• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2443-2450
• /
• 2014

In the motion recognition system using depth image, the depth image is converted to the real world formed 3D point cloud data for efficient algorithm apply. And then, output depth image is converted by the projective world after algorithm apply. However, when coordinate conversion, rounding error and data loss by applied algorithm are occurred. In this paper, when convert 3D point cloud data to depth image, we proposed efficient conversion method and its hardware implementation without rounding error and data loss according image size change. The proposed system make progress using the OpenCV and the window program, and we test a system using the Kinect in real time. In addition, designed using Verilog-HDL and verified through the Zynq-7000 FPGA Board of Xilinx.

• Safety and Health at Work
• /
• v.2 no.4
• /
• pp.328-335
• /
• 2011

Objectives: Depressive disorder (DD) is a complex disease, and the assessment of work ability in patients with DD is also complicated. The checklist depression (CDp) has recently been developed to support such work ability assessments and has been recommended for implementation in insurance medicine, starting with an analysis of the organisational and social contexts. The aim of this study was to identify the potential facilitators and barriers in the use of the CDp by insurance physicians (IPs) during work ability assessments of employees on sick leave due to DD. Methods: A qualitative research was conducted based on semi-structured interviews. The participants were IPs with at least one year of work experience in performing work ability assessments. The interviews were audiotaped, transcribed and analysed qualitatively. Results: Ten IPs (7 males, 3 females; mean 53 years) were interviewed. Important facilitators, which emerged for use of the CDp, were an oral introduction for colleagues and staff, support from management, valuing the increased transparency in work ability assessments with using the CDp, having adequate time for assessments as well as modification of the appearance (colour, plasticised form) and content (clarifying aspects of the examples) of the assessment tool. The fear of the loss of autonomy, lack of added value of the CDp, high workload, inadequate instructions and lack of time were mentioned as barriers. Conclusion: Adequate introduction to the use of CDp and the fear of the loss of autonomy of IPs need special attention in planning its implementation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.45-50
• /
• 2010

An image interpolation is a technique to use for enhancement of image resolution, it have two problems which are image quality degradation of the interpolated result image and high computation complexity. In this paper, to solve the problem, we propose an image interpolation algorithm using loss information estimation and implement the proposed method on portable device. From reduction image of obtained low resolution image, the proposed method can computes error to use image interpolated and estimate loss information by interpolation of the computed error. The estimated loss information is added to interpolated high resolution image with weight factor. We verified that the proposed method has improved FSNR as 2dB than conventional algorithms by experiments. Also, we implemented the proposed method on portable device and checked up real-time action. The proposed algorithm may be helpful for various application for image enlargement and reconstruction.

• Health Policy and Management
• /
• v.11 no.4
• /
• pp.70-87
• /
• 2001

The purpose of this study was to identify health care providers' perceptions about the goal achievement and benefit/loss caused by the separation policy of drug prescribing and dispensing after the policy implemented on July 1, 2001. Uslng stratified sampling method based on the administration area, Ku, 315 physicians and pharmacists were sampled from the rosters of physician and pharmacist association in the city of Busan on 2001. There were 122 and 115 responses from physician and pharmacist sample, respectively. 78.3% of physicians and 50.4% of pharmacists evaluated that the goal of the policy was not achieved. Moreover, 75.3% of physicians and 40.7% of pharmacists did not support the policy. Most physicians and pharmacists considered preventing the citizens with drug abuse and misuses as the most important benefit derived from the policy. However, physicians and pharmacists concerned over raising health care cost that could be patients' burden. The most important physicians' benefit derived from the policy was free choice of all possible medicine that might result in effectiveness of medication. In physicians' the most important loss, most physicians worried about that breaking traditional patient and physician relationship might cause physicians' authority in treating diseases to be damaged. Pharmacists considered the most important policy benefit as hiked social status resulted from enforcement of profession due to the policy whereas they considered the most significant loss as expected financial problems of small pharmacies compared to that of large pharmacies or pharmacies adjacent to hospitals. In the current problems of the policy, physician and pharmacists blamed the government for inadequate preparations of the policy implementation. Physicians and pharmacists also considered citizens' mature attitudes toward the policy as a crucial success factor.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.850-854
• /
• 2014

Analyzing dynamic performance between pantograph and contact wire depends on mechanical and electrical conditions such as contact force, currents, aerodynamics of pantograph and tension of overhead contact wire. For the characteristic of dynamic performance between pantograph and overhead contact wire, various evaluation systems are used to measuring of the interaction of the contact line and the pantograph. Among the various methods, the contact force and percentage of arcing are intended to prove the safety and the quality of the current collection system on the train. However, these methods are only capable of measuring on the train which are installed measurement systems. Therefore in this paper, a track-side monitoring system was implemented to measure electrical characteristics from active overhead contact wire systems in order to constantly estimate current collection performance of railway operation. In addition, a method to analyze loss of contact phenomena was proposed. According to simulation results, the proposed system was capable of measuring abnormal electrical behavior of pantograph and contact wires on the track-side. The advantage of the proposed system is possible to detect loss of contact or any other electrical abnormalities of all types of trains within sections from sub to sub without the need to install any on-board equipment on trains.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.331-337
• /
• 2022

In 2021, the Joint Group of Experts on the Scientific Aspects of Marine Environmental Protection (GESAMP), a U.N. advisory research institute, cited container loss as one of six sources of marine litters in shipping. The sinking of the X-P ress Pearl in May 2021 caused a catastrophic environmental pollution accident in which the loaded containers were moved to the shore, and the plastic pellets were loaded inside covered the coast of Sri Lanka. With this history, the International Maritime Organization (IMO) will discuss prevention and follow-up measures for container loss during ship voyages, as an agenda at the 8th Sub Committee on Carriage of Cargoes and Containers meeting in September 2022. To establish Korea's response direction at the IMO meeting, this study identified major causes of container loss accidents, and considered the response through analysis based on the accident investigation report and related professional data. As a result, it was found that the major cause of container loss during voyages was the enlargement of container ships, bad weather, and poor loading of containers. In particular, the need to prepare countermeasures for the deterioration of the operational safety of large container ships due to bad weather was identified. Additionally, integrated monitoring of the implementation of international conventions is required, for the safe sea transportation of container cargo. In particular, in terms of preservation of the marine environment, it is necessary to supplement the system for the recovery of lost containers. Finally, it was found that it is necessary to establish systems that can complement each other in the shipbuilding and shipping industries, in terms of shipbuilding as well as ship operation, to fundamentally prevent container loss accidents at sea. It is judged that it is difficult to resolve the various factors of container loss at sea during voyages, by responding from an individual perspective.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.130-136
• /
• 2020

There are many problems that occur currently in agriculture industries. The problems such as unexpected of changing weather condition, lack of labor, dry soil were some of the reasons that may cause the growth of the plants. Condition of the weather in local area is inconsistent due to the global warming effect thus affecting the production of the crops. Furthermore, the loss of farm labor to urban manufacturing jobs is also the problem in this industry. Besides, the condition for the plant like air humidity, air temperature, air quality index, and soil moisture are not being recorded automatically which is more reason for the need of implementation system to monitor the data for future research and development of agriculture industry. As of this, we aim to provide a solution by developing IoT-based platform along with the irrigation for increasing crop quality and productivity in agriculture field. We aim to develop a smart garden system environment which the system is able to auto-monitoring the humidity and temperature of surroundings, air quality and soil moisture. The system also has the capability of automating the irrigation process by analyzing the moisture of soil and the climate condition (like raining). Besides, we aim to develop user-friendly system interface to monitor the data collected from the respective sensor. We adopt an open source hardware to implementation and evaluate this research.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.96-104
• /
• 2006

This paper presents design methodology, encient verification and implementation of a CAN protocol controller. The design methodology uses a heuristic technique to make the design flexible and cost effective. Using the design methodology, we created architecture for a CAN controller which has flexible and low cost features. For faster time-to-market and reliable operation of the designed CAN protocol controller, we p개posed a three-step verification process which uses three different kinds of verification techniques. The goal of this three-step verification is to reduce the number of test sequences in order to rapidly implement the design without loss of reliability for faster time-to-market. The designed CAN protocol controller was fabricated using a 0.35 micrometer CMOS technology.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.551-558
• /
• 2005

In this paper, we implement the fast handovers for mobile IPv6 (FMIPv6) on Linux system. Due to its dependency on operations in layer-2 (L2), we have added some functions into the network driver to generate triggers as the mobile node moves. We design and implement the FMIPv6 functions divided into two parts as an access router and a mobile node. We compare the packet loss and delay of the FMIPv6 implementation during the handover period with those of the MIPv6 and investigate the performance improvement.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.84-88
• /
• 2015

In this paper, we present that design and implementation of digital extreme-low-frequency (ELF) magnetic meter including wireless monitoring feature. In our lifetime, it is necessary to study how much magnetic field effects to human body. In this paper, we use 3-axis coil-type magnetic sensor, magnetic measurement range is 0.03~10uT and frequency range is 40~180Hz. As magnetic sensor characteristic, frequency loss is occurred that compensated using digital equalize based on DSP processor. Measurement value can be monitored on PC through Wifi communication and measurement error is observed within 6%.