• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.104-109
• /
• 2018

This paper presents a hardware design for the block encryption algorithm of ARIA which is used for standard in Korea. It presents a hardware-efficient design to increase the throughput for the ARIA algorithm using a high-speed pipeline architecture. We have used ROM for the S-box implementation. This approach aims to decrease the critical path delay of the encryption. In this paper, hardware was designed by VHDL, realized RTL level by Synplify which is synthesis tool and verified simulation by ModelSim. The ARIA algorithm is shown 68.3 MHz (Maximum operation frequency) to use Xilinx VertxE XCV Series device.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.133-139
• /
• 2017

Vehicles have increasingly evolved and become intelligent with convergence of information and communications technologies (ICT). Vehicle communications (VC) has become one of the major necessities for intelligent vehicles. However, VC suffers from serious security problems that hinder its commercialization. Hence, the IEEE 1609 Wireless Access Vehicular Environment (WAVE) protocol defines a security service for VC. This service includes Advanced Encryption Standard-Counter with CBC-MAC (AES-CCM) for data encryption in VC. A high-speed AES-CCM crypto module is necessary, because VC requires a fast communication rate between vehicles. In this study, we propose and implement an efficient AES-CCM hardware architecture for high-speed VC. First, we propose a 32-bit substitution table (S_Box) to reduce the AES module latency. Second, we employ key box register files to save key expansion results. Third, we save the input and processed data to internal register files for secure encryption and to secure data from external attacks. Finally, we design a parallel architecture for both cipher block chaining message authentication code (CBC-MAC) and the counter module in AES-CCM to improve performance. For implementation of the field programmable gate array (FPGA) hardware, we use a Xilinx Virtex-5 FPGA chip. The entire operation of the AES-CCM module is validated by timing simulations in Xilinx ISE at a speed of 166.2 MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.819-830
• /
• 1999

NAVTEX system is an international automated direct-printing service, broadcast on 5181kHz and 490kHz, for the promulgation of navigational and meteorological warnings and urgent information to ships. With our government's adoption of the international convention for SAR(Search and Rescue) in 1993, various trials for the installation of NAVTEX system have been executed by the government committee, relating laboratory and experts. An important consideration of the installation for NAVTEX system is the availability that could broadcast messages written in korean letter. Also, the receiver which can process the signal demodulated from the two frequencies, 518kHz and 490kHz, should be developed and supplied in domestic. In this paper, the code table and algorithm for conversions between NAVTEX characters and Korean Letters are studied, and signal processing techniques of code conversion are developed. Circuit design and implementation of the NAVTEX simulator using the Direct Digital Synthesizer are discussed, code conversion algorithm and signal processing technique of the NAVTEX transmission are programmed in its circuits. For evaluating the its functional characteristics, receiving module which has I-Q channel structure is designed. From the measurements of simulator, the characteristics show the frequency stability of the $(\pm)2Hz$ and Spurious free dynamic range is -63dBc. And the simulator can generate simultaneously wanted signal and several interfere signals. So, its capability is valuable for designers of the transmitting system and NAVTEX receiver, for provider as testing facilities of the type approval.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.64-68
• /
• 2005

Reed-Solomon code is one of the most versatile channel codes. The encoder can be implemented with two famous structures: ordinary and bit-serial. The ordinary encoder is generally known to be complex and fast, while the bit-serial encoder is simple and not so fast. However, it may not be true for a longer codeword length at least in VHDL implementation. In this letter, it is shown that, when the encoder is implemented with VHDL, the number of logic gates of the bit-serial encoder might be larger than that of the ordinary encoder if the dual basis conversion table has to be used. It is also shown that the encoding speeds of the two VHDL implemented encoders are exactly same.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.189-196
• /
• 1999

Until now, Many approach to use the layer or attribute items in GIS the classification results of remotely sensed images is going on, but It was rarely ever tried to use the results of fuzzy classification in GIS. The fuzzy classification can be accurate than any other classification methods of remotely sensed images and can separately extract the result for each classification items. In this study, We applied to GIS database implementation with fuzzy classification result. In the process of this study, We convert the fuzzy classification image into the grid of GIS database, and Membership Grade Value files transformed to table database into the GIS. And then Membership Grade Values related to each grid-cell of database be able to verify with pointer layer. Finally, we can use the fuzzy classification images in GIS database.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.44-57
• /
• 2016

Rectification is used as a preprocessing to reduce the computation complexity of disparity estimation. However, rectification also requires a complex computation. To minimize the computing complexity, rectification using a lookup-table (R-LUT) has been introduced. However, since, the R-LUT consumes large amount of memory, rectification with compressed LUT (R-CLUT) has been introduced. However, the more we reduce the memory consumption, the more we need decoding overhead. Therefore, we need to attain an acceptable trade-off between the size of LUT and decoding overhead. In this paper, we present such a trade-off by adaptively combining simple coding methods, such as differential coding, modified run-length coding (MRLE), and Huffman coding. Differential coding is applied to transform coordinate data into a differential form in order to further improve the coding efficiency along with Huffman coding for better stability and MRLE for better performance. Our experimental results verified that our coding scheme yields high performance with maintaining robustness. Our method showed about ranging from 1 % to 16 % lower average inverse of compression ratio than the existing methods. Moreover, we maintained low latency with tolerable hardware overhead for real-time implementation.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.29-41
• /
• 1998

This paper is for the design and implementation of SGML presentation system to format based on DSSSL (Document style semantics and specification Language). ISO proposed DSSSL as the technological standard for formatting and transforming SGML document. So, the body of this paper shows the design of this system in accordance with the model defined in DSSSL. This system, which is able to provide Korean, has Parsing function of arbitrary DTD, SGML document and DSSSL styles sheet, and contains a formatter that can manage various details, such as table, list, picture and others, as well as text.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.542-550
• /
• 2011

This paper describes the design and hardware implementation of a Single Input Fuzzy Logic Controller (SIFLC) to regulate the output voltage of a boost power converter. The proposed controller is derived from the signed distance method, which reduces a multi-input conventional Fuzzy Logic Controller (CFLC) to a single input FLC. This allows the rule table to be approximated to a one-dimensional piecewise linear control surface. A MATLAB simulation demonstrated that the performance of a boost converter is identical when subjected to the SIFLC or a CFLC. However, the SIFLC requires nearly an order of magnitude less time to execute its algorithm. Therefore the former can replace the latter with no significant degradation in performance. To validate the feasibility of the SIFLC, a 50W boost converter prototype is built. The SIFLC algorithm is implemented using an Altera FPGA. It was found that the SIFLC with asymmetrical membership functions exhibits an excellent response to load and input reference changes.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.914-922
• /
• 2017

Multilevel converters have attracted a lot of attention in recent years. The efficiency parameters of a multilevel converter such as the switching losses and total harmonic distortion (THD) mainly depend on the modulation strategy used to control the converter. Among all of the modulation techniques, the selective harmonic elimination (SHE) method is particularly suitable for high-power applications due to its low switching frequency and high quality output voltage. This paper proposes a new expression for the SHE problem in five-level converters. Based on this new expression, a simple analytical method is introduced to determine the feasible modulation index intervals and to calculate the exact value of the switching angles. For each selected harmonic, this method presents three-level or five-level waveforms according to the value of the modulation index. Furthermore, a flowchart is proposed for the real-time implementation of this analytical method, which can be performed by a simple processor and without the need of any lookup table. The performance of the proposed algorithm is evaluated with several simulation and experimental results for a single phase five-level diode-clamped inverter.

• Journal of Radiation Industry
• /
• v.8 no.3
• /
• pp.147-153
• /
• 2014

This paper describes a large area CMOS image sensor module Implementation using the precision align inspection program. This work is needed because wafer cutting system does not always have high precision. The program check more than 8 point of sensor edges and align sensors with moving table. The size of a $2{\times}1$ butted CMOS image sensor module which except for the size of PCB is $170mm{\times}170mm$. And the pixel size is $55{\mu}m{\times}55{\mu}m$ and the number of pixels is $3,072{\times}3,072$. The gap between the two CMOS image sensor module was arranged in less than one pixel size.