• Journal of Korea Multimedia Society
• /
• v.18 no.12
• /
• pp.1555-1561
• /
• 2015

This paper tries to converge computer and art by applying anamorphosis principle in drawing technique to mobile application. As comparing to current anamorphosis which shows one image at the round cup, we focus on the variability which shows several variable images at the mobile device according to the color board. The usage of the proposed algorithm is able to extended to various areas such as souvenir and public relation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.274-274
• /
• 2000

In the future, the convenient speech command system will become an widely-using interface in automation systems. But the previous research in speech recognition didn't give satisfactory recognition results for the practical realization in the noise environment. The purpose of this research is the development of a practical system, which reliably recognizes the speech command of the registered users, by complementing an existing research which used the image information with the speech signal. For the lip-reading feature extraction from a image, we used the DWT(Discrete Wavelet Transform), which reduces the size and gives useful characteristics of the original image. And to enhance the robustness to the environmental changes of speakers, we acquired the speech signal by stereo method. We designed an economic stand-alone system, which adopted a Bt829 and an AD1819B with a TMS320C31 DSP based add-on board.

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.79-85
• /
• 2006

Temperature of board surface was monitored during drying using an IR image measurement system. Boards were water-saturated and dried at the levels of four temperatures and three air velocities. At higher DB the surface temperature increased more steeply and level off period was significantly short. At the DB temperatures of 70, 80, $90^{\circ}C$ the period where the surface temperature was equivalent to WB temperature was constant regardless of air velocity while at $60^{\circ}C$ it decreased as air velocity increased. It was confirmed that a surface transfer coefficient increased with DB temperature. Variation of temperature profile on a wood surface increased with DB temperature and air velocity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.504-509
• /
• 1994

Recently SMT is used widely to place the SMD on bare board which is very small and highly integrated. And that is one of the issue directly in the electric products assembly process and especiallly in the field of optimizing electric product's performance, automatically tuning method which is highly demanded in the electronics industry. To tune product's performance, variable resistances's resistivity should be changed until it has good performance characteristics. In this paper to automatically regulate the 8mm camcoder's performance, it is proposed variable resistence's center position and orientation detection algorithm by image processing, which has very precise and accurate result. And we found optimal conditions which can have effects on image acquisition process. And real time processing is done by DSP to detect vr's center and orientation. This results make it possible to utilize proposed image processing algorithm and system directly in electronics industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.682-687
• /
• 2000

EMI problem is very important in a printed circuit board design. This paper deals with image plane as one of the most effective method to reduce EMI in PCB. The shielding performance of one and two layers of image planes of finite width and length is analyzed by the method of moments based on the triangular surface patch model. The current distributions were modeled as two simple line sources. It is demonstrated that proper triangulation should be made so as to take two basis functions in the boundary triangles of the surface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1885-1896
• /
• 1996

This paper describes the implementation of the AVT(Automatic video Tracker) using ASIC. The basic tracking algorithm is based on the spatio-temporal gradient method, and adaptive window sizing, track state decision algorithm were also realized. Newly developed ASIC performs recursive image filtering, extraction of spatio-temporal gradient/gradient functions of image in field rate. Using the FPGA/ASIC, the tracker was simply realized in one board type which can be easily applied to various image system. We conformed ASIC operation by computer simulation and tested the system in real tracking situations. From the result, the system can track the moving target which has a velocity of 2-3 pixel/field and a size of varying from 2 to 128 pixes. Also fast refresh rateof motion estimation(60Hz) improves the characteristics of servoing system which forms feedback loop with the tracker.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.11
• /
• pp.1-7
• /
• 2016

In this paper, we proposed real-time relative radiometric calibration processing method for SWIR(Short Wavelength Infra-Red) sensor using 'Hyper-Spectral Imager'. Until now domestic research for Hyper-Spectral Imager has been performing with foreign sensor device. So we have been studying hyper spectral sensor device to meet domestic requirement, especially military purpose. To improve detection & identify capability in 'Hyper-Spectral Imager', it is necessary to expend sensing wavelength from visual and NIR(Near Infra-Red) to SWIR. We aimed to design real-time processor for SWIR sensor which can control the sensor ROIC(Read-Out IC) and process calibrate the image. To build Hyper-Spectral sensor device, we will review the SWIR sensor and its signal processing board. And we will analyze relative radiometric calibration processing method and result. We will explain several SWIR sensors, our target sensor and its control method, steps for acquisition of reference images and processing result.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.120-129
• /
• 2003

For successful establishment of the roughing CAM system based on reverse engineering, it is necessary to develop the measurement method for generation of roughing path from a physical footwear model. In this study, the development of the roughing path measurement system is presented. It consists of 3 CCD cameras, image acquisition board and the roughing path measurement algorithm. The 3 CCD cameras capture images of the sidewall and the bottom of the footwear and, from two images, the outer and inner lines are extracted using image-processing algorithm. The roughing path measurement algorithm generates the roughing path which is reflected on the change of resolution according to the distance between the CCD camera and the measured point. The experimental results show that the developed system can measure the roughing path within the allowable roughing error range.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.816-825
• /
• 2022

Nondestructive testing, which can monitor a product's interior without disassembly, is becoming increasingly essential for industrial inspection. Computed laminography (CL) is widely used in this application, as it can reconstruct a product, such as a printed circuit board, into a three-dimensional (3D) high-magnification image using X-rays. However, such high-magnification scanning environments can be affected by minute vibrations of the CL device, which can generate motion artifacts in the 3D reconstructed image. Since such vibrations are irregular, geometric corrections must be performed at every scan. In this paper, we propose a geometry calibration method that can correct the geometric information of CL scans based on the image without using geometry calibration phantoms. The proposed method compares the projection and digitally reconstructed radiography images to measure the geometric error. To validate the proposed method, we used both numerical phantom images at various magnifications and images obtained from real industrial CL equipment. The experiment results confirmed that sharpness and contrast-to-noise ratio (CNR) were improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.48-51
• /
• 1997

This paper presents the algorithm of FIC inspection in chip mounter. When device is mounted on the PCB, it is impossible to get zero defects since there are many problems which can not be predicted. Of these problems, devices with bent corner leads due to mis-handling and which are not placed at a given point measured along the axis are principal problem in SMT(Surface Mounting Technology). In this paper, we proposed a new algorithm based on the Radon transform which uses a projection to inspect the FIC(Flat Integrated Circuit) device and compared this method with other algorithms. We measured the position error and applied this algorithm to our image processing board which is characterized by line scan camera. We compared speed and accuracy in our board.