• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.277-282
• /
• 2008

A fully integrated inductorless CMOS impulse radio ultra-wideband (IR-UWB) receiver is implemented using $0.18\;{\mu}m$ CMOS technology for 3-5 GHz application. The UWB receiver adopts the non-coherent architecture, which removes the complexity of RF architecture and reduces power consumption. The receiver consists of inductorless differential three stage LNA, envelope detector, variable gain amplifier (VGA), and comparator. The measured sensitivity is -70 dBm in the condition of 5 Mbps and BER of $10^{-3}$. The receiver chip size is only $1.8\;mm\;{\times}\;0.9\;mm$. The consumed current is 15 mA with 1.8 V supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1658-1660
• /
• 1994

This paper describes the measurement system of the magnetic field waveforms generated by lightning return strokes. The frequency bandwidth of magnetic field measurement system is from 270[Hz] to about 2.3 [MHz]. As the application experiment, the magnetic field generated by simple impulse and oscillating impulse currents, which are measured by a current transformer (Tek. AM503), is observed by the trial magnetic field measurement system. The obtained results are agreement with each other. A typical magnetic field waveform associated with lightning return strokes was recorded and presented.

• Structural Engineering and Mechanics
• /
• 제39권2호
• /
• pp.287-301
• /
• 2011

This paper is focused on the residual capacity of steel columns, as a damage criterion. Load-Impulse (P-I) diagrams are frequently used for analysis, design, or assessment of blast resistant structures. The residual load carrying capacity of a simply supported steel column was derived as a damage criterion based on a SDOF computational approach. Dimensionless P-I diagrams were generated numerically with this quantitative damage criterion. These numerical P-I diagrams were used to show that traditional constant ductility ratios adopted as damage criteria are not appropriate for either the design or damage assessment of blast resistant steel columns, and that the current approach could be a much more appropriate alternative.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1466-1467
• /
• 2007

A new parameter W/R for the class I test have been introduced in the IEC 61643-1 published in 2005. One of the possible test impulses which meets the parameters for class I test is the 10/350 [${\mu}s$] waveshape proposed in IEC61312-1. 10/350 [${\mu}s$] waveshape meets parameters for class I test in the IEC 61643-1. The impulse generator for making the 10/350 [${\mu}s$] waveshape is consist of IVG, ICG, crowbar coil and crowbar switch. The electric change Q and the specific energy W/R were measured and calculated using the exclusive use measuring software according to the formula of IEC 611643-1. We verified the correspondence between measured results using impulse generator and recommended parameters by IEC 61643-1.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.97-99
• /
• 1998

This paper presents a numerical study of the behavior of the transformer winding, when stressed by the standard impulse voltage. The mathematical model of the transformer takes several points into the account. Capacitance of not adjacent winding as well as adjacent winding, eddy current loss caused by self and mutual inductance given as the functions of frequency. Not like the previous approach where calculation of capacitance is performed, in average sense. In this paper, capacitance of both adjacent and not adjacent winding is calculated using the numerical approach(B.E.M.), so they can get the more accurate value of capacitance. Because of frequency dependency of inductance, numerical-laplace-transform technique is required. Finally, to validate this approach, a simple test winding is simulated.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.79-86
• /
• 2008

본 논문은 온도변화에 따른 $SF_6/N_2$ 혼합가스 중에서 높은 불평등전계의 임펄스절연파괴특성에 대한 실험적인 결과를 기술하였다. 온도범위는 $-25{\sim}25[^{\circ}C]$로 정하여 실험을 수행하였다. 임펄스 전구방전진전은 방전전류와 방전 광신호의 측정에 의해 분석되었다. 결과로써, 절연파괴전압은 정극성보다 부각성에서 온도변화에 대한 의존성이 강하게 나타났다. 온도가 상승함에 따라 부극성에서의 리더진전 스텝핑시간이 정극성보다 더 길게 나타났다. 본 연구 결과는 뇌서지에 대하여 우수한 성능을 가지는 가스절연선로의 설계에 유용한 정보가 될 것이다.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.793-803
• /
• 1998

Since most clothing research has still centered around buying behavior, the importance of consumer behavior which exists outside the purchase context has been neglected. This orientation focusing solely on purchase-related processes is deficient as it cannot account for consumer behavior that is recreational or that occurs without a recognized consumption need. In this vein, clothing browsing behavior can be a significant variable that has effects on clothing purchase-related variables. So to speak, browsers do make purchases at times; delayed-action purchases, impulse purchases and browsers may provide other less informed people with product information. In this study, we used definition proposed by Bloch and Richins(1983), which defines non purchase shopping(browsing) as 1,he examination of merchandises of a store for recreational or informational purposes without a current intention to buy. The specific objectives of the study were to identify the dimensions of clothing non -purchase shopping and to determine the causal relationship among clothing involvement, non-purchase shopping, impulse buying, purchase quantity, opinion leadership. The questionnaire method was used and 366 questionnaires were analyzed. Results can be summarized as follows. First, the non-purchase shopping was divided into two dimensions such as recreational non-purchase shopping and informational non-purchase shopping Of the two dimensions, recreational dimension explained the greater part than informational one. Second, it was revealed that clothing involvement was strongly positively related to non-purchase shopping, which influenced considerably on impulse buying, purchase quantity, and opinion leadership. In other words, clothing non-purchase shopping behaivor is very significant concept of clothing product category and has considerable effects on clothing buying though it occurs independently of purchase, so it seems that much more concern will be needed on this concept.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1302-1307
• /
• 2013

MOV(Metal Oxide Varistor) is the most important part of SPD(Surge Protective Device) which can protect electric facilities from an impulse current such as a lightning. So far, the fault of MOVs have decided only by surge count without considering magnitude of surge current and an amount of input energy. This paper proposed the fault prediction algorithm for the MOV using look up table made by surge count and input current data which have non-linear characteristics for input current and are estimated by high voltage experimental results. Proposed algorithm was proved by experiment on verification at a high voltage laboratory.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.289-292
• /
• 2008

This paper describes the electrical characteristics of the ZnO surge arrester according to the variation of surrounding conditions. To investigate the characteristics of degraded ZnO surge arrester, 8/20 [${\mu$s], 2.5 [kA] impulse currents were applied to the ZnO surge arrester to be test. To present the effect of the surrounding con야tions, the leakage currents of ZnO surge arrester were measured to the surrounding temperature and wet conditions. As a result, the increase of ambient temperature causes the increase of resistive leakage current of ZnO surge arrester. Also, in the wet test, the outside leakage current through the ZnO surge arrester housing is much larger than the intrinsic leakage current.

• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.44-50
• /
• 2005

본 논문에서는 산화아연(이하 ZnO) 피뢰기 열화진행의 한 요인으로 예측되는 전극과 ZnO소자 사이에서 발생하는 방전광 현상에 관한 연구를 수행하였다. 이를 위해 $8/20[{\mu}s]$, 최대 10[kA]의 뇌임펄스전류를 발생시키는 뇌임펄스전류 발생장치를 설계${\cdot} $제작하였다. 실험결과, 상${\cdot}$하부의 전극 부근에서 발생하는 방전광의 형상은 인가되는 뇌임펄스의 극성에 따라 다르게 나타났으며 상대적으로 (-)극의 전극부근에서 방전광이 더 강하고 활발하게 발생하는 것으로 관찰되었다. 또한 전극의 면적에 따른 방전광의 세기는 전극의 면적이 증가할수록 감소하는 것으로 관측되었다. 동시에 전극과 소자의 접촉상태도 방전광의 발생과 매우 밀접한 관계가 있는 것으로 확인되었다. 따라서 배전급 ZnO피뢰기의 기존 전극구조는 보완이 필요하며 ZnO피뢰기 제품의 성능향상 및 지속적인 성능유지를 위해서는 환형구조 대신 내부면적이 있는 원판구조로 교체하는 것이 바람직하다고 판단된다.