• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.144-146
• /
• 2018

In order to meet the harmonics standards such as IEEE 519 and P1547 the output quality of a grid connected inverter should satisfy a certain level of Total Harmonic Distortion (THD) value. However, the output quality of an inverter gets degraded due to the grid voltage harmonics, the dead time effects and the nonlinearity of the switches, which all contributes to a higher THD value of the output. In order to meet the required THD value for the inverter output under the distorted grid condition the use of harmonic controller is essential. In this paper a novel feedforward harmonic compensation method is proposed in order to effectively eliminate the low order harmonics in the inverter current to the grid. In the proposed method, unlike the conventional harmonic control methods, the hamonic components are directly compensated by the feedforward terms generated by the PR controller with the grid current in the stationary frame. The proposed method is simple in implementation but powerful in eliminating the harmonics from the output. The effectiveness of proposed method is verified through the PSIM simulation and the experiments with a 5kW single phase grid connected inverter.

• 대한전자공학회논문지SP
• /
• 제46권2호
• /
• pp.108-113
• /
• 2009

FIR upsampler는 입력 데이터 보다 L배 빠른 출력 신호를 생성한다. Upsampler의 효율적인 구현을 위해 일반적으로 Noble identity 공식을 이용하여 L개로 필터단을 나눈다. 본 논문에서는 나누어진 필터단 1개의 위상 지연을 정수로 만들어 필터단 1개를 제거하는 방법을 제안하였다. 제안한 방법을 이용하여 CDtoDAT에 이용되는 192탭 2배 upsampler를 하이닉스 0.18라이브러리를 이용하여 설계할 때 기존 회로에 비하여 면적, 파워, 최대위상지연에러, 최대리플에러에서 48%, 43%, 99.9%, 68% 만큼 효율적임을 확인하였다.

• 한국통신학회논문지
• /
• 제24권9B호
• /
• pp.1683-1689
• /
• 1999

VCO의 표류성분 제거기와 빗쌀 하모닉 발생기를 이용하여 주파수를 상향 변환하면서 동시에 주파수 대역폭을 확장하는 시스템을 구현하였다. 출력 주파수 범위가 220∼280MHz, 분해능이 5MHz인 저주파수 합성기의 출력을 1660∼2140MHz의 광대역 주파수로 확장한다. 최종출력의 위상 잡음 상태는 저주파수 합성기와 빗쌀 하모닉 발생기에 의해 결정되며 VCO의 표류성분은 최종 출력에 나타나지 않는다. 필터 뱅커처럼 VCO의 조절로 주파수가 60MHz의 단위로 가변되는데 이때의 가변시간은 3usec이하이며, 스퓨리어스는 -55dBc이하이다. VCO의 출력 주파수 범위를 확장하면 쉽게 출력 대역폭을 추가로 확장할 수 있으며, 빠른 스위칭 시간을 요구하는 광대역 초고주파 합성기에 응용될 수 있다.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.216-226
• /
• 2015

Grid synchronization is one of the key techniques for the grid-connected power converters used in distributed power generation systems. In order to achieve fast and accurate grid synchronization, a new phase locked loop (PLL) is proposed on the basis of the complex filter matrixes (CFM) orthogonal signal generator (OSG) crossing-decoupling method. By combining first-order complex filters with relation matrixes of positive and negative sequence voltage components, the OSG is designed to extract specific frequency orthogonal signals. Then, the OSG mathematical model is built in the frequency-domain and time-domain to analyze the spectral characteristics. Moreover, a crossing-decoupling method is suggested to decouple the fundamental voltage. From the eigenvalue analysis point of view, the stability and dynamic performance of the new PLL method is evaluated. Meanwhile, the digital implementation method is also provided. Finally, the effectiveness of the proposed method is verified by experiments under unbalanced and distorted grid voltage conditions.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.69-79
• /
• 2013

A system of tracking a vehicle collects the vehicle location and then transmits the data into a GIS server in order to provide several service areas. An ODU built in the vehicle savesa GPS information data and communicates with the RSU installed in the road over the wave technology. The collected data in RSU is transmitted into the GIS serverand is stored. The system based on the collected GPS data in each vehicle is providing useful and various services between RSU and OBU. In this paper indicates that the system is designed in 2 phasesbased on the collected GPS data. The result comparing to process of GPS data created in 1 phase and 2 phase over the Web GIS service indicates that the capability of process of the GPS data in 2 phase is enhanced in "50.88% ~ 51.81%". Therefore, when the accident is happened the system of tracking the vehicle over GPS tech not only receives the information properly but also provides the emergence rescue services.

• 전력전자학회논문지
• /
• 제12권1호
• /
• pp.74-80
• /
• 2007

본 논문에서는 2상 여자 방식으로 구동하는 전압형 인버터 스위치에 발생한 개방 고장을 검출하는 기법을 제안한다. 제안된 기법은 인버터 각 상의 하단 스위치에 전압 센서를 사용하여 동작 모드에 따라 개방 고장을 판별한다. 이는 구현이 간단하고 빠른 고장 판별이 가능하며 부하의 영향을 거의 받지 않기 때문에, 시스템의 신뢰성을 향상시킨다. 또한 4-스위치 인버터 구동을 적용한 재구성을 통하여 고장 발생시에도 고장의 영향을 최소화 하면서 연속적인 운전을 가능하게 했다. 제안된 고장 검출 알고리즘의 타당성은 실험결과로 검증한다.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.956-966
• /
• 1997

단일 스테이지 스위칭 구조를 갖는 홀로그래픽 크로스바에 의한 동적인 자유공간 광연결을 실험하였다. 동적인 동작을 위해 전기적인 주소지정방식의 액정 공간광변조기와 회절격자가 매트릭스-매트릭스 크로스바에서의 고정적인 홀로그램을 대신하여 사용되었다. 회절격자는 규칙적인 셀들로 이루어졌으며 각 셀마다 서로 다른 위상지연 정도를 갖는다. 이러한 화소형 위상격자 배열을 공간광변조기에 띄어 입력빔의 방향으로 편향시키거나 여러 빔으로 분리한 후 원하는 위치로 빔의 방향을 조종한다. 이러한 실험결과 컴퓨터와 공간광변조기, 위상형 회절격자를 이용하여 자유공간 광연결이 동적으로 수행됨을 보였다.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1563-1576
• /
• 2017

This paper presents a novel switching pattern current control (SP-CC) scheme, which is applied in three-phase voltage-source converters (VSCs). This scheme can select the optimal output switching pattern (SP) by referring the basic principle of space vector modulation (SVM). Moreover, SP-CC is a method without a carrier wave. Thus, the implementation process is concise and easy. When compared with the conventional hysteresis current control (C-HCC) and the space vector-based hysteresis current control (SV-HCC), the SP-CC has the performances of faster dynamic response of C-HCC and less switching number (SN) of SV-HCC. In addition, it has less harmonic contents in the three-phase current, along with a lower switching loss and a higher efficiency. Moreover, the hysteresis bandwidth and Clarke conversion are not required in the SP-CC. The effectiveness of the presented SP-CC is verified by simulation and experimental test results. In addition, the advantages of the SP-CC, when compared with the C-HCC and SV-HCC, are verified as well.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1177-1182
• /
• 2018

UCC3895 드라이버를 이용하여 위상천이방식의 100Mhz로 운용되는 500W급 영전압스위칭(Zero voltage switching) DC/DC 컨버터를 설계하였다. UCC3895 드라이버의 데드타임은 풀브리지의 리딩래그와 레깅래그가 별도로 구동 가능하도록 설계되어 있어 두 래그간에 데드타임을 별도로 부여하는 것이 가능하며, 이것은 두 래그간에 비대칭관계인 데드타임으로 영전압스위칭의 구현을 가능하게 하였다. 또한 본 논문에서는 안정된 출력전압을 위한 부귀환회로 설계방식이 제안되었다. 시제품의 최대 효율은 $500{\Omega}$의 부하에서 95.5% 정도를 나타냈다.

• 한국보육지원학회지
• /
• 제15권4호
• /
• pp.83-113
• /
• 2019

Objective: The purpose of this study was to examine the experiences of mothers who participated in the training of consultants for the purposes building an early childhood educational community. Methods: Participants were 14 mothers in the first phase, 10 mothers in the second phase, and 8 mothers in the third phase. Data were collected from stories shared during the learning community activities. The mothers' experiences were analyzed according to qualitative analysis procedures. Results: Mothers' experiences of participating in the training of consultant for building early childhood educational community were categorized into three themes and seven sub-themes. The first theme was "self as a parent" including "looking inside myself in the parent-child relationships" and "looking inside myself in the relations with other mothers". The second theme was "self as a member of the community" which consisted of "sharing emotions through ritual", "forming communitarian identity through hospitality and solidarity" and "growing as a social mother". The third theme was "self as a educational community consultant" out of which emerged "setting up shared visions", "building practical community competence", and "creating fields of community implementation". Conclusion: The results suggested there are implications for the effective practices of building an early childhood education community and the direction and methodology of parent education.