• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.4
• /
• pp.333-339
• /
• 2003

New manufacturing process was applied to manufacture the low salted Squid-Jeotgal to improve the quality variation salty taste and shelf-life. It's optimum salting and sugaring process was made by the addition of $17\%$ NaCl for 3 hr and $15\%$ corn syrup for 4 hr with 10 rpm agitation. Quality variations of Squid-Jeotgal produced by the improved and the conventional process were packed by jar, polyethylene lerephthalatefpolyethyleneilinear low density polyethylene (PET) and low density polyethylene (PE). And then quality variations of them were investigated at storage temperature of 10, 20, and $30^{\circ}C.$ Decreasing rate of pH, increasing rates of VBN and viable cell counts of Squid-Jeotgal produced by the improved process were slower than those of the conventional process at all storage temperature. Sensory evaluation indicated that the production of Squid-Jeotgal by the improved process extended the shelf-life about 10-20 days.

• Journal of Korean Society for Quality Management
• /
• v.24 no.4
• /
• pp.90-102
• /
• 1996

Process incapability index which is intended to evaluate the process capability by measuring process incapability provides more detailed information by dividing information about the process mean and variance. But when the target value is not consistent with the center of specification, it is very difficult to evaluate the process capability accurately. Thus it is necessary to improve the existing process incapability index. The improved process incapability index can identify the variation of the process faster than other process capability indices when applied firstly, to the precision process which can be affected sensitively by the change of the process, secondly, to the ordinary process where cost difference from the change of process is noticeable. By using subindices such as inaccuracy index and imprecision index, it is easier for quality manager to find where the cause of the variation of process is, and to take necessary action in advance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.12
• /
• pp.1310-1317
• /
• 2012

This study examines the possibilities to improve natural dyestuff's (Pinux$^{TM}$) dyeability and colorfastness for C/R (Cotton/Rayon (40/60)) and W/T (Wool/Tencel (10/90)) knitted fabrics in cationizing and smectiting for pre-treatment, simultaneous-treatment and post-treatment process sequences; as well as various other treatment methods. The sample dyeability showed the strongest K/S value in the order of smectite (S) < cationization + smectite (C+S) < cationization (C); however, the K/S value showed a low level in the simultaneoustreatment method of smectite. Colorfastness to washing improved in the order of C < C+S < S, and after the smectite post-treatment process, C/R improved from Grade 1 to Grade 4 and W/T improved from Grade 1-2 to Grade 4. Colorfastness to perspiration generally improved in the same order as the colorfastness to washing and after the smectite post-treatment process C/R, W/T sample's acidic and alkaline colorfastness to perspiration improved greatly. As for the colorfastness to rubbing, the addition of smectite in the simultaneous-treatment and post-treatment processes resulted in improved wet-colorfastness; however, smectite showed less effect on the colorfastness to light compared to other colorfastness ratings.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.904-911
• /
• 2001

High-density lead zirconate titanate(Pb(Zr$\_$0.53/Ti$\_$0.47/)O$_3$, PZT) ceramics were fabricated by a new milling-precipitation(MP) process improved from the conventional solid state process. This process was progressed by a milling impregnation through mixing ZrO$_2$ and TiO$_2$ powders with lead nitrate(Pb(NO$_3$)$_2$) water solution in zirconia ball media, and then milling precipitation was induced from precipitation of PbC$_2$O$_4$ by adding ammonium of oxalate monohydrate((NH$_4$)$_2$C$_2$O$_4$$.$H$_2$O) as a precipitant. As a result of this process, single-phase perovskite structure was formed at the calcination temperature of 750$\^{C}$ for Pb(Zr$\_$0.53/Ti$\_$0.47/)O$_3$ powders. In addition, the highest density at the sintering temperature of 1100$\^{C}$ was obtained, because of the highly sinterable PZT Powders ground through the re-milling process. Piezoelectric and dielectric properties of sintered sample were improved by MP process.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.625-633
• /
• 2005

Vehicle drift was reduced using statistical six sigma tools. The study was performed through four steps: M (measure), A (analyze), I (improve), and C (control). Step M measured the main factors which were derived from a fishbone diagram. The measurement system capabilities were analyzed and improved before measurement. Step A analyzed critical problems by examining the process capability and control chart derived from the measured values. Step I analyzed the influence of the main factors on vehicle drift using DOE (design of experiment) to derive the CTQ (critical to quality). The tire conicity and toe angle difference proved to be CTQ. This information enabled the manufacturing process related with the CTQ to be improved. The respective toe angle tolerance for the adjustment process was obtained using the Monte Carlo simulation. Step C verified and controlled the improved results through hypothesis testing and Monte Carlo simulation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.76-79
• /
• 2004

This research was carried out to evaluate role of supplementary reagents, such as phosphate and SDS, to remove hydrophobic organic contaminant from soils during the EK-Fenton process. The $H_2O$$_2$ stability improved due to the role as stabilizer of phosphate and SDS during the EK-Fenton process. Furthermore, although pH in region near cathode was 8.2 after test, $H_2O$$_2$ stability improved due to transportation of SDS in the region near cathode. Therefore, in tests using phosphate and SDS as supplementary reagent, the efficiency of phenanthrene treatment improved through the EK-Fenton process using longer reaction time.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1120-1123
• /
• 1996

DMC(Dynamic Matrix Control) algorithm has been successfully used in industries for more than a decade. It can handle constraints and easily extended to MIMO case. The application of DMC, however, is limited to the open loop stable process because it uses the FIR(Finite Impulse Response) or FSR(Finite Step Response) model. Integrating process widely used in chemical process industry, is the representative open loop unstable process. The disturbance rejection of DMC is relatively poor due to the assumption that the current disturbance is equivalent to the future disturbance. We propose the IDMC(Improved Dynamic Matrix Control) for the integrating process, as well as non-integrating process. IDMC has shown better disturbance rejection using multi-step ahead predictor for the disturbance.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.521-524
• /
• 2014

Pyronaridine tetraphosphate (1) is a well-known antimalarial drug. However, it required a carefully optimized production process for the manufacture of pyronaridine tetraphosphate. Each step of its manufacturing process was reinvestigated. For the cyclization of 4-chloro-2-(6-methoxy-pyridin-3-yl-amino)-benzoic acid 6 to 7,10-dichloro-2-methoxybenzo[b]-1,5-naphthyridine 5, an improved process was developed to eliminated critical process impurity (BIA). By the redesign of the formation of triphosphate salt, the purity as API grade was increased. Thus, a robust manufacturing process with an acceptable process performance has been developed to produce high quality pyronaridine tetraphosphate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.102.2-102
• /
• 2002

In this paper, the improved Multi-FNN (Fuzzy-Neural Networks) model is identified and optimized using HCM (Hard C-Means) clustering method and optimization algorithms. The proposed Multi-FNN is based on FNN and use simplified and linear inference as fuzzy inference method and error back propagation algorithm as learning rules. We use a HCM clustering and genetic algorithms (GAs) to identify both the structure and the parameters of a Multi-FNN model. Here, HCM clustering method, which is carried out for the process data preprocessing of system modeling, is utilized to determine the structure of Multi-FNN according to the divisions of input-output space using I/O process data. Also, the parame...