• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.416-423
• /
• 2004

In this paper, an experimental verification of system identification technique for constructing finite element model is conducted for a three-story test structure equipped with an active mass driver (AMD). Twenty Gaussian white noises were used as the input for AMD, and the corresponding accelerations of each floor are measured. Then, the complex frequency response function (FRF) for the input, the force induced by the AMD, was obtained and subsequently, the Markov parameters and system matrices were estimated. The magnitudes as well as phase of experimentally obtained FRFs match well with those of analytically obtained FRFs.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.21-28
• /
• 2007

The goal of this paper is to represent a technique of fault detection for the control surface as a base research of the fault tolerant control system for safety improvement of UAV. The real-time system identification based on the recursive Fourier Transform was implemented for the fault detection of the control surface and verified through the HILS and flight test. The failures of the control surface are detected by comparing the control derivatives in fault condition with the normal condition. As a result from the flight test, we have confirmed that the control derivatives of fault condition less than normal condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1223-1228
• /
• 2006

This paper presents an experimental investigation of a recently developed Kronecker Product (KP) method to determine the type, location, and intensity of structural damage from an identified state-space model of the system. Although this inverse problem appears to be highly nonlinear, the system mass, stiffness, and damping matrices are identified through a series of transformations, and with the aid of the Kronecker product, only linear operations are involved in the process. Since a state-space model can be identified directly from input-output data, an initial finite element model and/or model updating are not required. The test structure is a two-degree-of-freedom torsional system in which mass and stiffness are arbitrarily adjustable to simulate various conditions of structural damage. This simple apparatus demonstrates the capability of the damage detection method by not only identifying the location and the extent of the damage, but also differentiating the nature of the damage. The potential applicability of the KP method for structural damage identification is confirmed by laboratory test.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.20-24
• /
• 2010

When the fire occurred in building, the fire-resistance-structure has to be constructed to prevent collapse of building and to have a time for evacuation of peoples. because of the features of the fireresistance test is similar with real scale, there is no way to confirm quality of fire-resistive-structure in building construction site. Therefore the purpose of this study, a study by spectroscopic analysis using near-infrared spectroscopy (NIR), is to suggest of useful and scientific testing-methods in building construction site by identification-analysis-study for fire resistive paint.

• Quality Improvement in Health Care
• /
• v.22 no.1
• /
• pp.71-90
• /
• 2016

Purpose: Objective of this study was to investigate how often nurses to perform patient safety activities. Methods: 521 observations were collected in 9 hospitals by 107 nursing students. Nurses' patient safety care activities were measured 0 (not at all) to 10 (all the time) scores. Descriptive statistics, independent t-test, one way ANOVA, correlation, multiple regression used to analyse data. Results: Items like 'Initial nursing assessment', 'drug management bring on', 'preparation for radiology test', 'falls assessment', 'nursing record' got high scores. But, scores of 'patient identification', 'verbal order management', 'hand hygiene' were lower than others. Each scores were different significantly according to institutions and departments. Within a same institution, the variance of scores, especially in 'patient identification', 'hand hygiene' were great. Scores of activities were different according to characteristics of institutions like type, location, number of beds, teaching hospital, number of accreditation, JCI accreditation. Predictors influencing nurses' patient safety activities were type, location and accreditation. These predictors account for 19.4% of variance. Conclusion: Performance of nurses' patient safety activities were different significantly according to characteristics of institutions. The important items like 'patient identification', 'hand hygiene' had achieved lowest performance. Further researches are needed to improve the basic safety activities.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.158-165
• /
• 2006

Although Mycobacterium tuberculosis complex strains remain responsible for the majority of diseases caused by mycobacterial infections worldwide, the increase in HIV infections has allowed for the emergence of other non-tuberculous mycobacteria as clinically significant pathogens. However, Mycobacterium species has a long period of incubation, and requires serious biochemical tests such as niacin, catalase, and nitrate test that are often tedious. The development of rapid and accurate diagnostics can aid in the early diagnosis of disease caused by Mycobacterium. The current DNA amplification and hybridization methods that have been developed target several genes for the detection of mycobacterial species such as hps65, 16S rDNA, rpoB, and dnaj. These methods produce rapid and accurate results. In this study, PCR-restriction fragment length polymorphism analysis(PCR-RFLP) based on the region of the rpoB gene was used to verify the identification of non-tuburculosis Mycobacterium species. A total of 8 mycobacterial reference strains and 13 clinical isolates were digested with restriction enzymes such as Msp I in this study. The results of using this process clearly demonstrated that all 13 specimens were identified by rpoB gene PRA method. The PCR-RFLP method based on the rpoB gene is a simple, rapid, and accurate test for the identification of Mycobacterium.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.772-780
• /
• 1998

The purpose of this research was to investigate the fiber content of and the characteristics of non-fibrous matters within the textiles exhumed from Keumreung-Ri, Pajoo of Kyunggi-do. Various microscopic methods' and the IR spectroscopy were used for the identification of fibers. The KS K 0251 Test Method as well as the IR spectroscopy and the SEM were used for the analysis of econ-fibrous matters. Fiber identification showed that each of the Pajoo samples were composed either of silk, cotton, or ramie. The results of the analysis of non-fibrous matters were as follows. The amount of water-extracted compound exceeded that of chloroform-extracted compound in both Pajoo 2 and Pajoo 5 samples. In Pajoo 5 sample which have already been dry cleaned using the mixed solution of n-hexane and n-dacane, the amount of chloroform extracted compound was 0% of the total extracted matter. The enzyme and HCI disintegration steps further removed the soils those were nonsoluble in water or chloroform. The most extraction was achieved at the HCI extraction stage.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.2
• /
• pp.45-53
• /
• 2004

In this paper, the stiffness and damping matrix are experimentally constructed using the structural modal information on frequencies, damping ratio and modal vectors, which are obtained by shaking table tests. Free vibration, harmonic and white noise vibration tests are performed. The acceleration of the shaking table was used as the input signal, and the corresponding accelerations of each floor were measured as output signals. The characteristics and limitations of modal information from each test are compared. The results of this study would be a basic resource of the analytical and experimental studies on the system identification of structures.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.151-168
• /
• 2014

UCI (Universal Content Identifier) as a national digital content identification system for identifying digital content and ICN (Integrated Copyright Number) for copyright management are operated by Korea copyright commission. However, They are not interoperable with international standard identification system such as ISRC (International Standard Recording Code), ISWC (International Standard Works Code), and ISAN (International Standard Audiovisual Number) due to lack of linkage system. Hence, extra works with international standard identification system are needed for international market entry and integrated management of statistical information including content settlement in international market is impossible. In this paper, the domestic/international identification systems are surveyed, and by metadata analysis of identification systems, linkage method with UCI/ICN is proposed. And also by developing the prototype model, research direction to UCI/ICN with international standard identification system is proposed.

• Korean Journal of Organic Agriculture
• /
• v.12 no.4
• /
• pp.451-461
• /
• 2004

In an animals, identification system has been widely used by ear tag with dummy code and blood typing for parernity. Also, genotyping methods were using for useful mean of individual identification for live animals. In the case of genotyping estimation of gene in population of korean native chicken. In this study, we tested for development of genetic markers used it possible to determination of individual identification system. The candidate genetic markers were used already bow 10 of microstalite DNA sequence information in chromosome No. 1 and 14. Result of analysis for genotyping, the number of alleles of those microstatelites DNA was shown minimal 3 to 12 and the heterozygote expression frequency range was shown from 0.617 to 0.862. In our result, effective number of allele for each microsatellites DNA was shown 3~7, and the accuracy of individual identification was shown nearly 100%, when used with 6 genetic marker. This study was about genotyping method for identification used specific genetic marker form microsatellite DNA in the brand marketing of korean native chicken. Our results suggest that genotyping method used specific genetic marker from microsatellite DNA might be very useful for determination of individual identification.