• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2633-2636
• /
• 2011

A new type of ionic liquid based on N-(3-aminepropyl)imidazolium iodide, called IIQAI, which consists of imidazolium and quaternary ammonium salt, and APII-(hydroxyethyl, propyl, hexyl) were synthesized and used as ionic liquid in dye-sensitized solar cells. APII-hexyl is solid, whereas IIQAI, APII-(hydroxyethyl, propyl) are viscous liquids. The synthesized ionic liquid showed relative thermal stability compared to the commercial ionic liquid of DMII. Among them, IIQAI was more stable than the other ionic liquid because of the two salt groups. APII-hydroxyethyl, which contains two hydroxyl groups, showed low viscosity with good flow. New types of ionic liquids were examined by $^1H$-NMR spectroscopy, thermo gravimetric analysis (TGA). IIQAI enabled a solar energy conversion efficiency of 6.3%, which is slightly higher than that of the referenced (DMII, 6.2%).

• Applied Chemistry for Engineering
• /
• 제25권3호
• /
• pp.249-253
• /
• 2014

Palladium on carbon catalysts for hexafluoropropylene hydrogenation were prepared using imidazolium hexafluorophosphate with various cation parts. The morphology of palladium was relatively affected by the cation parts of the ionic liquid. With increasing alkyl chains of the ionic liquid cation, the shape of palladium particle changed from spherical to cylindrical due to the effect of steric stabilization. After calcination at $500^{\circ}C$, all catalysts possessed the comparable crystal structure. Under the identical reaction conditions, the catalyst prepared using the ionic liquid with hexyl chain in cation parts showed the most effective reactivity.

• Journal of the Korean Electrochemical Society
• /
• 제13권3호
• /
• pp.198-202
• /
• 2010

Lithium co-polyelectrolyte-ionic liquid systems, using poly (lithium 2-acrylamido-2-methyl propanesulfonate; PAMPSLi) and polyvinyl formamid (PVF) were prepared and their electrochemical and physical properties were measured. The conductivity of co-polymer systems, PAMPSLi/PVF/N, N-dimethyl-N-propyl-N-butylammonium tricyanomethanide (PAMPSLi/PVF/$N_{1134}$TCM) and PAMPSLi/PVF/N, N-dimethyl-N-propyl-N-butylammonium dicyanamide (PAMPSLi/PVF/$N_{1134}$DCA) exhibited low viscosity ($N_{1134}$TCM:$N_{1134}$DCA 28.6cP, 28.7cP) and higher conductivity ($2.48{\times}10^{-3}Scm^{-1}$, $2.2{\times}10^{-3}Scm^{-1}$) than homopolymer system. The ionic conductivity PAMPSLi/PVF/1-ethyl-3-methyl imidazolium dicyanamide (PAMPSLi/PVF/emImDCA) exhibited $1.54{\times}10^{-3}Scm^{-1}$ and low viscosity (emImDCA: 28.09cP). High flexibility of imidazolium cation and dissociation of lithium cation from the co-polymer chains were affected by high conductivity and low viscosity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.117-117
• /
• 2015

Availability of X-ray photoelectron spectroscopy (XPS) for the identification of ionic liquids (ILs) was tested. Commercially available ionic liquids (1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIM] $BF_4$), (1-butyl-3-methyl imidazolium trifluoromethanesulfonate ([BMIM] OTf), (1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIM] $PF_6$), 1-hexyl-3-imidazolium hexafluorophosphate ([HMIM] $PF_6$), and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM] $Tf_2N$) were qualitatively and semi-quantitatively analyzed with XPS. In order to confirm whether the results of XPS were correct, conventional method such as a nuclear magnetic resonance (NMR) was performed. After the XPS results were convinced by NMR, we synthesized ILs (1-(4-sulfonic acid) butyl-3-butylimidazolium trifluoromethanesulfonate ([SBBIM] OTf), 1-(4-sulfonic acid) propyl-3-methylimidazolium trifluoromethanesulfonate ([SPMIM] OTf), and 1-(4-sulfonic acid) propyl-3-butylimidazolium trifluoromethanesulfonate ([SPBIM] OTf) and analyzed it with XPS and NMR as well. It was successful the usage of XPS to analyze ILs without any purification processes.

• Journal of the Korean Electrochemical Society
• /
• 제12권3호
• /
• pp.271-275
• /
• 2009

Five novel lithium polyelectrolyte-ionic liquid systems, using poly (lithium 2-acrylamido-2-methyl propanesulfonate; PAMPSLi) were prepared and their electrochemical properties were measured. The ionic conductivity of the PAMPSLi/1-ethyl-3-methylimidazolium tricyano methanide (emImTCM) system was exhibited high conductivity (1.28 $\times$ $10^{-3}$ $S/cm^{-1}$). The high conductivity and low viscosity of PAMPSLi/emImTCM system is due to the high flexibility of imidazolium cation and dissociation of lithium cation from the polymer chains. The PAMPSLi/N,N-dimethyl-N-propyl-Nbutylammonium tricyanomethanide ($N_{1134}TCM$) and PAMPSLi/N, N-dimethyl-N-propyl-N-butylammonium dicyanamide ($N_{1134}DCA$) systems showed fairly high conductivity (6.3 $\times$ $10^{-4}$ $S/cm^{-1}$, 6.0 $\times$ 10.4 S/cm.1). PAMPSLi/Trihexyl (tetradecyl) phosphonium bis (trifluoromethane sulfonyl) amide ($P_{66614}TFSA$) exhibited low conductivity (2.22 $\times$ $10^{-5}$ $Scm^{-1}$) and thermally stable over 400$^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.847-852
• /
• 2006

Imidazolium tetrafluoroborate ionic liquids having unsaturated aliphatic side chains were synthesized and characterized. Most of them are liquid at room temperature and all of them are stable up to $300{^{\circ}C}$. Some imidazolium tetrafluoroborates with an allylic side chain showed much wider voltage windows on the platinum electrode, better conductivities, and lower viscosities compared with the corresponding ionic liquids containing the saturated side chains.

• Applied Chemistry for Engineering
• /
• 제27권1호
• /
• pp.86-91
• /
• 2016

Three amorphous silicas and SBA-15 were employed as supports, which were capable of confining ionic liquid (IL) and metallocene in the nanopore. Ionic liquid functionalized silica was prepared by the interaction between the chloride anions of 1,3-bis(cyanomethyl)imidazolium chloride and the surface OH groups. Metallocene and methylaluminoxane (MAO) were subsequently immobilized on the ionic liquid functionalized silica for ethylene polymerization. The metallocene supported on ionic liquid functionalized XPO-2412 and XPO-2410 having a larger pore diameter compared to SBA-15 showed higher activity than that of using supported catalyst without ionic liquid functionalization. However, the activity of metallocene supported on SBA-15 decreased after ionic liquid functionalization, suggesting that the diffusion of ethylene monomer and cocatalyst to the active site of nanopore was restricted during ethylene polymerization. This could be resulted from significant reduction of the pore diameter due to the immobilization of ionic liquid and $(n-BuCp)_2ZrCl_2$ and MAO. The effect on polymerization activity in accordance with the concentration of hydroxyl groups on the surface was also investigated. The polymerization activity increased as the concentration of hydroxyl groups on amorphous silica increased. The polymerization activities of metallocene supported on silica showed the similar trend after ionic liquid functionalization.

• Rapid Communication in Photoscience
• /
• 제4권3호
• /
• pp.67-69
• /
• 2015

FTIR spectroscopy has been employed to investigate the variation of anion-water hydrogen bonding in 1-butyl 3-methyl imidazolium tetrafluoroborate ([Bmim][$BF_4$]) ionic liquid caused by addition of organic co-solvents with various polarities. The variation was estimated by probing band shape and intensity of the OH stretching vibration of trace water present in ionic liquid at $3400-3800cm^{-1}$. The presence of polar aprotic co-solvent in ionic liquid dramatically reduces the absorptivity of the OH stretch band, indicating that the co-solvent changes the nature of anion-water hydrogen bond drastically, which might be responsible for the reduction of the viscosity of ionic liquid in the presence of the co-solvent.

• Analytical Science and Technology
• /
• 제24권6호
• /
• pp.467-476
• /
• 2011

Solubility data of carbon dioxide ($CO_2$) in the imidazolium-based ionic liquids with methylsulfate anion are presented at pressures up to about 45 MPa and at temperatures between 303.15 K and 343.15 K. The ionic liquids studied in this work were 1-ethyl-3-methylimidazolium methylsulfate ([emim][$mSO_4$]), 1-butyl-3-methylimidazolium methylsulfate ([bmim][$mSO_4$]). The solubilities of $CO_2$ were determined by measuring the bubble point or cloud point pressures of the binary mixtures using a high-pressure equilibrium apparatus equipped with a variable-volume view cell. The equilibrium pressure increased very steeply at high $CO_2$ compositions. The $CO_2$ solubility in ionic liquids increased with increase of the total length of alkyl chains attached to the imidazolium cation of the ionic liquids. The phase equilibrium data for the $CO_2$ + ionic liquid systems have been correlated using the Peng-Robinson equation of state.

• Journal of the Korean Electrochemical Society
• /
• 제13권3호
• /
• pp.181-185
• /
• 2010

Polyaniline-ionic liquid composite was prepared and investigated its physical and electrochemical properties. The quasi-solidification was presented in imidazolium-based ionic liquid (1-methly-3-propylimidazolium iodide, PMI-I) containing above 30 wt% of polyaniline (emeraldine base), which exhibited around 80% decrease of conductivity compared to pristine ionic liquid, resulting in fibril structure trough ${\pi}-{\pi}$ self-assembled of imidazolium aromatic ring of ionic liquid on polyaniline framework.