• 한국유기농업학회지
• /
• 제23권3호
• /
• pp.455-467
• /
• 2015

This study analyzed the regional economic feasibility of greenhouse gases (GHGs) reduction technology in paddy rice. Firstly, the impact of GHGs reduction technology on productivity, emission reduction, and costs is different from region to region. Secondly, the water irrigation system contributes to productivity, GHGs reduction, and water reduction, but the profit of paddy rice will decrease because of increase in fixed costs and variable costs. Thirdly, the economic feasibility shows that water-savings plot has a 1.41 in a benefit-cost ratio.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1419-1424
• /
• 2003

Impact analysis of TFT-LCD module is very complicated because the structure is assisted with thin, small and non-uniform geometry. Especially, finite element modeling is more difficult and need time-consuming efforts. In this study, we developed LCD Impact Analysis System (LIAS) for the purpose of reducing the analysis time without accuracy reduction. This system contains pre-meshing data, material database, shock condition, auto-reporting etc. PATRAN and DYNA3D is used for meshing and solving. Previously, we performed impact test and reviewed the accuracy of analysis results. Simply we can control design parameters, the procedure such as meshing, running and reporting which are partially auto-prepared. By adopting proposed system, it is expected to achieve efficient impact analysis of LCD module.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.276-277
• /
• 2012

This study was carried out in the laboratory of the reverberation. A total of six specimens were fabricated depending on the thickness and strength. Floor impact sound insulation performance was measured in 1/3 octave band center frequency. The results of this study are as follows. Although some differences in the frequency band, the result of evaluating the weight impact sound blocking performance as the thickness increases, the floor impact sound insulation performance is improved. In addition, to increase the strength of the slab, even if the block impact sound performance is improved.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.101-109
• /
• 2000

Occupant protection in the side impact of a car became one of the most important issues of car crashworthiness due to high injury level in a side impact crash. An accurate simulation of the side impact crash is an essential tool for the reduction of development time and cost for side impact safety system. This paper describes a new test methodology that can accurately generate the crash pulses of a vehicle and a door in a very cost-effective manner, and then evaluates the injury values of the dummy for the various sled pulses. This test methodology is simple and easy to approach because the door velocity is controlled by the hydraulic actuator and brake and the seat velocity is only adjusted by the friction force of the hydraulic brake. The superiority of the proposed test methodology is proven by the evaluation of dummy's injury values according to the change of the pressure of the hydraulic brake and by the application as a tool for the development of side airbag.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.97-102
• /
• 2004

The Characteristics of noise and vibration by heavy-weight floor impact sound was studied. Resonance frequency increased a little in structures that use damping material in living room and bedroom, and acceleration waves length that respond became short, and displayed aspect that oscillation level decreases. Result that measure sound pressure level, structure that compare and applies damping materials with structure that apply the resilient materials from 63Hz lower part that impact energy is concentrated in energy spectrum of heavy-weight floor impact sound displayed result that sound pressure, level decreases remarkably. Therefore, according to use of damping materials, confirmed reduction effect of heavy-weight floor impact sound.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제26권6호
• /
• pp.291-300
• /
• 2023

Purpose: The impact of coronavirus 2019 (COVID-19) on gastrointestinal (GI) endoscopy procedures in adults has been reported, with a drastic reduction in the number of procedures. However, there are no sufficient data regarding the impact on pediatric GI endoscopy. Here, we aimed to report that impact in the Asia-Pacific region. Methods: A questionnaire-based internet survey was conducted from June to November 2021 among pediatric endoscopy institutions in the Asia-Pacific region, with each institution providing a single response. Overall, 25 questions focused on the impact of the number of procedures conducted, the usage of personal protective equipment (PPE), and endoscopy training programs during the pandemic. Results: A total of 162 institutions across 13 countries in the Asia-Pacific region participated in the study, and 133 (82.1%) institutions underwent procedure changes since the emergence of COVID-19. The number of esophagogastroduodenoscopy and ileocolonoscopy procedures decreased in 118/133 (88.7%) and 112/133 (84.2%) institutions, respectively. Endoscopy for patient with positive COVID-19 in an emergency or urgent cases still carried out in 102/162 (62.9%) institutions. Screening of COVID-19 for all patients before endoscopy was done across 110/162 (67.9%) institutions. PPE recommendations varied among institutions. Pediatric gastrointestinal endoscopy training programs were discontinued in 127/162 (78.4%) institutions. Conclusion: This study reports the impact of the COVID-19 pandemic on pediatric gastrointestinal endoscopy in the Asia-Pacific region. There has been a significant reduction in the number of endoscopic procedures and relevant training programs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.383-386
• /
• 2005

Low frequency heavy-weight impact noise is the most irritating noise in Korean high-rise reinforced concrete apartment buildings. This low frequency noise is generated by foot traffic due to the fact that Koreans do not wear shoes at home. The transmission of the noise is facilitated by a load bearing wall structural system without beams and columns which is used in these buildings. In order to control low frequency heavy-weight impact noise, floating floors using isolation materials such as glass-wool mat and poly-urethane mat are used. However, it was difficult to control low frequency heavy-weight impact sound using isolation material. In this study, reinforcement of concrete slab using beams and plate was conducted. Using the FEM analysis, the effect of concrete slab reinforcement using FRP(fiber-glass reinforced plastic) on the bang machine impact vibration acceleration level and sound were conducted at the standard floor impact sound test building. The $3{\sim}4dB$ floor impact vibration acceleration level and impact sound pressure level were reduced and the natural frequency of slabs were changed.

• Bulletin of the Korean Chemical Society
• /
• 제17권10호
• /
• pp.885-892
• /
• 1996

The effects of NOx reduction by advanced fuel staging in a small scale combustor (6.6 kWT) have been investigated using propane gas flames laden with ammonia as fuel-nitrogen. The variables which had the greatest influence on NOx reduction were temperature, reducing stoichiometry (relate to main combustion zone stoichiometry, air fraction and reburning fuel fraction) and residence time of reducing zone. NOx reduction was best at the reburning zone temperature of above 1,000 ℃ and reburning zone stoichiometry was 0.85. In terms of residence time of the reburning zone, NOx reduction was effective when burnout air was injected at the point where the reburning zone had been already established. In the advanced fuel staging NOx reduction was relatively large at the burning of higher Fuel-N concentration in the fuel. Under optimum reburning conditions, fuel nitrogen content had a relatively minor impact on reburning efficiency.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권4호
• /
• pp.107-114
• /
• 2023

In this paper, the results of experiments conducted in indoor wired and outdoor wireless environments to reduce the interference impact of 5G mobile communication on fixed satellite services using RF Interference Reduction Module (IRM) are presented. Test results for interference signals with a 100MHz bandwidth in a wired environment demonstrate that RF IRM can reduce interference by more than 20dB in a 100MHz bandwidth. The performance of RF IRM was also tested in the S-band wireless environments. In the S-band wireless environments with interference signals having a 20MHz bandwidth, RF IRM exhibits interference reduction performance of 12-15dB, for signals with a 50MHz bandwidth, it shows 10-12dB interference reduction, and for signals with a 100MHz bandwidth, it demonstrates 5-10dB interference reduction. This paper shows that RF IRM can be used not only within transceivers but also in wireless environments to mitigate interference.

• 환경영향평가
• /
• 제22권3호
• /
• pp.195-201
• /
• 2013

Local governments are establishing their own greenhouse gas reduction goal and are playing a important role to respond to climatic changes. However, there are difficulties in quantitative analyses such as estimation of future greenhouse gas emission and computation of reduction potential, which are procedures required to establish mid to long term strategies to realize of low carbon society by each local governments. Also, reduction measures must reflect characteristics of each local government, since the reduction power of each local government can differ according to characteristics of each. In order to establish strategies that reflect characteristics of local governments, types of greenhouse gas emission from cities were classified largely into residential city, commercial city, residential commercial city, agriculture and fishery city, convergence city, and industrial city. As a result of analyzing basic unit of greenhouse gas emission by local government during 2007 in terms of per population, household and GRDP based on the type classification, significant results were deduced for each type. To manage the amount of the national greenhouse gas, reduction measures should be focused on the local governments that emits more than the average of each type's GHG emission.