• 제목/요약/키워드: Image Separation

검색결과 388건 처리시간 0.024초

CHEMICAL SHIFT IMAGING

  • 이윤;김민기
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 추계학술대회
    • /
    • pp.22-25
    • /
    • 1992
  • 화학적 이동성을 이용하여, 생체의 경우 지방질의 영상 혹은 물성분의 영상을 얻을 수 있다. 여러 가지 기술을 사용하여 분리된 성분의 자기공명 영상을 얻었다. Dixon의 방법은 두 번의 영상실험을 하여 지방질 영상과 물성분 영상을 구분할 수 있으며, 부분적 자기장의 불균질성에 영향을 적게 받고 다층 영상법에 용이하게 적용할 수 있다. CHESS와 SECSI 방법은 한번의 영상실험으로 물 또는 지방질 영상을 획득할 수 있다. 그러나 부분적 자기장의 불균질성에 영향을 많이 받으며, 다층영상법에 적용하기에는 어려운 점이 있다. 화학 성분의, 즉 지방질과 물성분의 분리의 척도가 되는 지방질 신호대 물성분신호 비에 있어 SECSI 방법이 가장 우수함을 보였다.

  • PDF

구순열 환자 코변형(Cleft Lip Nose Deformity) 영상의 통계적 평가 (Statistical Evaluation of the Cleft Lip Nose Deformity Image)

  • 김진태;남기창;홍현기;나동균;김덕원
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제54권8호
    • /
    • pp.517-520
    • /
    • 2005
  • Cleft lip is a congenital deformity condition with separation of the two sides of the lip and results in nose deformity Evaluation of surgical corrections and outcome assessments in nose deformity resulting from the cleft lip depend mainly on doctor's objective judgment. Development of an objective assessment tool in evaluation of the condition and surgical outcome of cleft lip nose deformity patients will help in advancement and evaluation of surgical techniques of cleft lip. Hence, our study aimed at quantitative assessment of a cleft lip nose deformity condition by comparing following parameters gathered from a photographic image of a cleft lip patient: (1) angle difference between two nostril axis, (2) center of the nostril and distance between two centers, (3) overlapped area of two nostrils and (4) the overlapped area ratio of two nostrils. Assessment results of the nose deformity were determined by statistical analysis of evaluation results from three experienced plastic surgeons. In addition, regression model was developed using correlation relationship and factor analysis of parameters from results of the image analysis

타이포그래피를 이용한 현대패션의 유형과 미적 특성 (Pattern and Aesthetic Characteristics of Modem Fashion using Typography)

  • 김선영
    • 복식문화연구
    • /
    • 제17권2호
    • /
    • pp.283-295
    • /
    • 2009
  • This research covers the ways in which typography, which has been expressed in a diverse range of fields and changed communication functions from the era of reading to the era of feeling according to the change in the times and social demands, has been represented in modem fashion, along with examining its inherent aesthetic characteristics. I reviewed the general information of typography's fundamental notions and functions through documented records, and analyzed the inherent aesthetic characteristics by examining the typographical patterns shown in modem fashion based on art works in domestic and international collections after 2000. The result of this research is that typography in modem fashion has been used for improving brand image, expressing social slogans, expressing images, linguistic function for playful expression and the interdependent relationships of modeling functions. Typography in modem fashion has always been diversely expressed harmoniously with linguistic and modeling functions. Through this, the aesthetic characteristics were firstly parodies through direct sentences addressing political and social ideologies, economic gaps, environmental issues and anti-war protests. Secondly, by using brand logos, typography was used as a commercial means like brand-image transfer and separation through customization of other brands. Thirdly, the aesthetic and artistic value of fashion were expressed after being used as experimental visual components like image, motive and patterns which are all elements of fashion design. Fourthly, by distortion and transformation of characters or childish decorations, along with the harmonization of words, cathartic humor was provided for the calloused senses of modern people.

  • PDF

독립 성분 분석을 이용한 얼굴인식 (Face recognition by using independent component analysis)

  • 김종규;장주석;김영일
    • 전자공학회논문지C
    • /
    • 제35C권10호
    • /
    • pp.48-58
    • /
    • 1998
  • 신호처리 분야에서 미지의 신호원 분리에 주로 응용되는 독립 성분 분석법을 이용하여 얼굴인식을 할 수 있는 한 방식을 제안하였다. 하나의 얼굴영상 자체가 통계적으로 서로 독립인 어떤 미지의 특징영상의 합으로 표현될 수 있다고 가정하고 이 특징영상을 독립성분분석을 이용하여 구한 후, 새로운 얼굴이나 변화된 얼굴을 특징영상의 공간에 투영시켜 투영된 성분을 기준 얼굴영상과 비교하는 방법으로 인식을 수행하였다. 변화가 심한 여러 얼굴영상으로 구성된 데이터베이스(한 사람 당 10개씩의 변화된 400개의 얼굴 영상)에 대해 얼굴인식 실험을 수행하였고 또한 주성분 분석에 기초한 고유얼굴을 이용한 인식률과 비교 분석하였다. 제안된 방식은 주성분 분석법에 비해 높은 인식률을 제공하며, 특히 입력 얼굴 영상에 첨가되는 랜덤 잡음에 대단히 강한 특성을 갖는다.

  • PDF

Particle image velocimetry measurement of complex flow structures in the diffuser and spherical casing of a reactor coolant pump

  • Zhang, Yongchao;Yang, Minguan;Ni, Dan;Zhang, Ning;Gao, Bo
    • Nuclear Engineering and Technology
    • /
    • 제50권3호
    • /
    • pp.368-378
    • /
    • 2018
  • Understanding of turbulent flow in the reactor coolant pump (RCP) is a premise of the optimal design of the RCP. Flow structures in the RCP, in view of the specially devised spherical casing, are more complicated than those associated with conventional pumps. Hitherto, knowledge of the flow characteristics of the RCP has been far from sufficient. Research into the nonintrusive measurement of the internal flow of the RCP has rarely been reported. In the present study, flow measurement using particle image velocimetry is implemented to reveal flow features of the RCP model. Velocity and vorticity distributions in the diffuser and spherical casing are obtained. The results illuminate the complexity of the flows in the RCP. Near the lower end of the discharge nozzle, three-dimensional swirling flows and flow separation are evident. In the diffuser, the imparity of the velocity profile with respect to different axial cross sections is verified, and the velocity increases gradually from the shroud to the hub. In the casing, velocity distribution is nonuniform over the circumferential direction. Vortices shed consistently from the diffuser blade trailing edge. The experimental results lend sound support for the optimal design of the RCP and provide validation of relevant numerical algorithms.

아두이노 키트를 이용한 주야간 침입자 움직임 감지 시스템 구현 (The Implementation of Day and Night Intruder Motion Detection System using Arduino Kit)

  • 한영오
    • 한국전자통신학회논문지
    • /
    • 제18권5호
    • /
    • pp.919-926
    • /
    • 2023
  • 본 논문에서는 주야간 움직임 감지 시스템 개발을 위한 주야간 촬영이 가능한 카메라 시스템을 구현하였다. 이를 위해 CMOS 이미지 센서는 물론 IR-LED를 이용하여 야간에도 선명한 영상 캡처가 가능하도록 설계하였다. 또한 칼라모델 분리를 통해 비교적 단순한 움직임 감지 알고리즘을 제안하였다. 칼라모델에서 H채널만 추출한 후, 영상을 블럭으로 나눈 다음 연속 프레임간의 평균 색상값을 이용하여 블록 매칭방식을 적용함으로써 움직임을 감지할 수 있다. 촬영 중 움직임이 감지되면 자동으로 경보음이 울리면서 화면을 캡처하여 PC에 저장할 수 있는 주야간 움직임 감지 시스템을 구현하였다.

나선형 부유 고분자 여재의 Coalescence 특성을 이용한 비점오염원 저감시설의 유수분리특성 연구 (A Study on the Characteristics of Oil-water Separation in Non-point Source Control Facility by Coalescence Mechanism of Spiral Buoyant Media)

  • 강성원;김석구;김영임;윤상린;김수해;김미경
    • 대한환경공학회지
    • /
    • 제29권8호
    • /
    • pp.950-955
    • /
    • 2007
  • 본 연구에서 개발한 시스템은 기존에 사용되던 유수분리기를 유류가 혼입되어 발생하는 도로, 교량 등의 도시 불투수면 비점 오염저감장치로 업그레이드한 것으로서 유적입자가 coalescence 원리에 의하여 고밀도 고분자 폴리에틸렌 소재를 사용하여 제작된 메디아의 표면과 공간 사이를 타고 이동하면서 합체되어 유적의 크기가 증가한 후 부상하여 제거되는 기전과 SS 성분의 고형물이 침전에 의해 제거되는 원리를 이용한 도시 비점오염저감시설이다. 따라서 본 연구에서는 coalescence 기전을 통해 유수분리가 일어나는 나선형 고분자 여재의 유수분리 특성을 image analysis를 통해 규명하였으며 또한 도로노면 먼지와 폐엔진오일을 이용하여 비점오염원 저감시설에 유입되는 폐수를 모사하여 비점오염원 저감시설의 유수분리 성능을 실험하였다. 연구에 사용된 여재는 부정형의 투명한 나선형 구조를 갖고 있으며, SEM 사진 및 BET 측정 결과 매끄러운 표면 특성을 나타내고 있다. 직접 측정 방법으로 여재의 표면적을 측정한 결과, 여재 1립당 표면적은 1,428 $mm^2$으로 나타났으며, 단위당 중량은 45.3 $kg/m^3$으로 조사되었다. 또한 폐수 내 기름 입자의 액적크기를 현미경으로 촬영하여 이미지 분석을 수행한 결과, 메디아를 통한 폐수내 기름성분의 제거가 coalescence에 의해 일어나고 있음을 증명하였다. 마지막으로 나선형 부유 메디아를 적용한 비점오염저감시설의 성능평가 결과, 유량에 따라서 부유성 고형물은 $86.6\sim95.2%$, $COD_{Cr}$, $87.3\sim95.4%$, n-Hexane 추출물 $71.8\sim94.8%$의 제거효율을 나타내어 본 장치의 처리성능은 기존의 비점오염원 저감시설의 처리대상물질인 유기물과 부유물질 뿐만 아니라 유류의 제거에도 효과적인 것으로 평가되었다.

광학 현미경을 이용한 산화 그래핀 이미지 분석 조건에 관한 연구 (A Study on Image Analysis of Graphene Oxide Using Optical Microscopy)

  • 이유진;김나리;윤상수;오영석;이제욱;이원오
    • Composites Research
    • /
    • 제27권5호
    • /
    • pp.183-189
    • /
    • 2014
  • 광학 현미경 관찰을 통해 산화 그래핀의 형상, 크기 및 두께를 쉽게 파악할 수 있는 광학 관찰을 위한 최적 조건을 확보하고자 하였다. 본 연구에서는 $SiO_2$ 절연막이 300 nm 두께로 도포된 실리콘 기판 위의 산화 그래핀을 하이드라진 증기 환원을 통하여 본래의 모폴로지를 유지한 채 환원된 산화 그래핀의 이미지의 선명도를 증가시켰고, 녹색 필터를 사용한 관찰을 통해 이미지의 대비값을 보다 증대시켰다. 추가적으로 얻어진 광학 이미지를 RGB 채널별로 분리하는 방법을 제안하고 이를 통해 이미지를 분석하였다. 그 결과 하이드라진 증기 환원 처리 및 녹색 파장에서의 광원 하에서 고대비의 이미지 확보가 가능하였으며, 더불어 광학 이미지의 RGB 채널 분리만으로도 선명한 그래핀 이미지를 얻을 수 있음을 알아내었다.

3차원 물체 부근에 위치한 특이점이 물체에 작용하는 힘 (Force upon a Body due to Neighboring Singularity)

  • 최진영;이승준
    • 대한조선학회논문집
    • /
    • 제54권3호
    • /
    • pp.250-257
    • /
    • 2017
  • It is desirable to have a way to predict the pressure drag due to various appendages attached to stern. As a mathematical model for these, a sphere and a singularity behind it, both in the uniform flow can be considered. We may use the Butler's sphere theorem to find the Stokes' stream function when the resulting flow is axisymmetric, and then the extended Lagally's theorem to get the force upon the sphere due to the singularity. Assuming the separation distance between the sphere and the singularity is small, the leading order approximation for the force is obtained and it is found out that if the separation distance and the square root of the strength of the dipole are of the same order, the effect of the image of the dipole with respect to the sphere is the most important.

변형 Karhunen-Loeve 변환의 수리형태학적 의미와 칼라 영상처리에의 응용 (Morphological Interpretation of Modified Karhunen-Loeve Transformation and Its Applications to Color Image Processing)

  • 어진우
    • 전자공학회논문지B
    • /
    • 제31B권11호
    • /
    • pp.97-108
    • /
    • 1994
  • 대상물체와 배경으로 이루어진 다변수 신호를 분리시키기 위한 변환 기법의 하나로 두 샘플 공분산 행렬의 정규화 후 동시 대각화를 이용한 변형된 Karhunen-Loeve 변환 기법이 제안되었다. 두 클래스간의 샘플 공분산비를 최대화함으로써 국소적 데이터 구조를 분리하는 이 변환 기법은 수리형태학적 연산자를 비롯한 인접 화소 연산자를 사용하는 다변수 영상처리 알고리듬의 전처리 변환으로 유망한 기법이라는 것을 보였다. 제안된 기법이 가지는 분리성은 수리형태학적 패턴 스펙트럼에 근거하여 제안된 measure인 ‘평균높이’의 개념과 관련시켜 해석하였다. 그리고 변환 기법에 대한 실용적인 구현 알고리듬과 이론적인 결과를 모의실험을 통하여 확인하였다.

  • PDF