• Journal of Information Display
• /
• v.2 no.2
• /
• pp.13-21
• /
• 2001

We propose a universal image processor for a-Si TFT LCD of UXGA class that can display the full screen on the LCD panel with low resolution of video sources such as NTSC, VGA, SVGA, XGA, and SXGA by using the proposed interpolation filter. In addition, we propose a real-time contrast controller for image improvement of multi-gray scale image. The operation of the proposed methods has been verified using Synopsys VHDL and computer simulation. Results show that the proposed methods might be suitable for a UXGA LCD controller for real-time image improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.970-979
• /
• 1993

In this paper, a multi-function processor unit is implemented for binary image processing. This unit consists of a set of address generatior, window pipeline register, look up table, control unit, and two local memories .The merits of multi-function processor unit are more simpler than basic SAP and improved disposal speed. A simple software selection give the various choices of image sizes and it can process the function of smoothing, thinning, feature extraction, and edge detection, selectively or sequentially.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.529-532
• /
• 2005

In this paper, we propose a motion picture processor for CSTN LCD. In order to eliminate flicker phenomenon, the proposed processor suggests a new driving scheme, SFP(Subgroup Frame Pattern). We use an input image compression methode from RGB(:8:8;8) to RGB(5:6:5) to improve quality of the image and apply the image to CSTN Module. The proposed hardware architecture has been implemented and verified using a FPGA on prototype board. The proposed Algorithm provide a lower computational complexity. Therefore the processor can be used in the display devices such as PDA, mobile phone and PMP(Portable Multimedia Player).

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1449-1453
• /
• 1987

A microprogrammable Bit Slice Sinal Processor for image processing is implemented. Processing speed is increased by the parallelism in horizontal microprogram using 120bits microcode, pipelined architecture, 2 bank memory switching that interfaces with the Host through DMA, a variable clock control, overflow checking H/W,look-up table method and cache memory. With this processor, a DCT algorithm which uses 2-D FFT is performed. The execution time for $512{\times}512{\times}8$ image is 12 sec when 16 bit operation is runned, and the recovered image has acceptable quality with MSE 0.276%.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.682-685
• /
• 2002

In this paper, we defined necessary operations and functional blocks of a multiplexer for 3-D video systems and present our multiplexer design. We adopted the ITU-T's recommendation(H.222.0) to define the operations and functions of the multiplexer and explained the data structures and details of the design for multiview image processing. The data structure of TS(Transport Stream) and PES (Packetized Elementary Stream) in ITU-T Recommendation H.222.0 does not fit our multiview image processing system, because this recommendation is fur wide scope of transmission of non-telephone signals. Therefore, we modified these TS and PES stream structures. The TS is modified to DSS(3D System Stream) and PES is modified to SPDU(DSS Program Data Unit). We constructed the multiplexer through these modified DSS and SPDU. The number of multiview image channels is nine, and the image class employed is MPEG-2 SD(Standard Definition) level which requires a bandwidth of 2∼6 Mbps. The required clock speed should be faster than 54(= 6 ${\times}$ 9)㎒ which is the outer interface clock speed. The inside part of the multiplexer requires a clock speed of only 1/8 of 54㎒, since the inside part of the multiplexer operates by the unit of byte. we used ALTERA Quartus II and the FPGA verification for the simulation.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.350-357
• /
• 2005

This paper presents a mechanical sensorless vector-controlled system with parameter identification by the aid of image processor. Based on the flux observer and the model reference adaptive system method, the proposed sensorless system includes rotor speed estimation and stator resistance identification using flux errors. Since the mathematical model of this system is constructed in a synchronously rotating reference frame, a linear model is easily derived for analyzing the system stability, including motor operating state and parameter variations. Because it is difficult to identify rotor resistance simultaneously while estimating rotor speed, a low-accuracy image processor is used to measure the mechanical axis position for calculating the rotor speed at a steady-state operation. The rotor resistance is identified by the error between the estimated speed using the estimated flux and the calculated speed using the image processor. Finally, the validity of this proposed system has been proven through experimentation.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.26-31
• /
• 2016

In this paper, we propose an image quality evaluation system for compact camera module and assess the effect of optical performance improvement for proposed anti-halation disk in small lens. We develop a image quality evaluation system for quality estimation of camera module image. And we also develop a program to control register in image signal processor. Finally the resolution, brightness, and color reproduction performances were evaluated image quality comparison between conventional and proposed camera module using developed quality evaluation system and ISP register control program.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.243-250
• /
• 1996

Data acquisition system mounted on the Solar Flare Telescope at Bohyunsan Optical Astronomy Observatory is briefly described. The system is made up with CCD cameras, an image processor, a PCI-type PC and a SUN workstation. The image processor, MVC 150/40 comprises a variable scan acquisition module, an image manager and a binary correlator computational module. A typical polarization image of a sunspot is presented to demonstrate performance of the system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.103-111
• /
• 2007

In this paper, we propose a VLSI architecture of hardware optimized high quality image signal processor for a Single-chip CMOS Image Sensor(CIS). The Single-chip CIS is usually used for mobile applications, so it has to be implemented as small as possible while maintaining the image quality. Several image processing algorithms are used in ISP to improve captured image quality. Among the several image processing blocks, demosaicing and image filter are the core blocks in ISP. These blocks need line memories, but the number of line memories is limited in a low cost Single-chip CIS. In our design, high quality edge-adaptive and cross channel correlation considered demosaicing algorithm is adopted. To minimize the number of required line memories for image filter, we share the line memories using the characteristics of demosaicing algorithm which consider the cross correlation. Based on the proposed method, we can achieve both high quality and low hardware complexity with a small number of line memories. The proposed method was implemented and verified successfully using verilog HDL and FPGA. It was synthesized to gate-level circuits using 0.25um CMOS standard cell library. The total logic gate count is 37K, and seven and half line memories are used.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.65-72
• /
• 2005

This paper proposes an image display system that reduces the core performance of the processor allocated in the image display, thereby enabling the use of a less expensive processor with a low performance. Essentially, the proposed system supports an image display function for a high resolution in the module of an electronic picture frame (EPF) using a low-performance processor based on converting high definition (HD) image data at a 15Hz frame rate into HD image data at a 60Hz frame rate for use in a digital TV system. As a result, the proposed system can reduce the processor performance to a level corresponding to an image display with a low frame rate, thereby reducing the product cost and allowing various additional functions. Finally, the proposed system is implemented to confirm effectiveness.