• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.71-78
• /
• 2002

This paper is concerned with the design and implementation of magnetic damper system to reduce the vibration of suspension system actively. Cylindrical type electro-magnetic actuator with permanent magnet is analyzed and effective controller design is made. Magnetic force analyzed and transfer function for the total system is determined by experimental data using error minimization method. For experiments, simple suspension structure system is utilized, in which a magnetic damper composed of permanent magnet and digital controller is attached. In order to drive the system, bipolar power amplifier of voltage control type is utilized. Stable and high speed control board is used to perform digital control logic for the given system. This paper shows that the magnetic damper system using phase-lead controller excellently reduces vibration of 1-D.O.F (degree of freedom) suspension system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1433-1445
• /
• 1994

In this paper, an coherent optical correlator system based on the off-axis projection synthetic discriminant funtion (OA-pSDF) was analyzed and implemented optically. The filter was synthesized by combining conventional pSDF with single reference plane wave multiplexing. Synthesized pSDF were transformed to binary phase only filters (BPOFs) and fabricated as computer generated holograms(CGHs), which was used in the real time optical correlator system instead of using expensive spatial light modulators(SLMs). From the characteristic test, it was found that OA-pSDF showed distortion invariance and good performances in discrminating subset images. The proposed OA-pSDF BPOF could overcome the limitations of conventional BPOFs : that is distortion variance such as acale and rotation, especially out of plane variance.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.32-39
• /
• 2009

Most mobile devices provide limited input interfaces in order to maximize the mobility and the portability. In this paper, the author proposes a small cubic-shaped tangible input interface which tracks the location, the direction, and the velocity using MEMS sensor technology to overcome the physical limitations of the poor input devices in mobile computing environments. As the preliminary phase for implementing the proposed tangible input interface, the prototype design and implementation methods are described in this paper. Various experiments such as menu manipulation, 3-dimensional contents control, and sensor data visualization have been performed in order to verify the validity of the proposed interface. The proposed tangible device enables direct and intuitive manipulation. It is obvious that the mobile computing will be more widespread and various kinds of new contents will emerge in near future. The proposed interface can be successfully employed for the new contents services that cannot be easily implemented because of the limitation of current input devices. It is also obvious that this kind of interface will be a critical component for future mobile communication environments. The proposed tangible interface will be further improved to be applied to various contents manipulation including 2D/3D games.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.114-116
• /
• 2005

Natural attenuation has been actively studied and often selected as final clean-up process in remediation of contaminated ground-water and soil for the last decade. Accordingly, understanding of natural processes affecting the fate and transport of contaminants in the subsurface becomes important for a success of implementation of the natural remediation strategy, Contaminant advection and diffusion processes in the unsaturated zone are naturally related to environmental changes in the atmosphere. The atmospheric pressure changes affecting the transport of contaminants in the subsurface are investigated in this study. Moisture content, trichloroethylene (TCE) concentration, temperature, and pressure variations in the subsurface were measured for the July, August, November, and December 2001 at Picatinny Arsenal, New Jersey. These data were used for a one-phase flow and one-component transport model in simulating the soil-gas flow and accordingly the TCE transport in the subsurface in accordance with the atmosphere pressure variations at the surface. The soil-gas velocities during the sampling periods varied with a magnitude of $10^{-6}\;to\;10^{-7}\;m\;s^{-1}$ at land surface. The TCE advection fluxes at land surface were several orders of magnitude smaller than the TCE diffusion fluxes. A sensitivy analysis indicated that advection fluxes were more sensitive to changes in geo-environmental conditions compared to diffusion fluxes. Of all the parameters investigated in this study, moisture content has the most significant effect on TCE advection and diffusion fluxes.

• Journal of Sensor Science and Technology
• /
• v.12 no.4
• /
• pp.185-190
• /
• 2003

Recently, sensors which use the infrared light, supersonic waves, and electromagnetic waves have been used for many applications to detect information of the object. For these sensors, the accompanying system which utilizes the sensor should be systematically developed. In this paper, a general microwave radar sensor system is briefly described, and then basic applications of a CW doppler radar sensor system are introduced. For the CW doppler radar sensor applications, a highly-stable, low-cost Dielectric Resonator Oscillator (DRO) has also been designed and implemented, which can be used for commercial microwave sensor systems. The implemented DRO has output power of +5.33 dBm at 12.67 GHz and phase noise of -108.5 dBc/Hz at the 100 kHz offset frequency.

• Journal of Internet Computing and Services
• /
• v.15 no.4
• /
• pp.135-140
• /
• 2014

In this paper, we present a development process model for mobile applications. It consists of five development phases including requirements analysis, architecture design, navigation design, page design, and implementation and testing phase. It provides a design method with diagrams. Our development method helps program developers define functional requirements and design applications architecture and functional flow. Through our method, they can reduce their applications development time and effort. We applied our method to developing a mobile application, and then presented the diagramming products as the result of performing development phases.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.169-175
• /
• 2014

NG-SDH system is connected with networks throughout optical fibers. Network synchronization controller is a necessary for the data synchronization in each optical transmission system. In this paper, we have design and implementation the network synchronization controller using SOPC(system on a programmable chip) design technic. For this network synchronization controller we use FPGA in Altera. FPGA includes 32bit CPU, DPRAM(dual port ram), digital input/output port, transmitter and receiver framer, phase difference detector. We also confirm that designed network synchronization controller satisfies the ITU-T G.813 timing requirements.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.48-53
• /
• 2001

A three-stage low noise amplifier(LNA) for the Base-station of the IMT-2000 is designed and implemented. In the first stage, a GaAs HJt-FET which has good noise characteristics is made use of. Monolithic microwave integrated circuits(MMICS) are used in the second and the third stage to achieve both the high gain and high output power. Although the balanced amplifier is used to reduce the input VSWR, it is done only in the first stage because we have to minimize the noise figure attributed to the phase difference of the balanced amplifier. It is shown that the implemented LNA has the gai over 39.74dB, the gain flatness less than ±0.4dB, the noise figure below 0.97dB, input and output VSWRs less than 1.2, and OIP₃(output third order intercept point) of 38.17dBm in the operating frequency range.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.719-720
• /
• 2006

In the mechanical system, optimization of motion control is very essential in the aspect of automation technique progress. In the servo system, the function of controller is very important but most of the controllers have played only the role of pulse generator because the controller with main function is very expensive. In this thesis, the system was composed of PC, commonly used driver AC servo motor and a produced control board. The PC transmit a gain, a locus data to a driver and controller. At the same time, it converts imformation from the controller and convert them into data and offer an output with graph. The role of a controller is to trasmit a locus data to a driver and counting the pulse on the phase of an encoder to the PC. We have performed the experiment in order to confirm with variable PID parameter capable of the optimization of gain tuning with the counting of feedback control sensor signal with regard to the external interface into the system, such as torque. Based on the experiment result, we have confirmed as follows: First, it was confirmed that we could easily input control factors P.I Gain, constant $K_P,\;K_I$ into PC. Second, not only pulse generator function was possible, but with this pulse it was also possible to count using software with PIC chip. And third, using the multi-purpose PIC micro chip, simple operation and the formation of small size AC Servo Controller was possible.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1124-1126
• /
• 1997

The Unified Power Flow Controller(UPFC) with a series inverter and a shunt inverter ia able to control all three line Parameters(voltage, impedance and phase angle) and so UPFC technology has the potential to enhance the implementation and broad application of the FACTS concept with improved Performance. In this Paper, the UPFC is applied in order to improve the power flow oscillation damping. The modal performance measure is minimized in order to determine the optimal parameters of UPFC controller for damping Power flow oscillations. The dynamics of the injected voltage of UPFC is represented as a first order delay element. The UPFC controller used here is of the PIO type and the input signal to the controller is the active power flow through the UPFC. The effect of UPFC application to the Power system are analyzed from the stand point of power system oscillation damping.