• 전자공학회논문지 IE
• /
• v.48 no.1
• /
• pp.51-56
• /
• 2011

In this paper, a variety of digital image processing technique was applied to improve the quality of medical images which is a chest CR image. And the image quality was performed. On the other hand, the high-frequency emphasis filtering and the histogram equalization were realized by MATLAB programs to better the contrast of the chest CR image. As a result of simulation, the sharpness of the original image was elevated by the high-frequency emphasis filtering and the histogram equalization. To evaluate the degree which is improved the image quality by the digital image processing, the subjective evaluation is used by the observation of the image. The sensitivity which is the probability to find a signal or a lesion is calculated. The sensitivity of the image performed the high-frequency emphasis filtering and the histogram equalization became more improved than that of the original and the digital image processing performed in the medical image improved the quality of the image.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.520-525
• /
• 1992

This paper reports several mathematical properties of the filter vector developed for processing linearly-additive spatially-invariant image sequences. In this filtering of an image sequence into a single filtered image, the information about the image components originally distributed over the entire sequence is compressed into the one new image in a way that the desired component is enhanced and the undesired (interfering) components and noise are suppressed.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1292-1304
• /
• 2012

Recently, digital images are extremely forged by editors or advertisers. Also, amateurs can modify images throughout easy editing programs. In this study, we propose identification and analytical methods for the modified images to figure out those problems. In modified image analysis, we classify two parts; a filtering change and a geometric change. Those changes have an algorithm based on interpolation so that we propose the algorithm which is able to analyze a trace on a modified area. With this algorithm, we implement a detection map of interpolation using minimum filter, laplacian algorithm, and maximum filter. We apply the proposed algorithm to modified image and are able to analyze its modified trace using the detection map.

• Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.113-118
• /
• 2015

An important problem in low-dose CT is the image quality degradation caused by photon starvation. There are a lot of algorithms in sinogram domain or image domain to solve this problem. In view of strong self-similarity contained in the special sinusoid-like strip data in the sinogram space, we propose a novel non-local filtering, whose average weights are related to both the image FBP (filtered backprojection) reconstructed from restored sinogram data and the image directly FBP reconstructed from noisy sinogram data. In the process of sinogram restoration, we apply a non-local method with smoothness parameters adjusted adaptively to the variance of noisy sinogram data, which makes the method much effective for noise reduction in sinogram domain. Simulation experiments show that our proposed method by filtering in both image and projection domains has a better performance in noise reduction and details preservation in reconstructed images.

• Korean Journal of Remote Sensing
• /
• v.2 no.2
• /
• pp.79-94
• /
• 1986

TM data, which have better resolution in spatial and spectral than MSS data, were used for this study, and several Image Processing Techniques (IPT) were examined for finding the best IPT to fit to lineament extraction and mineralized zone mapping. The Ryeongnam area was selected as test area, because the area is one of major mineralized zones in Korea and its hydrothermal alteration zone is wider and deeper than other areas. The spatial filtering method is most optimum one for limeament extraction: that is, the directional spatial filtering is most efficient to detect N-S, E-W direction lineaments on the image, and the high boost filtering can be applied for mapping all direction lineaments. The ratio method was selected for detecting altered zone. It is possible to make several tens combinations in ratio with 7 bands of TM data, but considering spectral characteristics of each band of TM to the geological meterials and vegetation, the band 4/band 3(A), band 5/band 7(B), and B/A ratio methods were chosen among them. The 5/7 ratio image did not show clearly the altered area due to noise from vegetation cover, so the 4/3 ratio imae was used for trying to decrease the effect of vegetation. As a result the B/A ratio image showed quite nicely the altered zone of the test area. In conclusion, the spatial filtering is the best image processing techniques for lineament mapping, and the B/A ratio image in TM data is useful for the mineralized zone mapping.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.453-458
• /
• 2019

In this study we analyzed the tendency of the image characteristic by changing filtering factor for the proposed fast non local means (FNLM) noise reduction algorithm with designed Male Adult mesh (MASH) phantom through Geant4 application for tomographic emission (GATE) simulation program. To accomplish this purpose, MASH phantom for human copy was designed through the GATE simulation program. In addition, we acquired degraded image by adding Gaussian noise with a value of 0.005 using the MATALB program in MASH phantom. Moreover, in degraded image, the FNLM noise reduction algorithm was applied by changing the filtering factors, which set to 0.005, 0.01, 0.05, 0.1, 0.5, and 1.0 value, respectively. To quantitatively evaluate, the coefficient of variation (COV), signal to noise ratio (SNR), and contrast to noise ratio (CNR) were calculated in reconstructed images. Results of the COV, SNR and CNR were most improved in image with a filtering factor of 0.05 value. Especially, the COV was decreased with increasing filtering factor, and showed nearly constant values after 0.05 value of the filtering factor. In addition, SNR and CNR were showed that improvement with increasing filtering factor, and deterioration after 0.05 value of the filtering factor. In conclusion, we demonstrated the significance of setting the filtering factor when applying the FNLM noise reduction algorithm in degraded image.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.3
• /
• pp.7-10
• /
• 2007

We propose an image filtering technique that removes various image styles. To destylize a given image, we define image styles as repeated patterns existing in the image. For dll pixels of the image, we compute image styles as style vectors. We remove image styles by using bilateral filtering based on these style vectors. Destylization results show well smoothed images while preserving feature boundaries. Our method effectively removes image styles and reveals image structures clearly, and results can be applied to several applications such as texture transfer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.113-122
• /
• 2016

In this paper, we suggest a approach which comprises fast Fourier transform inversion by wavelet noise attenuation. It represents an inverse filtering by adopting a factor into the Wiener filtering, and the optimal factor is chosen to minimize the overall mean squared error. in order to apply the Wiener filter, we have to compute the power spectrum of original image from the corrupted figure. Since the Wiener filtering contains the inverse filtering process, it expands the noise when the blurring filter is not invertible. To remove the large noises, the best is to remove the noise using wavelet threshold. Wavelet noise attenuation steps are consisted of inverse filtering and noise reduction by Wavelet functions. experimental results have not outperformed the other methods over the overall restoration performance.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.43-48
• /
• 2011

Among various methods proposed earlier, fuzzy image filtering is usually one of the favored techniques because it has less blurring effect and the decrease of noise removal rate after filtering. However, fuzzy filtering is ineffective on color images since it is firstly developed with gray scale. Thus, in this paper, we propose a fuzzy filtering algorithm for color images. First, we divide RGB color information from image into three channels of R, G, and B and judge the possibility of each pixel with mask by fuzzy logic independently. The output pixel value might be the average or median according to the degree of noise. Our experiment successfully verifies the effectiveness of new algorithm in color image.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.95-100
• /
• 2011

This paper proposes a new method of vehicle brake lights detection and recognition using an R-filtering. Firstly, the proposed method processes the R-filtering with the first input image and then with the second one in order to detect brake lights. Secondly, the method counts the number of red pixels and computes the mean value in each R-filtered image. The difference rates between the numbers of the red pixels and between the mean values of two images are defined in this paper. Through the analysis of the difference rates, it can recognize whether brake lights are turned on or off, and whether the vehicle ahead is being approached or not. The proposed method is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithm is quite successful.