• Korean Security Journal
• /
• no.44
• /
• pp.251-278
• /
• 2015

Registered security guards carry out police duties as civilian police who are in charge of security service, and so they have a two-fold status: a civilian in terms of a social standing and a policeman in the way that they execute the authority of security. The problem caused by this legal position is that their legal rights and obligation can be unclear in the task-action and working relationship. This paper attempts to study their functions, rights, and legal duties through the interpretation of the related positive law so as to reveal the problems that may spring from this ambiguous status of registered security guards. This endeavor illuminates their legal status specified in the positive law in and around the Act on the police assigned for special guard, observing their functions and the legal duties in the pursuit of their tasks, and ending up pointing out the problems of the positive law. As a result of research work, the most significant problems, even if multifarious, are the avoidance of the state reparation in the responsibility for the illegal behavior in connection with their operation; the unconstitutionality of the disciplinary punishment regulation originated from the entrust with full powers; the imperfection of the rules about the cooperative ties with the police; the possibility of human rights abuse caused by the ban on the labor dispute; the equality problems from the dual pay system; and the inadequacy of the codes about the recruitment qualification and method. This research is intended to help achieve the purpose of the security of national critical facilities through the smooth execute of duties as well as the protection of the guards' rights. Besides, the key focuses posed in this paper are worthy of being developed more accurately through the following researches.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.2
• /
• pp.217-231
• /
• 2012

The flexural behavior of HSB I-girder with a non-slender web attributed to inelastic lateral-torsional buckling under uniform bending was investigated using nonlinear finite element analysis of ABAQUS. The girder was assumed to have a compact or noncompact web in order to prevent premature bend-buckling of the web. The unbraced length of the girder was selected so that inelastic lateral-torsional buckling governs the ultimate flexural strength. The compression flange was also assumed to be either compact or noncompact to prevent local buckling of the elastic flange. Both homogeneous sections fabricated from HSB600 or HSB800 steel and hybrid sections with HSB800 flanges and SM570-TMC web were considered. In the FE analysis, the flanges and web of I-girder were modeled as thin shell elements. Initial imperfections and residual stresses were imposed on the FE model. An elasto-plastic strain hardening material was assumed for steel. After establishing the validity of the present FE analysis by comparing FE results with test results in existing literature, the effects of initial imperfection and residual stress on the inelastic lateral-torsional buckling behavior were analyzed. Finite element analysis results for 96 sections demonstrated that the current inelastic strength equations for the compression flange in AASHTO LTFD can be applied to predict the inelastic lateral torsional buckling strength of homogeneous and hybrid HSB I-girders with a non-slender web.

• Journal of Families and Better Life
• /
• v.25 no.3 s.87
• /
• pp.119-135
• /
• 2007

The purpose of this study is to find out the level of digital stress that people experience and to investigate the effects of socio-economic variables on that. To collect data, structured questionnaire was developed and 1,200 questionnaires were distributed through internet. There were 2 dimensions in this study to examine digital stress. First dimension was about the devices themselves: computers and the other digital goods. Second dimension was about the time digital stress occurring in consumers' decision-making process: purchasing and using. Based on Yeo&Kim(2004), sub-dimensions of purchasing and using aspects were chosen. 5 sub-dimensions in purchasing side were new technology, cost, variety of alternatives, warranty service, and informational problem 6 sub-dimensions in using field were mal(or impaired)-functioning. physical aspects, immaturity in use, pressure to use, addiction to use, and informational problem. As independent variables, sex, age, educational level, digitalization acceptability and computer usability were used. The overall level of digital stress was around the average point which was not as high as expected. Digital stress of purchasing was higher than that of using. First, in purchasing aspects, the level of digital stress was relatively high in cost, variety of alternatives and warranty service. Hence, clear communications with consumers about the distinctive aspects and cost of digital devices in market are needed. Secondly, in using side, mal-functioning and physical aspects were relatively more powerful stressors. In the other words, the more serious problems were not from the characteristics of individual consumers but from those of products. Producers should put their best efforts to reduce imperfection (defectiveness) and develop user-friendly digital devices. Also, users' individual efforts to overcome the problems that can be solved privately are necessary. Finally, it was discovered that sex and computer usability were very important variables on digital stress. To extend computer usability of consumers and get over digital illiteracy, it is essential to expand the paths to give chances for people to contact with computers and other digital goods. Still there are lots of people whore computer-illiterate or low-skilled at computers. In policies or educational programs made by government, communities, or schools, more attention should be paid to the digitally vulnerable groups.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.271-282
• /
• 2008

Specific joint devices composed of end-plates and through bolts are under development to assemble steel beams to PC columns efficiently by dry construction method for the PCS structural system, of which major structural components are precast concrete columns and steel beams. Seismic performance of the joint devices had been evaluated by experimental tests in the previous studies and it was showed that all the performance requirements regarding to strength deterioration, stiffness degradation and energy dissipation capacity were satisfied to the criteria of ACI requirements, but the initial stiffness was not. In order to find out possible causes of the insufficient rigidity of the joint devices and provide the proper measures to improve the performance of the joint accordingly, numerical analyses were carried out by using ABAQUS. Parameters, such as thickness of neoprene pad, conditions of surface between PC column and end-plate, magnitude of pretension forces of through bolts, stiffness of end-plate were taken into consideration. As the result, it was found that the rigidity of the PCS system was negatively affected by the magnitude of initial gaps between PC columns and end-plates, and insufficient stiffness of neoprene fillers and end plates. In order to improve the initial stiffness performance of the joints, measures such as increase of the magnitude of pretension forces on through bolts and increase of the stiffness of end-plate by reducing the bolt pitch and providing adequate stiffeners are recommended.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.3 s.13
• /
• pp.65-75
• /
• 2004

A shell structure, having a curvature with a curved surface, is an extremely efficient mechanical creation regard to the external load. A basic structural resistance mechanism is the structural system, which is resisted the out-of-plane direction load by in-plane forces using the structure's curvature. Therefore, it has a merit to make thin and lightweight large spacial structures using minimum materials. Among the large spare structural system, the rapid development of the membrane structures, cable structures and the hybrid structures are watched recently. But, this kind of structural system shows the unstable phenomenon by snap-through or bifurcation according to the shape of structure, and the understanding of the collapse mechanism by this phenomenon is very important to the design process. In this study, I investigated the unstable characteristics of the Geiger-type, Zetlin-type and flower-type hybrid cable dome structures, which is the lightweight hybrid structures using compression and tension elements continuously, according to the difference of structural system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1265-1273
• /
• 1999

PIV(Particle Image Velocimetry) velocity field measurements inside the snout of a1/10 scale model of the Zn plating process were carried out at the strip speed $V_s=1.5m/s$. Aluminum powder particles ($1{\mu}m$) and atomized olive oil ($3{\mu}m$) were used as seeding particles to simulate the molten Zinc flow and deoxidization gas flow, respectively. A pulsed Nd:Yag laser and a $2K{\times}2K$ high-resolution CCD camera were synchronized for the PIV velocity field measurement. From flow visualization study, it is found that the liquid flow in the Zn pot is dominantly governed by the uprising flow caused by the rotating sink roll, with its effect on the steel strip inside the snout largely diminished by installing of the snout. The deoxidization gas flow in front of the strip inside the snout can be characterized by a large-scale vortex rotating clockwise direction formed by the moving strip. In the rear side of the strip, a counter-clockwise vortex is formed and some of the flow entrained by the moving strip impinges on the free surface of molten zinc. The liquid flow in front of the strip is governed by the flow entering the snout, caused by the spinning sink roll. Just below the free surface a counter-clockwise vortex is formed near the snout wall. The moving strip affects dominantly the flow behind the strip inside the snout, and large amount of the liquid flow follows the moving strip toward the sink roll. The thickness of the flow following the strip is very thin in the front side due to the uprising flow, however thick boundary layer is formed in the rear side of the strip. Its thickness is increased as moving downstream toward the sink roll. Inside the snout, the deoxidization gas flow above the free surface is much faster than the liquid flow in the zinc pot. Due to the larger influx of the flow following the moving strip in the rear side of the strip, higher percentage of imperfection can be anticipated on the rear surface of the strip.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.2
• /
• pp.91-103
• /
• 2014

High performance steel for bridges(HSB 800) with a minimum tensile stress of 800MPa was recently developed. However, the study for local buckling behavior of plate girders considering interactive effects of flanges and webs is still insufficient. In this study, the flange local buckling(FLB) strength of plate girders with HSB 800 was evaluated by nonlinear finite element analysis. The flanges and webs of plate girders having I-section were modeled as 3D shell elements in the nonlinear analysis. Initial imperfection and residual stress were imposed on the plate girder. The high performance steel was modeled as a multi-linear material. Thus, parametric study of compression flanges with a compact, noncompact and slender web was performed. The flange local buckling behavior of plate girders was analyzed, and the nonlinear analysis results were compared with the nominal flexural strength of both AASHTO LRFD(2012) and KHBDC LSD(2012) codes.

• The Research Journal of the Costume Culture
• /
• v.9 no.6
• /
• pp.893-907
• /
• 2001

The main purpose is to study the effects of princess lines on different body types and to disguise any imperfection by using diverse princess lines. We separated testers body shapes into specific body types, H, Y by applying both the direct and the indirect measurements. These designs were evaluated by using the point ranking system method, and then average scores were obtained from these evaluations. Following are the results of the study: 1 These are the resulting illusion effects when the shoulder width of the Princess line was fixed. When the Princess line originated from 1/3 point of the armhole, body types Y appeared to show narrow waist width. A-line silhouette appeared to display the narrowest shoulder width. When the Princess line originated from 2/3 point of the armhole, body types H and Y appeared to exhibit narrowest waist widths, and the A-line silhouette once again displayed the narrowest shoulder width. When the Princess line originated from 1/2 point of the armhole, body type H appeared to exhibit narrow width; and H-line silhouette displayed the narrowest shoulder width 2. When the Princess lines waist w'4th was fixed in order to study illusion effects of waist widths. In this experiment, locations of Princess lines and widths of the skirt were varied. When the waist width was fixed at 6.5 cm, For the H body type, the Princess line location of 1/3 point of the armhole in H-line silhouette design exhibited the narrowest waist width. For the Y body type in A-line silhouette design, the Princess line locations of 1/3 and 1/2 points of the armhole exhibited the narrowest waist width because it displayed the hourglass effect. When the waist width was fixed at 10 cm, H body type did not exhibit any significant differences between designs. For Y body type, A-line silhouette design with the Princess line origination point at 1/3 down the armhole exhibited the narrowest waist width. 3. The illusion effects of the hip were studied by fixating the width of the skirt and varying the locations of Princess line and waist widths. In H-line skirt silhouette designs, all two body types exhibited narrow hips when the Princess line origination points were at 1/3 and 1/2 way down the armhole. For A-line skirt silhouette, H body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/2 point in the shoulder was shown. Y body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/3 point of the armhole and 2/3 point of the shoulder. 4. With both waist and skirt widths fixed, all two body types exhibited taller and slender postures when the Princess line originated from the shoulder compare to the armhole.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.126-135
• /
• 2012

This study is the subsequent full-scale research of a TV drama writer who has been out of scholarly pursuits as it explores Su-Hyeon Kim's underlying consciousness with focusing on her heroines, the and . The author Su-Hyeon Kim clearly distinguishes a TV melodrama from a TV home-drama by her own self-control, which is a rare case in TV drama genres, therefore, her consciousness lights up at her melodrama. This study applies Lacanian theory to the author's melodramas for examining the author's under-lying thought. For Lacan the subject is an 'alienated', 'privative', 'fractured' 'being' as an imperfect language, the symbolic order, forms the subject through its signification. The subject desires the other's desire, and wants to become an object for the other's desire. The desire constantly demands an integral world, a perfect love, the wholly harmonious imaginary order. And it lasts up as it refuses the symbolic order's imperfection while it works its unconscious fantasy. Lacan states that only the 'traversing the fantasy', 'separation' would give birth to the real, liberated subject. Despite a 20-years of rift within two works, the and have an identical conflict core, that is a subject's constitutive, fundamental privation and desire of a human being. Su-Hyeon Kim's underlying consciousness complies with her continued theses of an inquiry into the subject's real liberation and freedom when desire of the rings produces the subject's alienation, privation, and the pursuit of a impossible perfect love.

• Korean Journal of Childcare and Education
• /
• v.10 no.6
• /
• pp.291-311
• /
• 2014

This research is to understand young children ontologically by examining features of young children in the picture books for the early childhood. For the purpose, under the consultation with a picture book specialist and three level process of selection, 4 picture books were chosen as analytic objects. The study questions is as follows. What is ontological understandings on young children throughout picture books for the early childhood? Under this purpose the books chosen were John Burningham's , David Wiesner's , Hina Back's , Peter Sis's . The books went through dramaturgical coding and were thematised based on the theories of ontological phenomenology. Study results show that young child-being appearing in the picture-books are thematised as 'multi layered being with Ntwurf and Geworfenheit(Aldo)', 'responsible being risen above greed(Plotsam)', 'reflective being on face of others(Fairy of Jangsutang)', 'being who encourages educational response of adults.(Madlenka's Dog)' These results revealed that young child-being have features not different from (multi layered aspect of being), unique from(encouraging educational response), and beyond adult-being(responsibility and response towards others). Despite several limitations, this study helped understand the young children ontologically by revealing that they, not only as developmental beings with imperfection, dependence, and immaturity but as multi layered and requesting, responsible being, having the same features as adults and, at times, rise above adult-being.