• Title/Summary/Keyword: Implementation loss

Search Result 696, Processing Time 0.027 seconds

An Improved Soft Switching Two-transistor Forward Converter (개선된 소프트 스위칭 Two-transistor forward converter)

  • Kim, Marn-Go
    • Proceedings of the KIPE Conference
    • /
    • 2000.07a
    • /
    • pp.137-140
    • /
    • 2000
  • This paper proposes an improved soft switching two-transistor forward converter which uses a novel lossless snubber circuit to effectively control the turn-off dv/dt rate of the main transistors. In the proposed soft switching implementation the turn-off voltage traces across the main two transistors are almost the same contributing to reduce the total capacitive turn-on loss and the snubber current is divided into the two transistors resulting in distributed thermal stresses

  • PDF

Implementation of Policing Algorithm in ATM (ATM 망에서의 Policing Algorithm 구현)

  • Kwon, Jae-Woo;Choi, Myung-Ryul
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2001.04b
    • /
    • pp.1157-1160
    • /
    • 2001
  • 본 논문에서는 ATM 망에서 사용되고 있는 예방적 트래픽 제어 방법의 하나인, 사용 변수 제어(Usage Parameter Control)를 ATM 셀(Cell) 헤더(Header) 내에 있는 셀손실 우선 순위 정보(Cell Loss Priority Bit)를 기반으로 하는 개선된 UPC 알고리즘을 제안하고 그것을 구현하였다. 제안한 알고리즘은 우선순위가 높은 셀의 손실을 최소로 하고, 트래픽의 다중화 및 역다중화 과정에서 발생되는 트래픽의 군집성(Birstness of the traffic)을 해소할 수 있다는 장점을 갖고 있다.

  • PDF

Implementation of An 1.5Gbit/s Wireless Data Transmission System at 300GHz Band (300GHz 대역 1.5Gbit/s 무선 데이터 전송 시스템 구현)

  • Lee, Won-Hui;Chung, Tae-Jin
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.11 no.2
    • /
    • pp.1-6
    • /
    • 2011
  • In this paper, an 1.5Gbit/s wireless data transmission system using the carrier frequency of 300 GHz band was implemented. The RF front-end was composed of schottky diode sub-harmonic mixer, frequency tripler, and horn antennas for transmitter and receiver, respectively. The LO frequencies of sub-harmonic mixer are 150GHz for transmit chain and 156GHz for receive chain. The ASK(Amplitude Shift Keying) modulation was used in the transmitter and the envelope detection method was used in the heterodyne receiver. The conversion loss of sub-harmonic mixer and implementation system loss were measured to be 9.8dB and 1.2dB, respectively. The 1.5Gbit/s video signal with HD-SDI format was transmitted over wireless distance of 40cm without optical lens(4.2m with optical lens) and displayed on HDTV at the transmitted average output power of $20{\mu}W$.

Design and Implementation of the Hi인 Power Ka-band Waveguide Diplexer with an E-plane T-junction (고전력 전송이 가능한 Ka 대역 E-평면 T형 분기 도파관 다이플렉서의 설계 및 구현)

  • Yun So-Hyeun;Uhm Man-Seok;Yom In-Bok
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.7 s.98
    • /
    • pp.732-739
    • /
    • 2005
  • In this paper, the design and implementation of the Ka-band(20/30 GHz) waveguide diplexer with an E-plane T-junction are described. The waveguide diplexer consists of a transmit filter and a receive filter combined to the antenna port via an E-plane T-junction. The reason why the E-plane T-junction structure was selected is to reduce PIM(Passive Intermodulation) level as the split-plane is located in the low electrical current zone. The optimization was performed using the equivalent circuit so that the computation time might reduce. The structure of the diplexer was designed to handle high power and the multipaction analysis was performed. The multipaction margin was greater than 12 dB and satisfied with ESA/ESTEC recommendation. The manufactured diplexer shows minimum return loss of 22 dB, maximum insertion loss of 0.20 dB and maximum isolation of -40 dB for both transmitted receive bands. Those mean the analysis results of the waveguide diplexer were well agreed with the electrical performance test.

A Study on the Design and Implementation of SHF band Antenna for Digital Satellite Communication (디지털위성중계기용 SHF 대역 안테나 설계 및 구현에 대한 연구)

  • Kim, Ki-Jung;Han, Jun-Yong
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.11 no.1
    • /
    • pp.12-17
    • /
    • 2018
  • This study describes the design and implementation of Antenna for Digital Satellite Communication. The Antenna unit for SHF band consists of Reflector, Septom Polarizer, Feed Horn and Support Frame etc. Thought analysis of space environment before production, the possibility of the malfunction of equipment minimized and we designed a reliable Antenna through simulation for vibration and thermal analysis generated during the launch, and compared pre-simulation of main performance results to test results about main performances of Antenna after production. After fabricating the antenna, the maximum gain of the antenna main beam is 36.5dBi, which satisfies the requirement of 35dBi or more, and it also satisfies the requirement of -20dB for return loss of less than -24dB. Also, the isolation of the transmission and reception of the antenna is -22.6dB or less, which satisfies the requirement of -20dB or less. The antenna for digital satellite communication described in this paper can be used in the satellite field of geostationary earth orbit and low earth orbit requiring high reliability in the future.

An analysis of link margin for MB-OFDM UWB system in multi-path channel (다중 경로 채널에서의 MB-OFDM UWB 시스템 링크 마진 분석)

  • Shin, Cheol-Ho;Choi, Sang-Sung;Pack, Jeong-Ki
    • The KIPS Transactions:PartC
    • /
    • v.13C no.6 s.109
    • /
    • pp.677-684
    • /
    • 2006
  • This paper investigates the link margin of MB-OFDM UWB system quantitatively. Various simulations are performed considering the implementation loss by imperfect synchronization unit and the effect of multi-path fading channels. MB-OFDM UWB system uses ZP(Zero Padding) instead of CP(Cyclic Prefix) and supports two transmission modes; one is TFI(Time Frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. The advantage of if and TFI is to be able to increase the transmitting power effectively compared to the existed OFDM systems that transmit the signal continuously at the same average transmitting power. From the analysis results of Ink margin, to guarantee the service range of 4m in 200Mbps mode, TFI mode must necessarily be implemented and the service range of 480Mbps mode is estimated about 1-2m in the line-of-sight multi-path channel (CMI).

An Identification of Project Sites for Lowering Carbon Emissions and Saving Forests in DPR Korea (북한의 탄소저감과 산림보존을 위한 사업대상지 선정방법 연구)

  • Kim, Oh Seok;Youn, Yeo-Chang
    • Journal of the Korean Geographical Society
    • /
    • v.49 no.2
    • /
    • pp.264-274
    • /
    • 2014
  • The main purpose of the current research is to analyze DPR Korean carbon emissions due to forest loss and to identify potential project sites for REDD implementation. REDD (Reducing Emissions from Deforestation and forest Degradation) is a global environmental policy that is geared towards lowering carbon emissions in developing and least developed countries through saving forests that are vulnerable to future deforestation. DPR Korea is known for its underdevelopment as well as its serious environmental degradation, but limited research exists regarding these issues. The research employs remotely sensed global data and forest carbon stock information from the existing literature to quantify carbon emissions in DPR Korea. It turns out that the country may have had emitted about 82.6 to 149.3 $MtCO_2e$ due to forest loss between 2005 and 2009. A few administrative districts are delineated as prospective REDD sites, of which the outcomes of Local Moran's I represent high rates of deforestation. In brief, it appears there is a great possibility to lower carbon emissions in DPR Korea via REDD implementation.

  • PDF

Design and Implementation of Multi-Function Conversion Block for Microwave Receiver (마이크로웨이브 수신기용 다기능 주파수 변환 블록 설계 및 제작)

  • Kim, Jae-Hyun;Go, Min-Ho;Park, Hyo-Dal
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.7
    • /
    • pp.675-678
    • /
    • 2015
  • In this paper, we proposed a multi-function conversion block for microwave receiver. The proposed multi-function conversion block is composed of a broadband voltage controlled oscillator and a dual-mode mixer. Depending on whether the bias voltage is supplied, the first IF(Intermediate Frequency) output frequency(4,595 MHz/6,045 MHz) needed in microwave receiver is converted to 720 MHz and the another IF output frequency(720 MHz) for receiving Ku-band has the multi-functional operations of the dual mode that are bypass and attenuation without frequency conversion. Implementation and measurement results show that each intermediate frequency has conversion loss characteristic according to the LO power. The LO power conversion loss of 4,595 MHz at the LO levels from 2 dBm to 4 dBm is 13 dB, another of 6,035 MHz is 12 dB and the other of 720 MHz is 7.0 dB.

Implementation of Mobile IP using Pre-registration (사전 등록을 이용한 모바일 IP 설계 및 구현)

  • 박윤경;박승민
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2002.11a
    • /
    • pp.858-861
    • /
    • 2002
  • As mobile devices have become widely popular, users want to use devices not only wireless but also mobile. Mobile IP is used to support mobility on TCP/IP network. In mobile IP, when a terminal changes location, the terminal requests a registration to Home Agent through Foreign Agent in new location. After the request is accepted by Home Agent, the terminal can use network again. We call this process as handoff. In mobile n, handoff provokes loss of data packets and network delay. In this paper, we describe the implementation of pre-registration which is a solution of the handoff problems. Pre-registration improves the traditional handoff mechanism by requesting registration through current FA before location change. This muchanism can decrease packet loss and network delay.

  • PDF