• 대한두개안면성형외과학회지
• /
• 제18권1호
• /
• pp.25-29
• /
• 2017

Background: Many authors have evaluated the post-reduction result of nasal bone fracture through patient satisfaction or postoperative complications. However, these results are limited because they are subjective. The aim of this study was to correlate an objective operation result with patient satisfaction and postoperative complications according to the type of nasal bone fractures. Methods: Our study included 313 patients who had isolated nasal bone fractures and had undergone a closed reduction. Postoperative outcomes were evaluated objectively using computed tomographic (CT) images, while patient satisfaction was evaluated one month after the operation. The correlation of the operation result with patient satisfaction was then evaluated. Results: The correlation between the operation result and patient satisfaction was highest for the lateral impact group type I (LI) type of fracture and lowest for the comminuted fracture group (C) type of fracture. However, there were no statistically significant differences in correlation between the overall result and patient satisfaction by fracture type. The complication rate of lateral impact group type II (LII), C, and frontal impact group type I (FI) fractures were statistically significantly higher than that of frontal impact group type II (FII) and LI fractures. There were no statistically significant relationships between the prevalence of complications and septal fracture or deviation according to the fracture type. In the total group, however, there was a statistically significant difference in complication rate by septal fracture. Conclusion: We found that the CT outcomes correlated with patient satisfaction. The complication rate of LII, C, and FI fractures were statistically significantly higher than that of FII and LI fractures. Septal fracture/deviation increased the postoperative complication in the total group.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.17-24
• /
• 2005

During handling unitized products, they are subjected to a variety environmental hazards. Shock and vibration hazards are generally considered the most damaging of the environmental hazards on a product, and it may encounter while passing through the distribution environment. A major cause of shock damage to products is drops during manual handling. The increasing use of unitization on pallets has been resulted in a reduction in the manual handling of products and with it a reduction in the shock hazards. This has caused and increasing interest in research focused on vibration caused damage. the use of pallets as a base for unitizing loads, aids in the mechanical handling, transportation and storage of products. Besides aiding in the handling, transportation and storage of products, a pallet also acts on and interface between the packaged goods and the distribution environment. The determination of the impact deformation of the cushioning materials such as tray cup (polymeric foam) and corrugated fiberboard pad must be carried out to design the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. In this study, the theoretical analysis of impact deformation for cushioning materials by dynamic vibration. The impact deformations of SW and DW corrugated fiberboard pad in acceleration amplitudes of 0.25 G-rms and 0.5 G-rms that were usually generated in transport vehicles during distribution environments were very small compare with the thickness of corrugated fiberboard pad. The maximum of vibration acceleration level of tray cup by vibration impact was about 3.2 G-rms. The theoretical allowable acceleration (G-factor) of the pear was 0.7102 G-rms, and the maximum dynamic deformation estimated within G-factor was about 1 mm.

• 한국수자원학회논문집
• /
• 제56권12호
• /
• pp.855-869
• /
• 2023

도심지의 잦은 홍수피해를 해결하기 위한 대책으로 저영향개발기법은 지속적으로 연구중에 있다. LID는 도시화의 영향으로 부터 물순환을 회복하기 위해 강우유출 지점에서 침투 및 저류를 기반으로 개발이전의 물순환 상태로 회복하기 위해 도입된 기술이다. 그 중 식생저류지는 LID 요소중 하나로 우수유출수의 침투 및 저류를 통해 유출량을 감소하고, 비점오염원 저감 효과를 가지고 있다. 식생저류지의 연구는 지속적으로 수행되었으나 소유역 규모에서의 정량적 성능연구는 부족한 실정이다. 본 연구에서는 정량적 수문해석을 할 수 있는 K-LIDM (Korea-Low Impact Development Model)을 활용하여 식생저류지 유역 구축을 통해 유출량 저감성능 분석을 수행하였다. 연구결과는 추후에 유역특성, 식생유형 및 토양상태 등 여러가지 변수들을 포함한 연구수행시 참고자료로 활용될 수 있을것으로 사료된다.

• 대한환경공학회지
• /
• 제38권5호
• /
• pp.269-278
• /
• 2016

수도권지역의 대기오염을 개선하기 위해 수도권 대기환경 개선에 관한 특별법이 제정되었고 2005년부터 시행되었다. 그 결과 수도권의 대기질은 개선되었으나 각 대책의 평가에 대한 연구는 부족하다. 이에, 본 연구는 도로이동오염원의 배출량 저감정책이 질소산화물의 농도저감에 미치는 영향을 정량적으로 분석하고자 하였다. 이를 위해 MM5-SMOKE-CMAQ 모델 시스템을 이용하여 수치모사를 수행하였다. 2007년 수도권 $NO_x$ 저감 배출량은 16,561톤으로서 4.7%의 저감률을 보였다. 여러 대책 중 제작차 배출허용기준강화 대책이 가장 효과적이었다. 지역별 삭감실적은 차이가 커서 서울의 삭감률은 인천과 경기의 약 2배에 달하였다. 결과적으로 $NO_x$ 저감의 효과는 서울 도심에 집중적으로 나타났다. 이동오염원 저감대책에 의하여 서울의 $NO_2$ 농도는 연평균 0.60 ppb (2.0%)저감되었고 인천과 경기는 각각 0.18 ppb (1.5%), 0.22 ppb (1.7%)가 저감되었다. 봄과 겨울의 저감농도는 여름과 가을에 비해 1.5~2.0배 정도 높았다. 도심과 풍하지역으로의 $NO_2$ 저감효과 분산때문에 도심지역의 $NO_x$ 배출량 저감이 직접적인 $NO_2$ 농도 저감에 효과적이지 않았다.

• 한국습지학회지
• /
• 제19권3호
• /
• pp.271-278
• /
• 2017

최근 비점오염물질 처리를 위하여 저영향개발(low impact development) 기술이 적용되고 있으며, 레인가든 기술은 생물학적 및 물리화학적 처리에 의하여 비점오염물질 저감에 기여하기에 광범위하게 적용되고 있는 LID 기술 중 하나이다. 그러나 유지관리를 지속적으로 수행하지 않아 시설 내 막힘 현상 등의 문제가 발생한다. 따라서 본 연구는 효율적인 물수지 및 오염물질 저감을 위해 레인가든 기술의 구성 요소 배치의 개발 및 평가를 위하여 수행하였으며, 서로 다른 2개의 하이브리드 레인가든 시스템 구축을 통하여 시스템의 최적화된 설계 및 구성요소의 배열을 도출하였다. 분석 결과, 시스템의 구성요소를 직렬로 배열 시 저감량은 유출량의 경우 96%, 오염물질 중 입자상 물질은 99%, 유기물질은 93% 및 중금속은 95%로 나타났다. 반면 시스템이 병렬로 배열 될 시, 유출량은 65% 저감되었으며, 평균 오염물질 저감효율은 TSS는 94%, 영양물질은 80% 및 중금속은 85%으로 평가되었다. 또한, 시스템의 구성요소가 비점오염물질 저감에는 침전, 침투도랑 및 식재부의 순서가 중요한 영향인자로 나타났다. 향후 레인가든 시스템 개발 시 최적화 설계 인자로 활용 가능할 것으로 기대된다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제21권2호
• /
• pp.73-96
• /
• 2012

With emergence of smart technologies(e.g., smartphones), Location-Based Services(LBS) are expected to provide more enhanced values utilizing consumers' personal information than other smart services. However, in contrast to existing smartphone applications, LBS could raised severe consumer's privacy concerns because of rapidly changing information sensitive to consumers. In this context, the purpose of this study is to explore relationships among privacy concerns reduction, trust and intention to use LBS by examining the effect of precedence factors(social presence, reputation, mobile literacy, ability of information control) of privacy concern reduction. In addition, the study investigates the role of personal innovation as a moderating effect between privacy concern reduction and intention to use LBS. The results showed that the proposed precedence factors of privacy concerns with a exception of Mobile Literacy had a positive impact on privacy concerns reduction that then positively affected trust and intention to use LBS. In addition, the relationship between trust and intention to use LBS was significantly supported. Finally, personal innovation as a moderating effect significantly influenced the relationship between privacy concern reduction and intention to use LBS. This study is expected to be a reference for a subsequent study about the spread of LBS application of smartphone. Also, the finding of this study is meaningful for helping service direction to firms providing LBS.

• Wind and Structures
• /
• 제36권1호
• /
• pp.41-60
• /
• 2023

The effect of cladding panel size on the size reduction factor (SRF) of extreme area-averaging wind pressure (EAWP) on the facades of a high-rise building is often ignored in previous studies. Based on wind tunnel tests, this study investigated the horizontal and vertical correlations of wind pressure on the facade claddings of square-section high-rise buildings. Then, the influencing parameters on the SRF of the EAWP on the cladding panels were analyzed, which were the panel area, panel width, panel length and building width. The results show clear regional distinctions in the correlation of wind pressures on the building facades and the rules of the horizontal and vertical correlations are remarkably different, which causes the cladding size ratio to impact the SRF significantly. Therefore, this study suggests the use of the non-dimensional comprehensive size parameter b^𝜶h^1-𝜶/B (𝜶 is the fitting parameter) determined by the cladding panel horizontal size b, cladding panel vertical size h and the building width B rather than the cladding panel area to describe the variation of the EAWP. Finally, some empirical formula for the SRF of the EAWP on the cladding of a high-rise building is proposed with the nondimensional comprehensive size parameter.

• 환경영향평가
• /
• 제22권6호
• /
• pp.667-676
• /
• 2013

This study analyzed the energy demand, greenhouse gas emission and greenhouse gas reduction potential of Electronic Electrical components company. The LEAP model targeting long term energy plan was used to establish the most efficient plan for the companies by examining the climate change policy of government and the countermeasures by companies. A scenario was created by having 11 greenhouse gases reduction plans to be introduced from 2011 as the basic plan. Regarding input data, energy consumption by business place and by use, number of employee from 2009 to 2012, land area and change in number of business places were utilized. The study result suggested that approximately 13,800 TJ of energy will be spent in 2020, which is more than 2 times of 2012 energy consumption. When the integrated scenario based on the reduction plan of companies would be enforced, approximately 3,000 TJ will be reduced in 2020. The emission of greenhouse gases until 2020 was forecasted as approximately 760,000 ton $CO_2eq$. When the integrated scenario would be enforced, the emission will be approximately 610,000 ton $CO_2eq$, which is decrease by approximately 150,000 ton $CO_2eq$. This study will help the efficient responding of eElectronic Electrical components company in preparing detail report on objective management system and enforcement plan. It will also contribute in their image as environment-friendly companies by properly responding to the regulation reinforcement of government and greenhouse gases emission target based on environment policy.

• Wind and Structures
• /
• 제26권2호
• /
• pp.75-87
• /
• 2018

A large number of low-rise buildings experienced serious roof covering failures under strong wind while few suffered structural damage. Clay and concrete tiles are two main kinds of roof covering. For the tile roof system, few researches were carried out based on Finite Element (FE) analysis due to the difficulty in the simulation of the interface between the tiles and the roof sheathing (the bonding materials, foam or mortar). In this paper, the FE analysis of a single clay or concrete tile with foam-set or mortar-set were built with the interface simulated by the equivalent nonlinear springs based on the mechanical uplift and displacement tests, and they were expanded into the whole roof. A detailed wind tunnel test was carried out at Tongji University to acquire the wind loads on these two kinds of roof tiles, and then the test data were fed into the FE analysis. For the purpose of validation and calibration, the results of FE analysis were compared with the full-scale performance ofthe tile roofs under simulated strong wind impact through one-of-a-kind Wall of Wind (WoW) apparatus at Florida International University. The results are consistent with the WoW test that the roof of concrete tiles with mortar-set provided the highest resistance, and the material defects or improper construction practices are the key factors to induce the roof tiles' failure. Meanwhile, the staggered setting of concrete tiles would help develop an interlocking mechanism between the tiles and increase their resistance.

• 한국농공학회논문집
• /
• 제65권5호
• /
• pp.69-80
• /
• 2023

Carbon neutrality in agriculture can be derived from systematic GHG reduction policies based on quantitative environmental impact analysis of GHG-emitting activities. This study is to explore how to advance the calculation of carbon emissions from agricultural activities to the detailed spatial level to a spatial Tier 3 level (Tier 2.5 level), methodologically beyond the Tier 2 approach. To estimate the GHG emissions beyond the Tier 2.5 level by region for detailed spatial units, we constructed available activity data on carbon emission impact factors such as rice cultivation, agricultural land use, and livestock. We also built and verified detailed data on emission activities at the field level through field surveys. The GHG emissions were estimated by applying the latest national emission factors and regional emission factors according to the IPCC 2019 GL based on the field-level activity data. This study has significance that it explored ways to build activity data and calculate GHG emissions through statistical data and field surveys based on parcels, one of the smallest spatial units for regional carbon reduction strategies. It is expected that by utilizing the activity data surveyed for each field and the emission factor considering the activity characteristics, it will be possible to improve the accuracy of GHG emission calculation and quantitatively evaluate the effect of applying reduction policies.