• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.139-140
• /
• 2014

The purpose of this study in to evaluate relationship between mechanical properties of materials and fiber type by reinforced fiber with high-velocity impact fracture behavior of fiber reinforced concrete. As a result, for fracture behavior by high-velocity impact, it is considered that impact fracture behavior is not affected by static mechanical properties directly but affected by fiber type and density of the number of fiber. It is necessary to consider type, shape, mechanical properties and the number of fiber with flexural and tensile performance for the evaluation on impact resistance performance of fiber reinforced concrete.

• 폴리머
• /
• 제26권2호
• /
• pp.237-244
• /
• 2002

본 논문은 폴리카보네이트 (PC)/폴리부틸렌 테레프탈레이트 (PBT)/충격보강제 (IM) 블렌드에서 PC와 PBT의 조성비에 따른 기계적 성질 및 유동 특성을 조사하였다. 부타디엔계 IM과 부틸아크릴레이트계 IM을 사용하여 각각의 함량에 따른 상온에서의 기계적 물성의 변화와 저온에서의 충격강도를 관찰하였다. 블렌드의 내화학성을 살펴보기 위해 PC/PBT/IM 블렌드를 유기용제인 신너에 침지시킨 후 기계적 물성의 변화를 분석하였다. 블렌드에 PC 함량이 많아질수록 인장 및 굴곡강도가 선형적으로 증가하였고 열변형 온도 역시 증가하였다. 충격강도는 PC의 함량이 약 50 wt% 일 때까지 급격히 증가하며 그 이상의 함량에서는 일정하게 유지되었다. 유동성은 PC함량이 증가할수록 감소하였다. IM의 종류에 따라서 충격특성이 다르게 관찰되었는데, 부틸 아크릴레이트계 IM은 $0^{\circ}C$ 이상의 온도에서 부타디엔계 IM보다 충격강도가 다소 높게 나타났으나 $0^{\circ}C$ 미만에서는 충격강도가 현저하게 낮아졌다. 내화학성 실험에서는 블렌드에서 PC의 함량이 많을수록 인장 및 굴곡강도가 감소하는 반면 충격강도는 증가하였다. 이는 유기용제에 약한 PC가 연화되면서 나타나는 현상이라 사료된다.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.660-665
• /
• 2006

The mechanical properties of $Al_2O_3$-SiC composites manufactured with adding various amount and size of SiC particles have been measured and analyzed. Generally, the elastic modulus of the composites shows about 50% less than that of PL-8 (45 wt% $Al_2O_3$-51 wt% $SiO_2$-4 wt% other oxides), but the flexural strength is similar with each other. The impact resistance property of $Al_2O_3$-SiC composite against high velocity copper jet was lower than that of PL-8 when SiC particles of approximately 3 $\mu$m diameter was added to. It is caused probably due to the micro-pores made by oxidation of SiC particles. However, in the case of the less-weighted $Al_2O_3$-SiC composite adding to 10 wt% SiC with average diameter of 10 $\mu$m and sintering at 1200$^{\circ}C$, the impact resistance property was improved up to 37 percent compared with that of PL-8.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.79-80
• /
• 2017

This study examined the effect that the amorphous metallic fibers had on the static mechanical properties and the impact resistance of cement composites to those of hooked steel fibers. The hooked steel fiber exhibited pull-out from the matrix after the peak flexural stress was attained, while the amorphous metallic fiber was not pulled out from the matrix, but was instead cut off. In terms of impact resistance, the amorphous metallic fiber reinforced cement composite was found to be more effective at resisting cracking than the hooked steel fiber reinforced cement composite. Therefore, amorphous metallic fiber should be used in fiber reinforced cement composite materials, and for structural materials, and for protection panels.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.150-154
• /
• 1995

The purpose of this study is to evalute the mechanical and the anti-corrosion characteristics of cementitious, organic coatings on steel plates. Tests are performed according to KS M 5331, 5250, etc'. For the test, we used water based epoxy, Tar epoxy, the red lead, and cementitious anti-corrosion coatings. The results of adhension tests satisfying the requirements in relevant standards The impact test shown that the impact test shown that the impact resistance of cementitious anti-corrosion test, rred lead, epoxy, cementitiouse show good corrosion resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1115-1120
• /
• 2000

The purpose of this study is to investigate toughening of unsaturated polyester resin by addition of liquid rubber. In general, unsaturated polyester liquid has strong brittleness in spite of if high strength Therefore; it is difficult use polyurethane liquid rubber for the place where impact resistance is demanded. In this study, it was evaluated strength, impact resistance and fracture toughness by adding to polyurethane liquid rubber(0~25%). As a result, it was found that a tendency to be increase bearing impact and fracture toughness as polyurethane liquid rubber increased but strength was decreased.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.583-592
• /
• 2018

Today, buildings are exposed to the effects such as explosion and impact loads. Usually, explosion and impact loads that act on the buildings such as nuclear power plants, airports, defense industry and military facilities, can occur occasionally on the normal buildings because of some reasons like drop weight impacts, natural gas system explosions, and terrorist attacks. Therefore, it has become important to examine the behavior of reinforced concrete (RC) structures under impact loading. Development of computational mechanics has facilitated the modeling of such load conditions. In this study, three kinds of RC walls that have different geometric forms (square, ellipse, and circle) and used in guardhouses with same usage area were modeled with Abaqus finite element software. The three configurations were subjected to the same impact energy to determine the geometric form that gives the best behavior under the impact loading. As a result of the analyses, the transverse impact forces and failure modes of RC walls under impact loading were obtained. Circular formed (CF) reinforced concrete wall which has same impact resistance in each direction had more advantages. Nonetheless, in the case of the impact loading occurring in the major axis direction of the ellipse (EF-1), the elliptical formed reinforced concrete wall has higher impact resistance.

• Structural Engineering and Mechanics
• /
• 제56권2호
• /
• pp.157-167
• /
• 2015

The impact behavior of epoxy-based nanocomposites reinforced with carbon nano tube (CNT), carbon nano fiber (CNF) and mixed contents of these nanoparticles was investigated using Izod impact test. The results showed that while the impact strength of nanocomposites containing 1 wt% of CNT and 1 wt% of CNF increased 19% and 13% respectively, addition of mixed contents of these nanofillers (0.5-0.5 wt%) demonstrated higher improvement (21%) in the impact resistance. The trend of the results is explained on the basis of different fracture mechanisms of nanocomposites. Furthermore, the fracture surface of specimens and the dispersion state of nanoenhancers have been studied using scanning electron microscopy (SEM) photographs.

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.737-744
• /
• 2021

In this study, structural health monitoring (SHM) methods of carbon fiber reinforced plastics (CFRPs) were investigated using electrical resistance. The developed sensing technique monitored electrical resistance in accordance with the impact damage of a CFRP. The changes in electrical resistances with multiple electrode sets enabled SHM without extra sensors so that this technique can be called self-sensing. Moreover, this study proposed electrodes only at peripheral side of a structure to minimize the number of electrodes compared to those in an array which has square number of sensors as the sensing area increases. For the intensive investigation, electromechanical sensitivity in terms of electrode distance was analyzed and optimized under drop weight impact testing. Then, SHM methods with electrodes in an array and electrodes in peripheral edges were comparatively investigated. The developed methods successfully localized impact damages into 2D coordinates. Furthermore, damage severity can be shown with a damage map by calculating electrical resistance change ratio. Therefore, structural health self-sensing system using electrical resistance was successfully developed with the minimum number of electrodes.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.36-47
• /
• 2024

The purpose of this study is to identify the factors that impact the user's intention to accept technology when Introducing new information security systems for the workers of a semiconductor company. The findings of this study were as follows. First, the factors of a company's information security systems, namely reliability, expertise, availability, security, and economic efficiency, all significantly and positively impacted performance expectations. Second, the performance expectation of introducing information security systems for a company significantly and positively impacted the intention to accept technology. Third, the social impact of introducing information security systems for a company had a significant and positive impact on technology acceptance intention. Fourth, the facilitating conditions for introducing a company's information security systems significantly and positively impacted technology acceptance intention. Fifth, as for the moderating effect of innovation resistance, the moderating effect was significant in the paths of [performance expectation -> technology acceptance intention], [social impact -> technology acceptance intention], and [facilitating conditions -> technology acceptance intention]. The implication of this study is that the factors to be considered when introducing information security systems were provided to companies that are the actors of their proliferation, providing the base data to lay the foundation for introducing security technologies and their proliferation.