• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.72-79
• /
• 1995

The purpose of this paper is to develop an automatic measuring system based on the digital image processing which can be applied to the in-process measurment of the characteristics of the thin thickness. The derivative operators is used for edge detection in gray level image. This concept can be easily illustrated with the aid of object shows an image of a simple light object on a dark background, the gray level profile along a horizontal scan line of the image, and the first and second derivatives of the profile. The first derivative of an edge modeled in this manner is 0 in all regions of constant gray level, and assumes a constant value during a gray level transition. The experimental results indicate that the developed automatic inspection system can be applied in real situation.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.240-242
• /
• 2008

In the present article, we analyze airborne Pi-SAR (Polarimetric-Interferometric SAR) X-band images of ocean waves around the Miyake Island at approximately 180 km south from Tokyo, Japan. Two images of a same scene were produced at approximately 40 min. interval from two directions at right angles. One image shows dominant range travelling waves, but the other image shows a different wave pattern. This difference can be caused by the different image modulations of RCS and velocity bunching. We have estimated the dominant wavelength from the image of range waves, and from the wave phase velocity computed from the dispersion relation (though no wave height data were available), the image intensity is computed by using the velocity bunching model. The comparison of the result with the second image at right angle strongly suggests the evidence of velocity bunching.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.1
• /
• pp.66-72
• /
• 2004

To assess tunnel safety, cracks in tunnel lining are measured by inspectors, who observe cracks with their naked eyes and record them. But manual inspection is slow, and measured crack data is subjective. Therefore, this study proposes inspection system fur measuring cracks in tunnel lining and providing objective crack data to be used in safety assessment. The system consists of On-vehicle system and Laboratory system. On-Vehicle system acquires image data with line CCD camera on scanning along the tunnel lining. Laboratory system extracts crack information from the acquired image using image processing. Measured crack information is crack thickness, length and orientation. To improve accuracy of crack recognition, the geometric properties and patterns of cracks in concrete structure were applied to image processing. The proposed system was verified with experiments in both laboratory environment and field environment such as subway tunnel.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.1-6
• /
• 1983

To give the recognition capability of task objects by computer vision to a sensor-based robot system, an image digitizer and some basic software techniques were developed and repofted here. The image digitizer was developed with the CROMEMCO SYSTEM III microcomputer anti C.C.T.V. camera to convert the analog valued scene into digitized image which could be pro-cessed by a digital computer. Basic software techniques for the computer vision system were aimed at the recognition of 3-dimensional objects. Experiments with these techniques were carried out using the image of a cubicle which could be considered as typical simple 3-dimensional object.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.2
• /
• pp.80-85
• /
• 2011

In this paper, I propose flexible base point used for a BTC(Block Truncation Coding). Halftoning images are used for printer by reducing the number of pixel depth. During over 20 years, many researches have been studied to apply this techniques to image compression. BTC algorithms are the compression methods using digital halftoning technique about images. In the BTC algorithm, an image block is divided into higher and lower domain compared with the mean of block. then the MAX and MIN representative values are evaluated by calculating the mean of higher and lower domain respectively. At a result, an image block(for example 88 size) is compressed into 64bits pixel representation and 16 bits of the MAX and MIN. And they also have been tried to sustain the image quality high after compression. In this paper, I found that there is some marginal possibility to enhance the image quality by adjusting the base point(generally mean of block) of existing algorithms.

• Journal of Advanced Marine Engineering and Technology
• /
• v.12 no.3
• /
• pp.43-56
• /
• 1988

The image processing system consisted of the microcomputer IBM PC-XT and the graphic board (16 gray level and $640{\times}400$ pixels resolution) has been proposed, and the image processing softwares programmed in the BASIC and in the assembler language have been developed. The programs are consisted of the main menu and the sub menu, that have contained the subroutine for the capture for image data, the determination of region, the histogram, the change of value, the montage, the skeleton, the mask, the moving, the zoom, the disk access and the print. For the application, the photoelastic fringe data have been captured and analyzed. It was seen that the programs are available for the image processing.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.806-810
• /
• 2008

This paper introduces the automatic fine Bituminous Coal injection lance position control method using flame image process. The fine Coal injection lance is used to supply additional heat into the furnace in Mill plant. It injects fine coal into high pressured air flow and produces very heated and high pressured flame. For the such high temperature and pressure, the fine coal injection lance effects not only efficiency of burner but also furnace abrasion. To keep efficient combustion status and to avoid the abrasion, in this paper, the flame is monitored by computer image process. This paper proposes the flame image process method and lance position control according to calculated result for flame image process.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.55-65
• /
• 2020

With the development of display hardware, image interpolation techniques have been used in various fields such as image zooming and medical imaging. Traditional image interpolation methods, such as bi-linear interpolation, bi-cubic interpolation and edge direction-based interpolation, perform interpolation in the spatial domain. Recently, interpolation techniques in the discrete cosine transform or wavelet domain are also proposed. Using these various existing interpolation methods and machine learning, we propose decision tree classification-based image interpolation methods. In other words, this paper is about the method of adaptively applying various existing interpolation methods, not the interpolation method itself. To obtain the decision model, we used Weka's J48 library with the C4.5 decision tree algorithm. The proposed method first constructs attribute set and select classes that means interpolation methods for classification model. And after training, interpolation is performed using different interpolation methods according to attributes characteristics. Simulation results show that the proposed method yields reasonable performance.

• International Journal of Human Ecology
• /
• v.12 no.2
• /
• pp.25-37
• /
• 2011

Website design (due to increased online retailing) has received more attention as a way to influence consumer responses (Eroglu et al., 2001, 2003; Kim et al., 2009; Kim & Lennon, 2008; Yoo et al., 2010); however, the website design of multichannel retailers has not been examined from the perspective of the consistency of online store image with the brand image. This study examines the effect of brand image consistency (especially through the website) on consumer attitude and patronage intentions. The findings of this research will add to the growing body of literature on multichannel retailing and provide practical information for online retailers in the development of a website for their online business.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.303-309
• /
• 2004

Many system devices for fluoroscopic and general X-ray studies in diagnostic radiographic system have been being changed from analog mode to digital mode. In addition, among diagnostic imaging and radiologic examinations, fluoroscopic studies that requires functional diagnosis is being widely used. The video recording method of fluoroscopic studies has been useful in functional image diagnosis and dynamic image observation, but the utility of its image quality is being reduced because of limitation in setting play segments of the video player, inconvenience of play, difficulties in preserving reproduced images, the change of image quality, etc. In order to complement these shortages, it is necessary to facilitate access to patient diagnosis information such as storing, editing and sharing functional diagnosis images in response to the trend of the digitalization of digital radiographic & fluoroscopic system(DRF). Thus this study designed and implemented a device of storing functional dynamic images real time using a computer rather than existing video recording, aiming at contribution to functional image diagnosis.