• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.39-49
• /
• 2011

Recently PBD method, one of acceleration of consolidation methods is used in the soft ground to shorten consolidation time for fast settlement during construction. It is economical and easy to work. Discharge capacity of PBD is sensitive in proportion to thickness of soft ground layer, and drainage of PBD declines due to disturbance effect in surrounding ground by mandrel used for vertical drainage setting and setting machines and type. Also, deviation of discharge capacity is large according to ground condition, construction condition and soil properties. In addition, when embankment loading is not conducted instantly after PBD setting due to rain or lack of embankment material supply, it causes leaving period problems. But cause and analysis of those problems for discharge capacity is lack. So, in this test, ground improvement and discharge capacity is investigated by implementing composite discharge capacity test for analysis of an effect factor of PBD discharge capacity with leaving period. After fixing the vertical drain on a cylindrical cylinder, put churned sample into the cylinder. Then leave 0day, 30day, 60day and 90day. And then, load following the loading step of 30, 70 and 120kPa using a pressure device. As a result, the longer leaving period, discharge capacity is reduced. It is caused by a decrease of discharge area caused by creep transformation moisture absorption of PBD filter after long leaving period.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.142-156
• /
• 2011

This study aims to suggest improvements in night landscape lighting of Bomun Lake, a representative waterfront landscape in Gyeongju which is the city designated as UNESCO World Heritage in December 2000. This study divided the area into three types of sections-that is, road section, walking section, and landscape section- based on the present condition of land use and users of the Bomun Lake area. In addition, this study classified the lightingtypes by section into nine lighting types-that is, road, crossroad, parking lot, pedestrian passage, trail, sculpture, tree, waterfront deck-by comparing them to the park lighting types suggested by the KS A illuminance standards, and examined the problems of the current Bomun Lake lighting base on the standards. By using this as basic data, this study established relevant plans and collected research material. This study suggested directions of each of the three sections and improvements in illuminance, color temperature, creating methods of each of the nine lighting types to the night Lighting planning of the Bomun Lake area reflecting the landscape characteristics of Gyeongju, a historical, cultural city.

• Journal of Communication Design
• /
• v.65
• /
• pp.530-538
• /
• 2018

Recently, museums are attracting the attention of visitors and society. However, research on museum interpretation conducted at domestic and foreign is relatively limited. The plan design of the museum commentary system was mainly based on the perspective of the experts, and most of them do not reflect the desire of the visitors. This study focused on visitors' experience of using museum Interpretation system. Through analyzing the effect of the Interpretation system of the museum that the visitor feels, we examined whether the Interpretation system of the museum meets the cultural needs of the visitors and identified the problems and deficiencies in the system. After that, the problems were rearranged and suggested the main elements of the commentary system of the museum finally, so as to help improve the museum commentary system and the educational function.In the first part of the study, the four major explanatory methods existing in the museum were confirmed. After that, we conducted in - depth interviews on four types of commentary methods and collected existing problems and deficiencies. The results of the type analysis were grouped into 14 types and the questionnaire was used to conduct a general survey on 14 problems. In this study, the user 's discomfort and problems were identified in the museum Interpretation system, and based on this, five key elements necessary for the museum Interpretation system were derived. Among them, inhalation is the weakest element in the museum commentary system, and future research will be conducted on how to apply each factor. I hope that you will be a reference material when you carry out research on the optimization of the Interpretation system of the museum and the improvement of the Interpretation experience.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.651-661
• /
• 2021

Eruca sativa, called arugula, is a perennial plant in the Brassicaceae family, an edible plant commonly used in Italian cuisine. To study as a cosmetic material application E. sativa was extracted with 70% ethanol (ES). Then ES was fractionated using n-hexane, chloroform, ethyl acetate, n-butyl alcohol and water (EHex, EEA, ECHCl₃, EBuOH and EDW). EEA showed mushroom tyrosinase inhibitory activity. ES, EEA and EBuOH showed inhibition of tyrosinase activity. As a result, ES is expected to have skin whitening efficacy. ES was applied to 0.05, 0.1% the toner and emulsion formulation to test the stability. The anti-microbial activity of eight bacteria and fungi including Staphylococcus aureus and Propionibacterium acnes which cause dermatitis and acne was evaluated. EEA showed effects in all of microorganisms. The toner and emulsion containing ES with 0.05, 0.1% were passed in the challenge test. At -20, 4, 25, 55 ℃ and daylight, there was no significant change on pH, viscosity for 4 months. However, emulsions had phase separation phenomenon at 55 ℃, so the base formulation needs improvement. In addition, through the skin penetration test, EEA penetrated 0.058% in 6 hr, predicting the clinical efficacy. This means that E. sativa can contribute whitening agent and the synergistic effect of preservatives.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.77-85
• /
• 2021

Glucosylceramides (GluCer) are known to play an important role in both water retention and epidermal permeability barrier function in the mammalian stratum corneum. In this study, we investigated the effects of pineapple fruit extract containing glucosylceramides (PFEG) on the maintenance and recovery of skin barrier function using atopic dermatitis-induced animal models. Five-week-old male Hos:HR-1 mice were divided into four groups fed on standard diet, unsaturated fatty acids-deficient (HR-AD) diet, and HR-AD diet supplemented with 0.01% or 0.1% pineapple-GluCer. Skin barrier function was evaluated by transepidermal water loss (TEWL), dermal moisture content, moisture content of the stratum corneum and wrinkle formation. The control group (HR-AD administration group) showed increased transepidermal water loss (TEWL), while the epidermal moisture content and the moisture content of the stratum corneum slowly decreased. However, in the PFEG groups (with 0.1% or 0.01% glucosylceramide), the TEWL levels were significantly reduced at 2 weeks. The PFEG also helped maintain skin moisturizing function by significantly suppressing the decrease of the epidermal moisture content and the moisture content of the stratum corneum. These results show that the PFEG is effective for maintaining and improving the function of the skin barrier. Therefore, this study suggests that PFEG is a potential candidate material for skin functional foods.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.61-68
• /
• 2020

In this study, the international standard ISO TS 16774 Part 3 Test Method for Water (wash out) Resistance and KS F 4935 ｢Sealant Injection type for water leakage maintenance of adhesive flexible rubber asphalt series｣, which are standardized as a quality control method of injection type repair materials used for water leakage cracks in underground concrete structures, are currently used in Korea. As a result, considering the performance criteria of "mass change rate -0.1%" stipulated in KS F 4935, the remaining 13 types repair materials, excluding RG-2 of synthetic rubber and UG-1 of urethane, need to be reviewed for stabilization of the loss resistance due to the flow of ground water. The results of this study are determined to be available as a basic indicator for the selection of repair materials used for cracks in concrete structures. In addition, it is expected that the results of this study can be utilized as reference data that can be reflected in the improvement of the quality of repair materials that will be researched and developed later.

• The Journal of Information Systems
• /
• v.30 no.1
• /
• pp.151-177
• /
• 2021

Purpose This paper aims to improve management performance by effectively responding to production needs and reducing inventory through synchronizing production planning and procurement in the aviation industry. In this study, the differences in production planning and execution were first analyzed in terms of demand, supply, inventory, and process using the big data collected from a domestic aircraft manufacturers. This paper analyzed the problems in procurement and inventory management using legacy big data from ERP system in the company. Based on the analysis, we performed a simulation to derive an efficient procurement and inventory management plan. Through analysis and simulation of operational data, we were able to discover procurement and inventory policies to effectively respond to production needs. Design/methodology/approach This is an empirical study to analyze the cause of decrease in inventory turnover and increase in inventory cost due to dis-synchronize between production requirements and procurement. The actual operation data, a total of 21,306,611 transaction data which are 18 months data from January 2019 to June 2020, were extracted from the ERP system. All them are such as basic information on materials, material consumption and movement history, inventory/receipt/shipment status, and production orders. To perform data analysis, it went through three steps. At first, we identified the current states and problems of production process to grasp the situation of what happened, and secondly, analyzed the data to identify expected problems through cross-link analysis between transactions, and finally, defined what to do. Many analysis techniques such as correlation analysis, moving average analysis, and linear regression analysis were applied to predict the status of inventory. A simulation was performed to analyze the appropriate inventory level according to the control of fluctuations in the production planing. In the simulation, we tested four alternatives how to coordinate the synchronization between the procurement plan and the production plan. All the alternatives give us more plausible results than actual operation in the past. Findings Based on the big data extracted from the ERP system, the relationship between the level of delivery and the distribution of fluctuations was analyzed in terms of demand, supply, inventory, and process. As a result of analyzing the inventory turnover rate, the root cause of the inventory increase were identified. In addition, based on the data on delivery and receipt performance, it was possible to accurately analyze how much gap occurs between supply and demand, and to figure out how much this affects the inventory level. Moreover, we were able to obtain the more predictable and insightful results through simulation that organizational performance such as inventory cost and lead time can be improved by synchronizing the production planning and purchase procurement with supply and demand information. The results of big data analysis and simulation gave us more insights in production planning, procurement, and inventory management for smart manufacturing and performance improvement.

• Membrane Journal
• /
• v.31 no.6
• /
• pp.434-442
• /
• 2021

Poly(vinylidene fluoride) (PVDF) membrane has a good membrane durability because of its high mechanical resistance, thermal and chemical stability. However, the strong hydrophobic property of PVDF membrane can induce a low water permeability and easy fouling by proteins and organic matters. In order to improve the anti-fouling properties of PVDF membrane, the PVDF mixed matrix asymmetric membranes impregnated with biofunctional material 𝛽-cyclodextrin (𝛽-CD) in the membrane structure were prepared by phase inversion method. The membrane filtration experiments of pure water and BSA solution were performed using the PVDF/𝛽-CD mixed matrix asymmetric membranes prepared according to the 𝛽-CD contents. The experiments showed that the introduction of 𝛽-CD into the PVDF polymer matrix contributed to increase in the hydrophilic property of the PVDF membranes, and this led to the reduction of contact angles and improvement of anti-fouling properties. The PVDF/𝛽-CD membrane which was prepared using the dope solution with a 2 wt% 𝛽-CD content represented 64 L/m²·h of pure water flux, 95% of BSA rejection and maximum 80% of flux enhancements compared to flux results of the pristine PVDF membrane.

• The Korea Journal of Herbology
• /
• v.37 no.4
• /
• pp.49-57
• /
• 2022

Objective : This study was conducted to investigate antidiabetic effects of chunggugjang with medicinal herbal complex (CJ) in streptozotocin (STZ)-induced animal models. Method : STZ (65 mg/kg) was injected intraperitoneally to induce diabetes. Then rats were divided into 5 groups ; NG (normal diet + 0.9% saline), COS (STZ +saline 5 mL/kg), COB (STZ + fermented soybean(100 mg/kg), CJ 100/200 (STZ+CJ(100 and 200 mg/kg), CJ 300/600 (STZ+CJ(300 and 600 mg/kg). 4 weeks later, oral glucose tolerance test (OGTT) was performed. After sacrificing rats, serum levels of blood urea nitrogen (BUN), creatinine, aspartate amino transferase (AST), alanine amino transferase (ALT), total cholesterol (TC), and triglyceride (TG) were measured and histological changes were observed. Result : Body weight change and food efficiency ratio (FER) were decreased in the CJ 300/600 group than in the COS group. But, there was no change in water intake. Serum levels of glucose, AST, ALT and BUN were lower in the CJ 300/600 group than in the COS group. Also, TG, TC, and creatinine were decreased in the CJ 300/600 group than in the COS group. According to OGTT, 120 minutes postprandial glucose levels were lower in the CJ 300/600 group than in the COS group. In addition, administration of CJ extracts restored histopathological damage. Conclusion : The results suggest that CJ can be used as a functional material for diabetes treatment as it has the effect to improve pathological symptoms in STZ-induced diabetic rats.

• Composites Research
• /
• v.35 no.3
• /
• pp.147-152
• /
• 2022

Low-temperature characteristics according to internal temperature conditions during rotational molding of Type 4 pressure vessel liners were studied in this paper. Since rotational molding has a sensitive effect on the formability of the liner depending on the temperature conditions, the temperature conditions for the polyamide used should be accurately set. The structural changes of polyamide as the liner material was analyzed the surface by atomic force microscope (AFM), and the crystallinity measured with a differential scanning calorimeter (DSC) is used to evaluate the change of the mechanical strength value at low temperature. In addition, the formability of the liner was confirmed by observation of the yellow index inside the liner. As a result, as the melting range of the internal temperature becomes wider, the yellow index shows a lower value, and the elongation and impact characteristics at low temperatures are improved. It was also confirmed that the structure of the polyamide was uniform and the crystallinity was high by AFM and DSC. These experimental results contribute to the improvement of characteristics at low temperatures due to changes in temperature conditions during rotational molding.