• Atmosphere
• /
• v.27 no.2
• /
• pp.119-131
• /
• 2017

We present and discuss the Tropopause Folding Turbulence Detection (TFTD) algorithm for the Korean Communication, Ocean, Meteorological Satellite (COMS) which is originally developed for the Tropopause Folding Turbulence Product (TFTP) from the Geostationary Operational Environmental Satellite (GOES)-R. The TFTD algorithm assumes that the tropopause folding is linked to the Clear Air Turbulence (CAT), and thereby the tropopause folding areas are detected from the rapid spatial gradients of the upper tropospheric specific humidity. The Layer Averaged Specific Humidity (LASH) is used to represent the upper tropospheric specific humidity calculated using COMS $6.7{\mu}m$ water vapor channel and ERA-interim reanalysis temperature at 300, 400, and 500 hPa. The comparison of LASH with the numerical model specific humidity shows a strong negative correlation of 80% or more. We apply the single threshold, which is determined from sensitivity analysis, for cloud-clearing to overcome strong gradient of LASH at the edge of clouds. The tropopause break lines are detected from the location of strong LASH-gradient using the Canny edge detection based on the image processing technique. The tropopause folding area is defined by expanding the break lines by 2-degree positive gradient direction. The validations of COMS TFTD is performed with Pilot Reports (PIREPs) filtered out Convective Induced Turbulence (CIT) from Dec 2013 to Nov 2014 over the South Korea. The score test shows 0.49 PODy (Probability of Detection 'Yes') and 0.64 PODn (Probability of Detection 'No'). Low POD results from various kinds of CAT reported from PIREPs and the characteristics of high sensitivity in edge detection algorithm.

• Atmosphere
• /
• v.29 no.5
• /
• pp.537-550
• /
• 2019

To analyze the observation environment of solar radiation stations operated by the Korea Meteorological Administration (KMA), we analyzed the skyline, Sky View Factor (SVF), and solar radiation due to the surrounding topography and artificial structures using a Digital Elevation Model (DEM), 3D camera, and solar radiation model. Solar energy shielding of 25 km around the station was analyzed using 10 m resolution DEM data and the skyline elevation and SVF were analyzed by the surrounding environment using the image captured by the 3D camera. The solar radiation model was used to assess the contribution of the environment to solar radiation. Because the skyline elevation retrieved from the DEM is different from the actual environment, it is compared with the results obtained from the 3D camera. From the skyline and SVF calculations, it was observed that some stations were shielded by the surrounding environment at sunrise and sunset. The topographic effect of 3D camera is therefore more than 20 times higher than that of DEM throughout the year for monthly accumulated solar radiation. Due to relatively low solar radiation in winter, the solar radiation shielding is large in winter. Also, for the annual accumulated solar radiation, the difference of the global solar radiation calculated using the 3D camera was 176.70 MJ (solar radiation with 7 days; suppose daily accumulated solar radiation 26 MJ) on an average and a maximum of 439.90 MJ (solar radiation with 17.5 days).

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.202-212
• /
• 2010

The purpose of this study is at clarifying what the genre oriented characteristics of virtual reality programs are. For this, the tests of 'We Are Married' being broadcasted in 'Sunday, Sunday Night' Part 1 of MBC from episode 1 to 8. As a result of analysis, this program was mixing together virtuality and reality by placing the image of virtual couple's life and presentness of entertainers existing in reality appearing at the studio. Also, it was forming sympathy with users as it satisfies fantasy and sense of reality toward marriage by the entertainer couples showing love and conflict that may happen between real couples after setting various categories of couple types. Also, through the device for the public space to confess private feelings through television, it shows the boundary between public domain and private domain breaking up. Along with this, it has implemented amusement characteristics by inspiring enjoyment of users by a substituted satisfaction through various forms of impressions presented to spouse such as materials, effort, gesture or language, etc. Accordingly, the virtual reality program shows authenticity, fiction and amusement by being mixed together and we can see that such genre oriented characteristics act as important strategy appealing to users based on breakup of boundary and genre oriented ambiguity.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.825-830
• /
• 2010

Generally, the copy protection mark and 2D bar-code techniques are widely used for forgery protection in printed public documents. But, it is hard to discriminate truth from the copy documents by using exisiting methods, because of that existing 2D-barcode is separated from the copy protection mark and it can be only recognized by specified optical barcord scanner. Therefor, in this paper, we proposed the forgery protection tehchnique for discriminating truth from the copy document by using watermark inserted 2D-barcord, which can be accurately distinguished not only by naked eye, but also by scanner. The copy protection mark consists of deformed patterns that are caused by the lowpass filter characteristic of digital I/O device. From these, we verified the performance of the proposed techniques by applying the histogram analysis based on the original, copy, and scanned copy image of the printed documents. Also, we suggested 2D-barcord confirmation system which can be accessed through the online server by using certification key data which is detected by web-camera, cell phone camera.

• Korean Journal of Childcare and Education
• /
• v.9 no.5
• /
• pp.437-460
• /
• 2013

The purpose of this study was to examine the image perceived by fathers of children with Internet addiction. To achieve the study purpose, we conducted depth interviews with ten fathers of children with Internet addiction who had been diagnosed as At-Risk through a face to face meeting. The reason for choosing face to face interviews was to listen to the subjective stories and descriptions from fathers about the kind of fathers they are, which are felt and experienced in real life. More specifically, we selected the depth-interview methods through structured questions and non-structured questions. The interviews were held for two or three hours through an individual meeting of ten fathers and data were collected in order to conduct a categorical analysis. The figures discovered from fathers of children were divided into four categories; the father figure who is indifferent to the Internet use of his child, the father figure depending only on education through the Internet, the father figure who is in a weaker point than the Internet and the father figure who is addicted to the Internet. Based on the study results, we suggested the desirable behaviors, which may be useful for both fathers and children with Internet addiction as well as a follow-up study.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.12
• /
• pp.561-570
• /
• 2015

With the advance of IT technology, contents from digital multimedia devices and softwares are widely used and distributed. However, novice uses them for illegal purpose and hence there are needs for protecting contents and blocking illegal usage through multimedia forensics. In this paper, we present a forensic technique for identifying digital imaging source using sensor pattern noise. First, the way to acquire the sensor pattern noise which comes from the imperfection of photon detector against light is presented. Then, the way to identify the similarity of digital imaging sources is explained after estimating the sensor pattern noises from the reference images and the unknown image. For the performance analysis of the proposed technique, 10 devices including DSLR camera, compact camera, smartphone and camcorder are tested and quantitatively analyzed. Based on the results, the proposed technique can achieve the 99.6% identification accuracy.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.222-226
• /
• 2009

The objective of this study is to share multimedia contents included in existing digital devices and to solve the problems of an increase in installation fees and non-environmentally friendly interiors. This study designed a new digital signal transmitter and receiver using power line transmission and HDMI in order to solve the problems in the existing systems. The transmitter and receiver designed in this study used an AD9867BCPZ PLC chip in which the transmission came from digital signals originating in a PC, and the system architecture was configured so that the outputs signals were connected to a TV from the receiver. The experiment was implemented by adding a Video Test Generator, a USBPre external sound card, and Smaart Live 6 for analyzing the characteristics of the configured system. In the video test results, it was verified that communication was actively implemented, and the image quality showed a constant level from the measurement of the captured video. In the case of the sound, it was verified that more than 90% of the sound signals were normally transmitted and received from the examination of their phases and magnitudes. Thus, the performance of the system designed in this study was verified, which leads to the resolution of some of the problems found in current digital devices.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.169-174
• /
• 2007

The purpose in having a control rod an a buoy system is to control the motion of it. The system may be composed entirely af a single circular cylinder finder and a lang mooring anchor cable. A control rod has one function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of the effects of mutual interference, then determine the stability characteristics of the body. In this paper, the study of control-rod-attached buoy's 2-dimensional section was accomplished. model tests and numerical simulations had been carried out with different diameters of control rods. and varying the Reynolds number $Re=5,000{\sim}25,000$ based an the cylinder diameter(D=50mm) to. predict the performance af the body and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flaw field 50mm circular cylinder had been used during the whale experiments and measured results had been compared with each other.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.571-576
• /
• 2015

This paper presents a comparative study of wave height estimation method that was used for signal to noise ratio and shadowing ratio based on X-band marine radar. If the signal to noise ratio, and is widely used as a method for estimating an wave height, a new method is presented for shadowing ratio. In the case of radar images used in this study it is measuring the data from the coast of Ulsan Jujeon, compared with marine meteorological information from the Meteorological Agency measured a light beacon. We compared the measured data for about 34 days, the typhoon was measured, incluidng a period in the East Sea, and verify the results for various distribution of wave height. For estimate wave height using a shadowing ratio analysis, it does not require calibration and real-time advantages of this part, coming confirmed the possibility of the measurement, the cause detection error for radar image was caused due to determine.

• Smart Structures and Systems
• /
• v.26 no.3
• /
• pp.277-290
• /
• 2020

Disasters, including earthquakes and landslides, have enormous economic and social losses besides their impact on environmental disruption. Iran, and particularly its Western part, is known as an earthquake susceptible area due to numerous strong ground motions. Studying ecological changes due to climate change can improve the public and expert sector's awareness and response to future disastrous events. Synthetic Aperture Radar (SAR) data and Interferometric Synthetic Aperture Radar (InSAR) technologies are appropriate tools for modeling and surface deformation modeling. This paper proposes an efficient approach to detect ground deformation changes using Sentinel-1A. The focal point of this research is to map the ground surface deformation modeling is presented using InSAR technology over Sarpol-e Zahab on 25^th November 2018 as a study case. For surface deformation modeling and detection of the ground movement due to earthquake SARPROZ in MATLAB programming language is used and discussed. Results show that there is a general ground movement due to the Sarpol-e Zahab earthquake between -7 millimeter to +18 millimeter in the study area. This research verified previous researches on the advanced image analysis techniques employed for mapping ground movement, where InSAR provides a reliable tool for assisting engineers and the decision-maker in choosing proper policies in a time of disasters. Based on the result, 574 out of 682 damaged buildings and infrastructures due to the 2017 Sarpol-e Zahab earthquake have moved from -2 to +17 mm due to the 2018 earthquake with a magnitude of 6.3 Richter. Results show that mountainous areas have suffered land subsidence, where urban areas had land uplift.