• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.186-193
• /
• 2005

Purpose: To improve the management of a medical linear accelerator, the records of operational failures of a Varian CL2l00C over a ten year period were retrospectively analyzed. Materials and Methods: The failures were classified according to the involved functional subunits, with each class rated Into one of three levels depending on the operational conditions. The relationships between the failure rate and working ratio and between the failure rate and outside temperature were investigated. In addition, the average life time of the main part and the operating efficiency over the last 4 years were analyzed. Results: Among the recorded failures (total 587 failures), the most frequent failure was observed in the parts related with the collimation system, including the monitor chamber, which accounted for $20\%$ of all failures. With regard to the operational conditions, 2nd level of failures, which temporally interrupted treatments, were the most frequent. Third level of failures, which interrupted treatment for more than several hours, were mostly caused by the accelerating subunit. The number of failures was increased with number of treatments and operating time. The average life-times of the Klystron and Thyratron became shorter as the working ratio increased, and were 42 and $83\%$ of the expected values, respectively. The operating efficiency was maintained at $95\%$ or higher, but this value slightly decreased. There was no significant correlation between the number of failures and the outside temperature. Conclusion: The maintenance of detailed equipment problems and failures records over a long period of time can provide good knowledge of equipment function as well as the capability of predicting future failure. Wore rigorous equipment maintenance Is required for old medical linear accelerators for the advanced avoidance of serious failure and to improve the qualify of patient treatment.

• Journal of Korean Society of Forest Science
• /
• v.9 no.1
• /
• pp.1-44
• /
• 1969

The important results which have been obtained in the investigation can be recapitulated as follows. 1. As demostrated by the experimental results and analyses concerning their effects in the on-ground type mushroom house, the constructions in relation to the side wall and ceiling of the experimental houses showed a sufficient heat insulation on effect to protect insides of the houses from outside climatic conditions. 2. As the effect on the solar type experimental mushroom house which was constructed in a half basement has been shown by the experimental results and analyses, it has been proved to be effective for making use of solar heat. However there were found two problems to be improved for putting solar houses to practical use in the farm mushroom growing: (1) the construction of the roof and ceiling should be the same as for the on-ground type house, and (2) the solar heat generating system should be reconstructed properly. A trial solar heat generating system is shown in Fig. 40. 3. Among several ventilation systems which have been studied in the experiments, the underground earthen pipe and ceiling ventilation, and vertical side wall and ceiling ventilation systems have been proved to be most effective for natural ventilation. 4. The experimental results have shown that ventilation systems such as the vertical side wall and underground ventilation systems are suitable to put to practical use as natural ventilation systems for farm mushroom houses. These ventilation systems can remarkably improve the temperature of fresh air which is introduced into the house by heat transfers within the ventilation passages, so as to approach to the desired temperature of the house without any cooling or heating operation. For example, if it is assuming that x is the outside temperature and y is the amount of temperature adjustment made by the influence of the ventilation system, the relationships that exist between x and y can be expressed by the following regression lines. Underground iron pipe ventilation system ${\cdots}{\cdots}$ y=0.9x-12.8 Underground earthen pipe ventilation system ${\cdots}{\cdots}$y=0.96x-15.11 Vertical side wall ventilation system${\cdots}{\cdots}$ y=0.94x-17.57 5. The experimental results have shown that the relationships existing between the admitted and expelled air and the $Co_2$ concentration can be described with experimental regression lines or an exponent equation as follows: 1) If it is assumed that x is an air speed cm/sec. and y is an expelled air speed in cm/sec. in a natural ventilation system, since the y is a function of the x, the relationships that exist between x and y can be expressed by the regression lines shown below: 2) If it is assumed that x is an admitted volume of air in $m^3/hr$ and y is an expelled volume of air in $m^3/hr$ in a natural ventilation system, since the y is a function of the x, the relationships that exist between x and y can be expressed by the regression lines shown below. 3) If it is assumed that the expelled air speed in cm/sec and replacement air speed in cm/sec. at the bed surface in a natural ventilation system are shown as x and y, respectively, since the y is a function of the x, the relationships that exist between x and y can be expressed by the following regression line: G.E. (100%)- C.V. (50%) ventilation system${\cdots}$ y=0.54X+0.84 4) If it is assumed that the replacement air speed in cm/sec. at the bed surface is shown as x, and $CO_2$ concentration which is expressed by multiplying 1000 times the actual value of $CO_2$ % is shown as y, in a natural ventilation system, since the y is a function of the x the relationships that exist between x and y can be expressed by the following regression line: G.E. (100%)- C.V. (50%) ventilation system${\cdots}{\cdots}$ y=114.53-6.42x 5) If it is assumed that the expelled volume of air is shown as x and the $CO_2$ concentration which is expressed by multiplying 1000 times the actual of $CO_2$ % is shown as y in a natural ventilation system, since the y is a function of of the x, the relationships that exist between x and y can be expressed by the following exponent equation: G.E. (100%)-C.V. (50%) ventilation system${\cdots}{\cdots}$ $$y=127.18{\times}1.0093^{-X}$$ 6. The experimental results have shown that the ratios of the crass sectional area of the G.E. and C.V. vent to the total cubic capacity of the house, required for providing an adequate amount of air in a natural ventilation system, can be estimated as follows: G.E. (admitting vent of the underground ventilation)${\cdots}{\cdots}$ 0.30-0.5% (controllable) C.V. (expelling vent of the ceiling ventilation)${\cdots}{\cdots}$ 0.8-1.0% (controllable) 7. Among several heating devices which were studied in the experiments, the hot-water boilor which was modified to be fitted both as hot-water toiler and as a pressureless steam-water was found most suitable for farm mushroom growing.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.4
• /
• pp.320-328
• /
• 2004

Background : Pulmonary vascular changes which occur early in the course of chronic obstructive pulmonary disease (COPD) are prevalent manifestation and later cause pulmonary hypertension, which is a bad prognostic factor in COPD. Beraprost sodium (BPS), an orally active prostacyclin analogue, has been shown to improve survival in patients with primary pulmonary hypertension. This study investigated the effect of BPS in the patients with COPD. Methods : This is a double-blind randomized placebo-controlled, two center clinical trial. Twenty one consecutive patients with COPD were enrolled from June 2003 to June 2004 (patients treated with BPS for 3 months, BPS group, n=11; those with placebo, placebo group, n=10). The baseline demographic, pulmonary function and hemodynamic data were not significantly different between two groups. Results : On echocardiographic examination, trans tricuspid valve pressure gradient has decreased significantly after 3 months with beraprost in the BPS group [17.7(${\pm}11.4$) to 8.2(${\pm}8.9$) mm Hg, p-value<0.05], while there was no significant change in the control group. Six-minute walking distance has decreased in the control group and increased in the BPS group, but there was no statistical significance. Conclusion : In patients with COPD oral administration of BPS reduced the pulmonary arterial pressure. The clinical significance of this finding, that is improving symptoms and natural course of the disease, needs further study.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.4
• /
• pp.1045-1078
• /
• 2013

The purpose of the present study is to improve the effectiveness of Korea's ODA projects on agricultural technology transfer to Africa. This study investigates agricultural extension system of African countries and provides a direction of the systematic strategies of the Korean ODAs on agricultural technology. This study pays particular attention on Africanization of agricultural technology transfer of the Korean ODA strategies. Unlike the previous studies focusing mainly on micro level investigation on the ODA strategy development, the present study incorporates the agricultural technology dissemination system of Ethiopia and Uganda in a macro perspective to develop a desirable form of the ODA strategy. The findings illustrate that the technology dissemination systems of the case countries have different characteristics depending on the function and organization of extension agency. And their functional capability and role segmentation by the extension agency are differently configured, too. In case of Ethiopia, top-down structure for the agricultural extension system has been built. Farmers' group and field agent of the information delivery system has expanded their participation into the system. However, we also find that the system of Ethiopia still lacks effective use of its existing technology, since it puts more emphasis on management aspects than improvement of agricultural productivity for farmers. On the other hand, even though Uganda has established participatory extension system that encompasses the entire agencies of the extension system, government efforts to enhance the extension system are still concentrated on expanding research functions rather than technical dissemination. The results imply that promoting and strengthening localization of the ODA strategy has to be developed to make localization policy of the Korean ODA. The present study concludes with some specific policy implications for necessary conditions of the agricultural development in African countries.

• Journal of Nutrition and Health
• /
• v.48 no.5
• /
• pp.381-389
• /
• 2015

Purpose: The objective of this study was to investigate the effects of a high fructose and fat diet on bone growth and maturation in growing female rats. Methods: Three-week-old female SD rats were randomly assigned to four experimental groups; the control group (CON: fed control diet based on AIN-93G, n = 8); the high-fructose diet group (HFrc: fed control diet with 30% fructose, n = 8); the high-fat diet group (Hfat: fed control diet with 45 kcal% fat, n = 8); and the high-fat diet plus high fructose group (HFrc + HFat: fed diets 45 kcal% fat with 30% fructose, n = 8). Each group was assigned their respective diets for the remaining eight weeks. Bone-related parameters (bone mineral density (BMD) and structural parameters, osteocalcin (OC), deoxypyridinoline (DPD)) and morphologic changes of kidney were analyzed at the end of the experiment. Results: Final body weights and weight gain were higher in the HFat and HFrc + HFat groups and showed higher tendency in the HFrc group compared with those of the CON group (p < 0.05); however, no significant difference in caloric intake was observed among the four experimental groups. The serum OC levels of the HFrc and HFrc + HFat groups were lower than those of the CON and HFat groups (p < 0.05). Urinary levels of DPD did not differ among the experimental groups. BV/TV and Tb.N of trabecular bone were higher in the HFrc + HFat group and showed a higher tendency in the HFrc group than those of the CON and HFat groups (p < 0.05). Tb.Pf of trabecular bone were lower in the HFrc + HFat group than those in the CON and HFat groups (p < 0.05). However, no difference in trabecular BMD was observed among the experimental groups. Cortical bone volume was higher in the HFat and HFrc + HFat groups than in the CON and HFrc groups (p < 0.05). No morphology change in kidney was observed among the experimental groups. Conclusion: Our study suggests that 8 weeks of high-fructose and high fat intake could improve the bone quality (Structural parameters) of trabecular and cortical bone of tibia in growing female rats.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.1
• /
• pp.16-28
• /
• 2016

The study was conducted to compare and analyze the importance and performance of leisure destination selection attributes of persons who use recreational forests and rural tourism villages. This researcher investigated the use patterns of users to identify the ground for connection between recreational forest and rural tourism village, analyzed their recognition differences in physical selection attribute, program selection attribute, and service selection attribute in order for leisure destination selection, and conducted importance-performance analysis(IPA analysis) to draw a plan for connection. The main results and suggestions are presented as follows. First, recreational forests were visited by family users in order for rest and emotional cultivation and provided experience programs using simple public interest function of forest, whereas rural tourism villages were visited by family users, friends and co-workers, groups and club members to experience a variety of annual programs and understand regional cultures. It was found that it was necessary to connect natural forest with rural tourism village in order to meet the leisure needs of the people changed in diversified ways. Secondly, it was found that the connection between rural tourism village and recreational forest visited mainly for simple rest led to positive visit intention of users. It was expected that there will be various kinds of uses, including experience program participation, child education, and safe accommodations security. In other words, the connection between recreational forest and rural tourism village is an alternative to trigger actual demands and recreational forest activities with high quality. Thirdly, in the case of users of recreational forests, their performance of all selection attributes was lower than their importance of them. Therefore, overall improvements were needed. In particular, needed were the diversity, benefit, and promotion of programs, improvements in locality(themes), supply of lodges and convenient facilities, booking system, the purchase system of local special products, and professional skills of operators and managers. On contrary, the performance of program selection attribute of rural tourism village was high. Therefore, it was found that program attribute of rural tourism village was the main connection factor to activate recreational forest use. Fourthly, according to IPA analysis, the proper connections between loges, convenient facilities, and nearby touristattractions, which give high expectations and satisfaction to users, needed to remain. And it was required to make common efforts to accomplish the goal (income creation) of rural tourism village and improve booking system for visitors and performance of local special products sales opportunity. In addition, the essential factors to induce users' leisure destination selection were found to be maintenance of the use fee system of recreational forest, diversity of rural tourism village program, and retention of locality.

• Journal of Korean Society of Transportation
• /
• v.18 no.1
• /
• pp.75-85
• /
• 2000

In existing models in optimization, the crisp data improve has been used in the objective or constraints to derive the optimal solution, Besides, the subjective environments are eliminated because the complex and uncertain circumstances were regarded as Probable ambiguity, In other words those optimal solutions in the existing models could be the complete satisfactory solutions to the objective functions in the Process of application for industrial engineering methods to minimize risks of decision-making. As a result of those, decision-makers in location Problems couldn't face appropriately with the variation of demand as well as other variables and couldn't Provide the chance of wide selection because of the insufficient information. So under the circumstance. it has been to develop the model for the location and size decision problems of logistics facility in the use of the fuzzy theory in the intention of making the most reasonable decision in the Point of subjective view under ambiguous circumstances, in the foundation of the existing decision-making problems which must satisfy the constraints to optimize the objective function in strictly given conditions in this study. Introducing the Process used in this study after the establishment of a general mixed integer Programming(MIP) model based upon the result of existing studies to decide the location and size simultaneously, a fuzzy mixed integer Programming(FMIP) model has been developed in the use of fuzzy theory. And the general linear Programming software, LINDO 6.01 has been used to simulate, to evaluate the developed model with the examples and to judge of the appropriateness and adaptability of the model(FMIP) in the real world.

• Journal of muscle and joint health
• /
• v.5 no.2
• /
• pp.238-252
• /
• 1998

Reumatic arthritis is a disease with joint pain being one of the key symptoms. The patient suffers from the pain, stiff sensation and edema due to the inflammation taking Place In one or more joints. Accompanying these problems are fatigue, unusual exhaustion, fever, tachycardia and weakness. Inaddition, joints are often deformed and muscles shrink along with the progress of edema, coupled with depression and psychological instability resulting from the loss of the mobile function and limitations on the daily life. Some patients become fed up with the long and hard flight with the disease and just give up, which aggravates the symptoms. Others come to the hospital only when the conditions have become serious. We need to prevent these and guide the patients in the right direction. Against this backdrop, this study aims to look into the relations between the knowledge on the part of the patients together with their feeling of self-efficacy and the compliance. The results are expected to help the patients improve their life, In addition to providing useful materials for setting up appropriate plan for nursing intervention. The study was conducted by distributing questionnaire to 88 patients selected from the out-patient department of a university hospital in Inchon, from April 6 to 27, 1998. The following tools were used the yardstick of self-efficacy, developed in 1997 by the Society for the Health of Rheumatism Patients, was used for measuring the levels of knowledge and the feeling of self-efficacy. The degree of compliance was measured by the data collected from documents in addition to the results of the analysis of the interviews with the patients. The reliability of the tools was confirmed. In the analysis, the general characteristics were expressed in figures and percentages. The levels of knowledge, feeling of self-efficacy, and compliance were expressed in the average values and standard deviations. The relations among the variables following the general characteristics were analysed by the t-test and one-way ANOVA. The Pearson correction coefficient was used for the analysis of factors. Multiple-loop analysis was used to identify the variables affecting the compliance. The following are the results of this study. 1. Among the 88 patients, 18 were men and the remaining 70 were women, with a ratio 1 : 3.87. Regarding the age groups, 23 were between 50 and 59 years old, with those between 50 and 69 accounting for 51.1% of the total. High school graduates or higher amounted to 58%. Religious patients was 67% or 59 persons. Fifty nine percent were unemployed, and 58.3% (49 persons) had two children or fewer. The period of suffering from rheumatism varied between 2 months and IS years, with 70% less than years. 2. The average figure In relation to the of knowledge was 17.63 points over 30 or 58. 76%, which means a medium level. 3. The average figure of the feeling of self-efficacy was 60.06 points. 4. The level of compliance was 3.26, which was above average. 5. The relation between the feeling of self-efficacy and compliance showed an "r" value of 0.37, which was significant. It means that the higher the feeling, the greater the compliance points. 6. The analysis of the knowledge level revealed that the difference is found only between the college graduates and junior-high graduates or lower. 7. The feeling of self-efficacy varied along with the age and education level. 8. The general characteristics of patients as discussed above did not show significant difference with the compliance. 9. Regarding the elements influencing the compliance, the number of children, period of suffering, income, age, feering of self-efficacy, knowledge, and compliance had 54% of significance. In conclusion, rheumatism victims can lead a better life if they are appropriately educated, based on efficient training program from the early days of the disease ; if they become able to manage themselves thanks to the training ; and if they are helped by a program focusing on the increase of the feeling of self-efficacy aimed at changing patient's behavior.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Sleep Medicine and Psychophysiology
• /
• v.24 no.1
• /
• pp.38-45
• /
• 2017

Objectives: Sleep disturbance is a very rapidly growing disease with aging. The purpose of this study was to investigate the prevalence of sleep disturbances and its predictive factors in a three-year cohort study of people aged 60 years and over in Korea. Methods: In 2012 and 2014, we obtained data from a survey of the Korean Social Life, Health, and Aging Project. We asked participants if they had been diagnosed with stroke, myocardial infarction, angina pectoris, arthritis, pulmonary tuberculosis, asthma, cataract, glaucoma, hepatitis B, urinary incontinence, prostate hypertrophy, cancer, osteoporosis, hypertension, diabetes, hyperlipidemia, or metabolic syndrome. Cognitive function was assessed using the Mini-Mental State Examination for dementia screening in 2012, and depression was assessed using the Center for Epidemiologic Studies Depression Scale in 2012 and 2014. In 2015, a structured clinical interview for Axis I psychiatric disorders was administered to 235 people, and sleep disturbance was assessed using the Pittsburgh Sleep Quality Index. The perceived stress scale and the State-trait Anger Expression Inventory were also administered. Logistic regression analysis was used to predict sleep disturbance by gender, age, education, depression score, number of coexisting diseases in 2012 and 2014, current anger score, and perceived stress score. Results: Twenty-seven percent of the participants had sleep disturbances. Logistic regression analysis showed that the number of medical diseases three years ago, the depression score one year ago, and the current perceived stress significantly predicted sleep disturbances. Conclusion: Comorbid medical disease three years previous and depressive symptoms evaluated one year previous were predictive of current sleep disturbances. Further studies are needed to determine whether treatment of medical disease and depressive symptoms can improve sleep disturbances.