• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.19-28
• /
• 2017

In this paper, detailed safety inspection reports on the 915 expressway bridges which had been published from 1996 to 2010 are collected and condition of these bridges are analyzed. Damages are categorized into 'damage by defect', 'damage by physical force', and 'damage by deterioration' and the concept of damage possession rate is introduced to investigate the occurrence time and the characteristics of damages. Based on the top 10 damage patterns of expressway bridges and the deterioration characteristics of heavy snow and freezing cold area, reasonable improvement direction of inspection activity is suggested. From this study, it is known that improvement of inspection regularization during construction or at completion stage of bridges is needed. Since the deterioration progress of the heavy snow and freezing cold area is faster than that of general area, environmental characteristics should be considered in inspection activity. The results of present study can be widely used for improvement of inspection activity of expressway bridges.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.32-43
• /
• 2014

Worldwide, air transport demand of this century is expanding rapidly, and each countries' demand is also increasing. Thus a number of low-cost carriers emerged in existing air transportation business sector and airman qualification check work regarding aviation safety management is increasing too. As the remedy for the result of aviation safety audit by ICAO and FAA in 2001 that governmental activity for aviation safety had been performed by a small number of aviation safety inspectors, airman qualification inspection system implemented by airlines was improved and the government has established the system that authorized airman qualification inspectors check airmen qualification with airlines according to the international trend. This study suggests the need of improvement of airman qualification inspection system that existing inspection system as the means of safety management can be transferred to Operations Safety Inspection(OSI) activity which is compliant with international standards.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.210-217
• /
• 2021

In the case of an agile-based project, it was inadequate to perform a comprehensive inspection and evaluation on the establishment and operation of an information system by performing audit only with the audit and inspection elements provided by the existing information system audit and inspection system. In particular, in the case of the test activity area, it was necessary to improve the test activity audit check items to comprehensively check the agile-based development process by applying the existing audit system. To this end, a test activity improvement check model of the agile methodology audit model was presented by applying the repetition concept, a characteristic of the agile methodology. In order to empirically verify the model of this study, a survey was conducted for auditors and designers/developers who have experience in performing agile-based projects and auditing information systems. As a result of the questionnaire on the integrated test and system test in the test stage, more than 70% of the respondents were found to be suitable. More than 80% of the respondents judged that it was appropriate as a result of the questionnaire on "improvement and regression test progress according to integrated test and system test results" and "integrated test and functional actions of components and subsystems".

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.169-178
• /
• 2010

Generally speaking, the demolition works is the subsequent construction activity which has been done after building life-span of twenty two years or so. However, it was not prepared suitable systems and laws and regulations as long-term solutions. In this study, it was suggested the improvement guideline of safety management-related laws in domestic demolition works. The three improvement of laws was suggested as follows. ${\bullet}$ First, it was suggested proposals for demolition works standards in safety management plan of management law for construction activity. ${\bullet}$ Secondly, it was provided improvements for standard safety work guide of demolition works of industrial safety and health law. ${\bullet}$ Third, it was proposed integration method of redundancy in safety management plan and risk assessment regulations.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.409-416
• /
• 2020

This paper proposes a study measuring productivity improvement by using a type of technology called "Machine Guidance" through work sampling in earthwork. Earthwork is the activity typically on the critical path, indicating that productivity for the activity is critical for managing schedule on time. Thanks to the development of sensing and information system technologies, productivity for earthwork has been improved. While there have been many studies investigating the application of a certain type of technology to earthwork, few studies have measured the productivity improvement and presented how the technology leads to productivity improvement. Based on the thorough literature review, it is hypothesized that Machine Guidance contributes to improving productivity of earthwork by reducing indirect workhours spent for information waiting and inspection. In addition to the literature review, this paper presents a research model to test the hypothesis by using the work sampling technique. By proving and quantifying the productivity improvement from the technology use, this study can help practitioners justify the investment for technology use, which will contribute to the deployment of technology and more effective execution of earthwork.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.334-342
• /
• 2018

Purpose: The purpose of this study is to examine and improve the issues related to National Safety Inspection currently operation and reform the system for response to various disasters. Method: For the completion, this study established theoretical background using materials related to National Safety Inspection and identified the issues using the open statistical data for National Safety Inspection to suggest the improvement plans. Results: National Safety Inspection has been operating a complete large-scale inspection on risk factors in cooperation with the central government, local governments, and citizens since 2015 to remove various disaster factors neglected in people's daily lives. Operation of National Safety Inspection had positive influence in preventing major disasters. However, inefficient activity is pointed out due to issues related to cooperation with other institutes, limitation for citizen's positional role, and superficial inspection. Conclution: To solve this issue, this study proposed strengthening of communication activity with disaster institutes, strengthening of efficiency through citizen participation by type, and actualization of checklist used in National Safety Inspection.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.74-85
• /
• 2022

The purpose of this paper is to review the applicability of the current standards for the evaluation method of input variables and performance level in seismic performance evaluation by dynamic plastic analysis of the concrete gravity-type dam to which MCE is applied, and to suggest improvements. To this end, a domestic concrete gravity-type dam was selected as a target facility, dynamic plasticity analysis was performed under various conditions, and applicability to input variables such as concrete tensile strength and breaking energy, was reviewed. By analyzing the effect of cracks at the bottom of the gravity dam on the stability of the activity, an improvement plan for the performance level evaluation method required to secure the water storage function was derived. If the proposed improvement plan is applied, it will have the effect of deriving more reasonable evaluation results than the current seismic performance evaluation method to which MCE is applied.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.109-115
• /
• 2017

In order to increase the productivity of the logistics center and transportation, we try to articulate the priority ranking factors of the productivity influenced by the personality of the field workers (logistics center workers) and functional workers (drivers) via the AHP technique Individual personality was studied by applying the Big 5 model of psychological factors (openness, Conscientiousness, extroversion, Agreeableness, neuroticism). In this paper, extraversion was critically analyzed as a priority factor. A trait of extroversion is a strongly active and individual personality. In this study, the field workers are logistics center workers and the functional workers are drivers. They are interactively influenced in the In & Out operation. For example, when it comes to 'up and down work' and 'inspection work', the functional workers perform 'up and down work' and 'delivery work' and the field workers perform 'inspection work'. Stressing on the respective work has an affect on work productivity. Inspection workforce has something to do with inventory management. Functional workforce affects the delivery workforce. Delivery work is positively correlated with customer satisfaction. Nevertheless, as a result of research, extrovert personality that has something to do with an energetic activity would not affect on the implementation of their operation. In addition, personal extraversion of workers and drivers in the warehouse can have a significant impact on job commitment and productivity improvement.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.5 s.27
• /
• pp.148-156
• /
• 2005

By reviewing the existing researches of construction safety management, this study presented some problems; 1) preceding researches dealt only a formal system of safety management and did not focus on the practical safety management action, 2) there is an insufficient endeavor of utilizing the lessons teamed of successful construction sites and generalizing the success factors of safety management in the construction industry. The objective of this study is to propose and describe an effective construction safety management activity improvement reflecting success factors of the excellent construction cases and the preceding researches. To achieve this objective, the authors performed a case study of successful construction sites and proposed the major six safety activities. The author's point are illustrated through an explanation of the safety management activity improvement.

• Korean Journal of Occupational Health Nursing
• /
• v.3
• /
• pp.5-20
• /
• 1993

This study was aimed to investigate the actual condition of the performance of the occupational health nursing services, and to analyze a main cause which affects on the execution of its duties for occupational health nurses in occupational group health service. It had been surveyed by responsed data from the 105 respondents out of 180 persons. The results were as follows : 1. In performance of occupational health nursing services by the number of assigned plant, participation rate of health examination tended to significantly increase with decreasing the number of assigned and it was observed that the visiting rate of every month was also significantly higher on touring inspection of work plant, recommendation of facility improvement for work environment, understanding the modification of manufacturing process, and inspection of welfare and sanitation facilities. 2. While they executed their nursing services according to duration of service, the more, their duration of service was, the higher, participation rate of health examination, health check in returning to work for injured workers, talk with other health managers on promoting welfare, service evaluation for a year plan, record of health statistic, and experience of first aid service were. And it was found out that the visiting rate of every month was also significantly higher on touring inspection of work plant. 3. In regard to occupational health nursing services by age, the participation rate of health examination and the experience of first aid service were significantly higher as the age increased. And also the visiting rate of every month was significantly higher on touring inspection of work plant, compared with young ones. 4. In performance of occupational health nursing services by the time required visiting plant, The shorter, the time required visiting plant was, the higher, the visiting rate of every month was, on time of health consultation for diseased workers, and inspection of welfare and sanitation facilities. 5. The subjects of health education were mostly liver disease and occupational hearing loss and video tape was used mostly in health education, monthly health education was the highest in 1-3 times(74.5%) and its duration was the highest in about 60 minutes(33.3%). 6. Vaccination of hepatitis among the specific health services was the highest accounting for 64.7%.