• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1597-1605
• /
• 2022

A porous silica-based adsorbent was prepared by impregnating the pores of a silica support with the extractant 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene (Calix[4]arene-R14) and an additive agent 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C₂mim ⁺ NTf^-₂) as the materials to remove cesium(I) (Cs⁺) ions from seawater. The as-prepared adsorbent showed excellent adsorption performance toward Cs⁺ ions, with adsorption equilibrium reached within 2 h and an adsorption amount of 0.196 mmol/g observed. The solution pH, temperature, and the presence of coexisting metal ions were found to have almost no effect on Cs⁺ adsorption. The adsorption mechanism was considered to proceed via ion exchange between Cs⁺ and C₂mim⁺. In addition, the particle-induced X-ray emission analysis results further clarified that the adsorbed Cs⁺ ion species on the adsorbent was in the form of both CsCl and CsBr.

• Advances in nano research
• /
• v.14 no.4
• /
• pp.355-362
• /
• 2023

Physical exercise, especially intense exercise and high intensity interval training (HIIT) by trampoline, can lead to muscle injuries. These effects can be reduced with intelligent products made of nanocomposite materials. Most of these nanocomposites are polymers reinforced with silicon dioxide, alumina, and titanium dioxide nanoparticles. This study presents a polymer nanocomposite reinforced with silica. As a result of the rapid reaction between tetraethyl orthosilicate and ammonia in the presence of citric acid and other agents, silica nanostructures were synthesized. By substituting bis (4-amino phenoxy) phenyl-triptycene in N, N-dimethylformamide with potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C, the diamine monomer bis (4-amino phenoxy) phenyl-triptycene is prepared. We synthesized a new polyaromatic (imide) with triptycene unit by sol-gel method from aromatic diamines and dianhydride using pyridine as a condensation reagent in NMP. PI readily dissolves in solvents and forms robust and tough polymer films in situ. The FTIR and NMR techniques were used to determine the effects of SiO₂ on the sol-gel process and the structure of the synthesized nanocomposites. By using a simultaneous thermal analysis (DTA-TG) method, the appropriate thermal operation temperature was also determined. Through SEM analysis, the structure, shape, size, and specific surface area of pores were determined. Analysis of XRD results is used to determine how SiO₂ affects the crystallization of phases and the activation energy of crystallization.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.4
• /
• pp.193-197
• /
• 2023

Transparent and conducting titanium (Ti) doped indium oxide (TIO) thin films were deposited on the poly-imide (PI) substrate with radio frequency magnetron sputtering and then electron irradiation was conducted on the TIO film's surface to investigate the effect electron irradiation on the crystallization and opto-electrical properties of the films. All x-ray diffraction (XRD) pattern showed two diffraction peaks of the In₂O₂ (431) and (444) planes with regardless of the electron beam irradiation energy. In the AFM analysis, the surface roughness of as deposited films was 3.29 nm, while the films electron irradiated at 700 eV, show a lower RMS roughness of 2.62 nm. In this study, the FOM of as deposited TIO films is 6.82 × 10^-3 Ω^-1, while the films electron irradiated at 500 eV show the higher FOM value of 1.0 × 10^-2 Ω^-1. Thus, it is concluded that the post-deposition electron beam irradiation at 500 eV is the one of effective methods of crystallization and enhancement of opto-electrical performance of TIO thin film deposited on the PI substrate.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.217-222
• /
• 2006

Polyimides have been investigated extensively and used widely over the past three decades because of their high performance properties such as excellent thermal, mechanical, and electrical properties. Polyimides are difficult to be processed because of the aromatic moieties, imide group, and insoluble nature in most organic solvents. The soluble polyimides were synthesized from 2,2,-bis(3-amino-4-hydroxyphenyl) hexafluoropropane (BAPAF) and 3,3,-diamino-4,4-dihydroxybyphenyl (HAB) as aromatic diamines and 4,4-(hexafluoroisopropylidene)diphthalic dianhydride (6FDA), pyromellitic dianhydride (PMDA), 4,4-oxydiphthalic dianhydride (OPDA), 3,3,4,4-benzophenone tetracarboxylic dianhydride (BTDA) and 3,3,4,4-diphenylsulfone tetracarboxylic dianhydride (DSDA) as aromatic dianhydrides. The polyimides were characterized by NMR, FR-IR, TGA and the dielectric constant of the obtained polyimides was calculated from storage of electro-capacity. A novel photosensitive polyimide was synthesized by the reaction of polyimide, containing hydroxyl group and methacryloyl chloride using triethylamine. The good micro-pattern was obtained with photosensitive polyimide from the photolithographic technique.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.30.1-30.1
• /
• 2011

Silicon is one of useful materials in various industry such as semiconductor, solar cell, and secondary battery. The metallic silicon produces generally melting process for ingot type or chemical vapor deposition (CVD) for thin film type. However, these methods have disadvantages of high cost, complicated process, and consumption of much energy. Electrodeposition has been known as a powerful synthesis method for obtaining metallic species by relatively simple operation with current and voltage control. Unfortunately, the electrodeposition of the silicon is impossible in aqueous electrolyte solution due to its low oxidation-reduction equilibrium potential. Ionic liquids are simply defined as ionic melts with a melting point below $100^{\circ}C$. Characteristics of the ionic liquids are high ionic conductivities, low vapour pressures, chemical stability, and wide electrochemical windows. The ionic liquids enable the electrochemically active elements, such as silicon, titanium, and aluminum, to be reduced to their metallic states without vigorous hydrogen gas evolution. In this study, the electrodeposion of silicon has been investigated in ionic liquid of 1-butyl-3-methylpyrolidinium bis (trifluoromethylsulfonyl) imide ([bmpy]$Tf_2N$) saturated with $SiCl_4$ at room temperature. Also, the effect of electrode materials on the electrodeposition and morphological characteristics of the silicon electrodeposited were analyzed The silicon electrodeposited on gold substrate was composed of the metallic Si with single crystalline size between 100~200nm. The silicon content by XPS analysis was detected in 31.3 wt% and the others were oxygen, gold, and carbon. The oxygen was detected much in edge area of th electrode due to $SiO_2$ from a partial oxidation of the metallic Si.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.214-214
• /
• 2003

고체 고분자 전해질에 대한 연구는 1979년 wright와 Armand에 처음 시작된 이래로 지난 20여년간 연구가 계속적으로 지속되고 있다. 전지의 적용되기 위해 전해질이 갖추어야 할 조건중에 이온전도도가 상온에서 10-4 S/cm 이상의 전도도를 나타내야 하지만 지금까지 연구되고 있는 여러 고체 고분자 전해질은 이런 조건을 만족시키지 못하고 있는 실정이다. 본 연구에서는 이런 상온에서의 이온 전도성을 향상시키기 위해 여러 종류의 실리카와 세라믹 계열의 첨가제를 첨가하여 이온전도성의 향상을 꾀하고자 하였다. 본 연구에서는 고체 고분자 전해질의 host polymer로써 분자량 400,000 의 Polyethylene oxide를 사용하였으며 Lithuim salt로는 Lithium (bisperfluroethylsulfonyl)imide(3M)를 기본적으로 사용하였다. 여기에 가소제의 역활로써 (3-cyanopropyl)methylsiloxane cyclics를 첨가하였고 표면그룹이 CH3와 OH기로 이루어진 기능성 나노 실리카를(<11nm)이용하여 함량별 전기 화학적 특성 및 기본 물성을 측정하였다. 기본적으로 이 네 가지 물질을 유기용매 Acetonitril에 잘 용해하여 Solid Casting방법으로 80-100 마이크로의 복합고분자 전해질을 제조하였다. Homogeneous하고 uniform한 필름 제조하기 위해 9$0^{\circ}C$에서 열처리를 24h 동안 실시하였다. 제조되어진 복합고분자전해질은 XRD를 통하여 결정성을 조사하였고 DSC를 이용하여 유리 전이온도 및 결정화도를 조사하였다. 복합고체고분자의 전기화학적 성질을 평가하기 위해 blocking electrode를 제작하여 임피던스 스펙트로 스코피를 이용하여 이온전도성을 측정하였다. 또한 복합 고분자 전해질의 온도의존성에 대해서도 조사하였다. 또한 실제 전지의 작동구간에서의 전해질의 안정성을 확인하기 위해 LSV를 측정하였고. Li metal을 사용하여 non-blocking electrode를 제작하여 복합고분자 전해질과의 계면저항을 측정하였다.

• Archives of Pharmacal Research
• /
• v.20 no.1
• /
• pp.53-57
• /
• 1997

For the purpose of defining the effects of the N-substituted alkyl groups on the anticonvulsant activities of N-Cbz-.alpha.-aminosuccinimides, various (R)- and (S)-N-alkyl substituted N-Cbz-.alpha.-aminosuccinimides (1 and 2) were prepared from the corresponding (R)- and (S)-N-Cbz-aspartic acid by using known reaction and were evaluated the anticonvulsant activies in the MES and PTZ tests, including their neurotoxicities. The most active compound in the MES test was (R)N-Cbz-.alpha.-amino-N-methylsuccinimide (1b) $(ED_{50}=52.5 mg/kg, Pl=3.2)$. And in case of the PTZ test, (R)-N-Cbz-.alpha.-amino-N-ethylsuccinimide (1c) was the most active compound $(ED_{50}/=32.5mg/kg, Pl=3.1)$. The order of anticonvulsant activities of these compounds against the MES test, as judged from the ED_50values for the R series (1), was N-methyl > N-isobutyl > non-substituted > N-ethyl, N-allyl > N-benzyl compound; for the S series (2) N-methyl > N-altyl > non-substituted > N-isobutyl > N-ethyl > N-benzyl compound. The anticonvulsant activities in the PTZ tests of these compounds exhibited somewhat different pattern ; for the R series (1) Nethyl > N-methyl > N-isobutyl> non-substituted > N-allyl > N-benzyl compound in order of decreasing activity; for S series (2) N-ethyl > N-allyl, non-substituted > N-isobutyl > N-methyl > N-benzyl compound in order of decreasing activity.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2603-2606
• /
• 2010

Novel soluble triazoleimide oligomers terminated with arylacetylene terminated were synthesized by the Cu(I)-catalysed 1,3-dipolar cycloaddition polymerization of diazides and imide-containing dialkyne. Several molecular weight triazoleimide oligomers were prepared from diazide and dialkyne monomers with different stoichiometric combinations. The curing behaviors of the oligomers were tested by differential scanning calorimetry (DSC). The thermal properties of the cured products were evaluated by DSC and thermogravimetric analysis (TGA). These cured oligomers showed the glass transition temperature of about $225-235^{\circ}C$ and the decomposition temperature (at 5% weight loss) of about $385-393^{\circ}C$ in nitrogen.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.99-102
• /
• 2005

Organic solvents are widely used in biotransformation systems. There are many efforts to reduce the consumption of organic solvents because of their toxicity to the environment and human health. In recent years, several groups have started to explore novel organic solvents called room temperature ionic liquids in order to substitute conventional organic solvents. In this work, lipase-catalyzed transesterification in several uni- and bi-phasic systems was studied. Two representative hydrophobic ionic liquids based on 1-butyl-3-methylimidazolum coupled with hexafluorophosphate ([BMIM][$PF_6$]) and bis[{trifluoromethylsulfonyl} imide] ([BMIM] [$Tf_{2}N$]) were employed as reaction media for the transesterification of n-butanol. The commercial lipase, Novozym 435, was used for the transesterification reaction with vinyl acetate as an acyl donor. The conversion yield was increased around $10\%$ in a water/[BMIM][$Tf_{2}N$] bi-phasic system compared with that in a water/hexane system. A higher distribution of substrates into the water phase is believed to enhance the conversion yield in a water/[BMIM][$Tf_{2}N$] system. Partition coefficients of the substrates in the water/[BMIM][$Tf_{2}N$] bi-phasic system were higher than three times that found in the water/hexane system, while n-butyl acetate showed a similar distribution in both systems. Thus, RTILs appear to be a promising substitute of organic solvents in some biotransformation systems.

• Current Research on Agriculture and Life Sciences
• /
• v.19
• /
• pp.39-43
• /
• 2001

The studies was conducted to establish the indoor overwintering methods for productive honeybee colonies in the wintering chamber which provides satisfactory imide temperature ranging $2{\sim}9^{\circ}C$ and ventilation for the wintering hooeybee colonies in Korea. Mortality of the indoor wintered hooeybee colonies was 6.3~7.1% during the winter season of 1997~1998 and 5~10% during the winter season of 1998~1999. The decreased rates of colony weights dwing the wintering season were 10.6~10.7% in the strong colonies and 10.2~11.7% in the weak colonies. The increased rates of colony population overwintered in the chamber were 136.1~142.3% in the strong colonies and 128~136.5% in the weak colonies.