• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.519-526
• /
• 2001

The effects of methyl isobutyl ketone(MIBK)/ethanol(EtOH) solvent mixtures on the dispension, particle size distribution and rheology of $Al_2$O$_3$/ZrO$_2$ nonaqueous suspensions were investigated by measuring sedimentation density and viscosity. The sedimentation density of $Al_2$O$_3$ and ZrO$_2$ particles increased in MIBK-rich($\geq$60 vol%) solvents with 'Hypermer' KD-1 as a dispersant. The ball-milled suspensions in 80MIBK/20EtOH(vol%) solvent exhibited the narrow and unimodal particle size distribution. Although all Suspensions exhibited the Pseduo-Plastic flow(Shear thinning) the shear thinning behavior was somewhat different depending on the mixture ratio of $Al_2$O$_3$/ZrO$_2$ and MIBK/EtOH. Under a given shear rate( <300 s$^{-1}$ for $Al_2$O$_3$; <3000 s$^{-1}$ for ZrO$_2$) the strongest shear thinning appeared in the $Al_2$O$_3$ and ZrO$_2$ suspensions with pure MIBK solvent. The shear thinning was nearly independable on the mixture ratio of $Al_2$O$_3$/ZrO$_2$ in case of using the identical solvent(80MIBK/20EtOH, vol%).

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.525-543
• /
• 1998

This paper proposes a conceptual taxonomy of architectures far workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture？ Which of the components is represented as software modules of the workflow architecture？ And how are they configured and operating in the architecture？ The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and "global perspective" to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.

• The Journal of Information Technology and Database
• /
• v.5 no.1
• /
• pp.97-108
• /
• 1998

This paper proposes a conceptual taxonomy of architectures for workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture. Which of the components is represented as software modules of the workflow architecture\ulcorner And how are they configured and operating in the architecture\ulcorner The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and global perspective to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.06a
• /
• pp.43-49
• /
• 1998

Retardation effect of heavy metals in soils caused by adsorption onto the surfaces of solids particles is well known phenomena. The adsorption of metal ions has been recognized more strong in clay mineral and organic matter contents rather than sands and gravels. In this study, we investigated the retardation effect in two sandy soils by conducting batch and column tests. The column tests were conducted to obtain the relationship between concentration and time known as breakthrough curve (BTC). We applied pulse type injection of ZnCl$_2$solution on the inlet boundary and monitored the effluent concentration at the exit boundary under steady state condition using EC-meter and ICP-AES. Batch test consisted of an equilibrium procedure for fine fractions collected from two sandy soils for various initial ZnCl$_2$concentrations, and analysis of Zn ions in equilibrated solution using ICP-AES. The results of column test showed that i) the peak concentration of Zn analyzed by ICP was far less than that detected by EC-meter for both soils and ii) travel times for peak concentration were more less identical for two different monitoring techniques. The first result can be explained by ion exchange between Zn and other cations initially present in the soil particles since ICP analysis showed a significant amount of Ca, Mg ions in the effluent. From the second result, we found that retardation effect was not present in these soils due to strong cation exchange capacity of Zn ion over other cations since we did not apply a solution containing more adsorptive cations such as Al. The result of batch test also showed high distribution coefficients (K$_{d}$) for two soils supporting the dominant ion exchange phenomena. Based on the retardation factor obtained from the Kd, we predicted the BTC using CDE model and compared with the BTC of Zn concentration obtained from ICP The predicted BTC, however, disagreed with the monitored in terms of travel time and magnitude of the peak concentrations. The only way to describe the prominent decrease of Zn ion was to introduce decay or sink coefficient in the CDE model to account for irreversible decrease of Zn ions in liquid phase.e.

• ALGAE
• /
• v.34 no.1
• /
• pp.7-21
• /
• 2019

The genus Heterocapsa is one of the major dinoflagellate groups, with some of its species having worldwide distributions. However, prior to the present study, the phototrophic species Heterocapsa minima has been reported only from the northeast Atlantic Ocean. Recently, H. minima was found in the Korean waters, and a clonal culture was established. This culture was used to examine the morphology of the Korean strain H. minima HMMJ1604 through light and scanning electron microscopy, as well as for its genetic characterization. Furthermore, to determine the nationwide distribution of H. minima in Korea, its abundance was quantified in the waters of 28 stations in all four seasons in 2016-2018 using the quantitative real-time polymerase chain reaction method. The overall morphology of H. minima HMMJ1604 was very similar to that of the Irish strain H. minima JK2. However, the Korean strain had five pores around the pore plate, whereas the Irish strain had six pores. When properly aligned, the sequences of the large subunit and internal transcribed spacer regions of the ribosomal DNA of the Korean strain were identical to those of the Irish strain. This species was detected in the waters of 26 out of 28 stations, but its abundance was greater than $1.0cells\;mL^{-1}$ at 8 stations. The highest abundance of H. minima was $44.4cells\;mL^{-1}$. Although this species was found in all seasons, its abundance was greater than $1.0cells\;mL^{-1}$ when the water temperature and salinity were $10.9-25.0^{\circ}C$ and 17.5-34.1, respectively. To the best knowledge, the present study reported for the first time that H. minima lives in the Pacific Ocean and is widely distributed in the Korean waters.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.13-21
• /
• 2023

In this study, the coastal airborne chlorides were investigated in the Incheon Port, South Korea. Monthly measurements of coastal airborne chlorides were taken for a total of 2 years from September 2021 to August 2023 at 15 locations in North, South, and New Port. We analyzed the distribution characteristics of airborne chloride based on port facilities and measurement environments, as well as the reduction characteristics of the airborne chloride with respect to coastal distance. As a result, the monthly distribution range of the airborne chloride in the North, South, and New Port varied similarly, ranging from 0.4 to 3.3 mdd. Due to the influence of seasonal winds considering the direction of the coastline, both the North Port and South Port had higher the airborne chloride in winter, while the New Port had higher content in summer. The airborne chlorides were higher at locations inside an inland sea compared to those outside an inland sea. This is because the wind coming from the sea passed through the inland sea. Even in the same region with identical coastal distances, there were variations in airborne chloride levels depending on the height above the ground. In tidal zone, the monthly airborne chlorides were significantly higher in the lower part than in the upper part. The rate of decrease equation of airborne chlorides for each port based on the distance from the coastline was derived, and the results showed that as the distance from the coastline increased, the rate of decrease in airborne chlorides was the highest for New Port and the lowest for South Port.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.81-89
• /
• 2004

Introduction : The setup error due to the patient and the staff from radiation treatment as the reason which is important the treatment record could be decided is a possibility of effect. The SET-UP ERROR of the patient analyzes the effect of dose distribution and DVH from radiation treatment of the patient. Material & Methode : This test uses human phantom and when C-T scan doing, It rotated the Left direction of the human phantom and it made SET-UP ERROR , Standard plan and 3mm, 5mm, 7mm, 10mm, 15mm, 20mm with to distinguish, it made the C-T scan error. With the result, The SET-UP ERROR got each C-T image Using RTP equipment It used the plan which is used generally from clinical - Box plan, 3Dimension plan( identical angle 5beam plan) Also, ( CTV+1cm margin, CTV+0.5cm margin, CTV+0.3,cm margin = PTV) it distinguished the standard plan and each set-up error plan and The plan used a dose distribution and the DVH and it analyzed Result : The Box4 the plan and 3Dimension plan which it bites it got similar an dose distribution and DVH in 3mm, 5mm From rotation error and Rectilinear movement( $0\%{\sim}2\%$ ). Rotation error and rectilinear error 7mm, 10mm, 15mm, 20mm appeared effect it will go mad to a enough change in treatment ( $2\%{\sim}^11\%$ ) Conclusion : The diminishes the effect of the SET-UP ERROR must reduce move with tension of the patient Also, we are important accessory development and the supply that it reducing of reproducibility and the move

• Journal of Life Science
• /
• v.25 no.12
• /
• pp.1354-1361
• /
• 2015

This study was aimed to investigate the distribution status and phylogenetic relationship of Myotis aurascens in Jeju Ialnd, which has not clearly confirmed until now. We found three groups of M. aurascens from three different cave enforcements (CEs). The bat population of Jeju Island had smaller levels of HBL and Hfcu, but greater levels of TL, EL, FAL, and Tra than those of the Korean Peninsula population. Jeju bats had wide range in the lengths of FAL and Hfcu comparing to those of European bats. From the bimonthly monitoring to each finding site, we have actually failed to observe those again, estimating that they use those CEs as the daily-roosting place in activating seasons. The sequences of CYTB and COI genes showed identical sequences among Jeju bats tested, indicating that they are maternally related. The results from molecular phylogeny showed that the sequences of these bats located on the same branch with those for M. aurascens in the phylogenetic trees. Besides, the nucleotide sequences of the Jeju bats showed the closest relation with that of Korean Peninsula. Consequently, these findings indicate that the bats of M. aurascens, verified the natural distribution in Jeju Island, have originated from a single maternal origin and differences in morphological and genetic backgrounds form those of Korean Peninsula and the other countries, and had probably immigrated via Korean Peninsula. These findings will contribute as basic information for understanding the migration history and biogeographic relationship of mammals on Jeju Island in East Asia.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.165-173
• /
• 2013

This study was the estimation of the dose distribution for proton, prompt gamma rays and proton induced neutron particles, in case of exposing the proton beam to polymer gel dosimeter and water phantom. The polymer gel dosimeter was compositeness material of Gelatin, Methacrylic acid, Hydroquinone, Tetrakis and Distilled water. The density of gel dosimeter was $1.04g/cm^3$ which was similar to water. The 72, 116 and 140 MeV proton beams were used in the simulation. Proton beam interacted with the nuclei of the phantom and the nuclei in excited states emitted prompt gamma rays and proton induced neutron particles during the process of de-excitation. The proton particles, prompt gamma rays, proton induced neutron particles were detected by polymer gel dosimeter and water phantom, respectively. The gap of the axis for gel was 2 mm. The Bragg-peak for proton particles in gel dosimeter was similar to water phantom. The dose distribution for proton and prompt gamma rays in gel dosimeter and water phantom was approximately identical in case of 72, 116 and 140 MeV for proton beam. However, in case of proton induced neutron particles for 72, 116 and 140 MeV proton beam, particles were not detected in gel dosimeter, while the Water phantom absorbed neutron particles. Considering the resulting data, gel dosimeter which was developed in the normoxic state attentively detected the dose distribution for proton beam exposure except proton induced neutron particles.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.105-115
• /
• 2021

The geological CO2 sequestration in underground geological formation such as deep saline aquifers and depleted hydrocarbon reservoirs is one of the most promising options for reducing the atmospheric CO2 emissions. The process in geological CO2 sequestration involves injection of supercritical CO2 (scCO2) into porous media saturated with pore water and initiates CO2 flooding with immiscible displacement. The CO2 migration and distribution, and, consequently, the displacement efficiency is governed by the interaction of fluids. Especially, the viscous force and capillary force are controlled by geological formation conditions and injection conditions. This study aimed to estimate the effects of surfactant on interfacial tension between the immiscible fluids, scCO2 and porewater, under high pressure and high temperature conditions by using a pair of proxy fluids under standard conditions through pendant drop method. It also aimed to observe migration and distribution patterns of the immiscible fluids and estimate the effects of surfactant concentrations on the displacement efficiency of scCO2. Micromodel experiments were conducted by applying n-hexane and deionized water as proxy fluids for scCO2 and porewater. In order to quantitatively analyze the immiscible displacement phenomena by n-hexane injection in pore network, the images of migration and distribution pattern of the two fluids are acquired through a imaging system. The experimental results revealed that the addition of surfactants sharply reduces the interfacial tension between hexane and deionized water at low concentrations and approaches a constant value as the concentration increases. Also it was found that, by directly affecting the flow path of the flooding fluid at the pore scale in the porous medium, the surfactant showed the identical effect on the displacement efficiency of n-hexane at equilibrium state. The experimental observation results could provide important fundamental information on immiscible displacement of fluids in porous media and suggest the potential to improve the displacement efficiency of scCO2 by using surfactants.