with bimetal loading. Humic acid competed for the reactive sites on the nickel coated iron with chlorophenols, lowering the dechlorination efficiency. No significant changes in solution pH were observed in the dechlorination of chlorophenols with Ni/Fe in the absence of buffer, indicating that reactivity of bimetal (Ni/Fe) could be prolonged. Phenol was found as a dechlorination intermediate of the conversion of 4-chlorophenol compound by Ni/Fe.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.887-893
• /
• 2007

Influences of forage DM and addition of cane molasses on silage characteristics of berseem (Trifolium alexandrium) and lucerne (Medicago sativa) and their ruminal digestion kinetics in Nili buffaloes were studied. Berseem and lucerne fodders (at one tenth bloom) were ensiled with wheat straw in laboratory silos to achieve 20, 30, 40% forage DM and without wheat straw (control); each forage DM level was supplemented with 2, 4 and 6% of cane molasses at ensiling. The pH and lactic acid contents of berseem and lucerne silages were affected by both forage DM and addition of molasses. Dry matter, CP and true protein (TP) of berseem and lucerne silages were affected by forage DM at ensiling but were not affected by the addition of cane molasses. Higher DM, CP and TP losses were observed when berseem and lucerne fodders were ensiled either without wheat straw or with wheat straw to achieve 20% and 40% forage DM at ensiling compared with 30% DM at ensiling. Fiber fractions (NDF, ADF, hemicellulose and cellulose) of berseem silage and lucerne silage were significantly increased with increasing forage DM at ensiling. Addition of cane molasses did not affect the DM, CP, TP and fiber fractions of both berseem and lucerne silages. Berseem and lucerne ensiled at 30% DM with 2% cane molasses were screened for comparative ruminal digestion kinetics with their respective fodders. Addition of wheat straw to berseem or lucerne fodder at ensiling depressed DM and NDF ruminal degradability. However, ruminal lag time, rate of degradation and extent of digestion of silages were similar to their respective fodders. In conclusion, berseem and lucerne could be ensiled with wheat straw to increase their DM to 30% along with 2% molasses for buffaloes.

• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.727-740
• /
• 2008

A down hole vertical seismic array is a sequence of instruments installed at various depths in the earth to record the ground motion at multiple points during an earthquake. Numerous studies demonstrate the unique utility of vertical seismic arrays for studying in situ site response and soil behavior. Examples are given of analyses made at two sites to show the value of data from vertical seismic arrays. The sites examined are the Lotung, Taiwan SMART1 array and a new site installed at Jingliao, Taiwan. Details of the installation of the Jingliao array are given. ARX models are theoretically the correct process models for vertical wave propagation in the layered earth, and are used to linearly map deeper sensor input signals to shallower sensor output signals. An example of Event 16 at the Lotung array is given. This same data, when examined in detail with a Bayesian inference model, can also be explained by nonlinear filters yielding commonly accepted soil degradation curves. Results from applying an ARMAX model to data from the Jingliao vertical seismic array are presented. Estimates of inter-transducer soil increment resonant frequency, shear modulus, and damping ratio are presented. The shear modulus varied from 50 to 150 MPa, and damping ratio between 8% and 15%. A new hardware monitoring system - TerraScope - is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. An internal 16-bit micro-controller oversees all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage.