• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1094-1104
• /
• 2010

In the previous studies, the validation of numerical codes has been conducted based on the qualitative comparison of predicted ice shapes with experiments, which poses a significant limit on the systematic analysis of ice shapes due to the variation of meteorological conditions. In response to this, the numerical code has been quantitatively validated against available experiment for the ice accretion on cylinders and airfoils in the present study. Ice shapes accumulated on the bodies are systematically investigated with respect to various icing parameters. To this end, maximum thickness, heading direction and ice thickness are quantified and expressed in the polar coordinate system for the comparison with other numerical results. By applying the quantitative analysis, similar shapes are intuitively distinguished. The developed numerical code underestimates the ice accretion area and the ice thickness of lower surface. In order to improve the accuracy, further accurate aerodynamic solver is required for the water droplet trajectories.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.478-483
• /
• 2012

The speed performances of ice sea trial on the Arctic(2010 & 2011) area were shown different results depend on the ice floe size. Penetration phenomena of level ice was not happened on medium ice floe and tore up by the impact force because the mass of medium ice floe is similar to the mass of Araon which is Korean ice breaking research vessel and did not shut up by the ice ridge or iceberg. The sea trial on the Amundsen sea was performed at the big floe which is classified by WMO(World Meteorological Organization). Three measurements of ice properties and five results of speed trial were obtained with different ice thicknesses and engine powers. To evaluate speed of level ice trial and model test results at the same ice thickness and engine power, the correction method of HSVA(Hamburg Ship Model Basin) was used. The thickness, snow effect, flexural strength and friction coefficient were corrected to compare the speed of sea trial. The analyzed speed at 1.03m thickness of big floe was 5.85 knots at 10MW power and it's 6.10 knots at 1.0m ice thickness and the same power. It's bigger than the results of level ice because big floe was also slightly tore up by the impact force of vessel based on the observation of recorded video.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.3
• /
• pp.186-197
• /
• 2015

In summer 2010, field measurements of local ice loads were carried out in the Arctic Ocean using the Korean first icebreaking research vessel, ARAON. In some previous studies by the authors, several investigations for the data measured at 2010 including the relationship between the measuring points and ice loads, the possibility for observation of higher ice load and the relationship between the ship speed and ice loads were reported. During 10 days in August 2013, new field measurements were performed in similar waters of the Arctic Ocean using the same vessel, ARAON. The aim of this study is to investigate the statistical properties of 2013 measurements and compare results by two periods.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.6
• /
• pp.455-461
• /
• 2001

Domestic ice making companies make effort to obtain products and neglect to introduce low cost product improvements with energy savings. The work presented here is an implementation of ice making method to improve both energy efficiency and productivity. In this present investigation, several ice making cycles are proposed for higher efficiency in the system. COP(Coefficient of Performance), ice making time and electric energy consumption are evaluated and compared with the conventional system. Results shows that COP is improved with more efficient use of time for ice making and electric consumption. Therefore, this can offer an opportunity for more efficient use of energy and higher productivity in ice making.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.147-155
• /
• 2006

Ice resistance estimation equations based on model tests and full-scale sea trial data from many previous research articles are studied. Measured ice resistance data and its empirical/semi-empirical estimation equations are summarized in common format and are compared with each other, considering three ship categories, i.e, icebreakers, tug/supply vessels, ice-strengthened cargo vessels. The most suitable estimation methods or prediction equations are recommended based on this ice resistance data analysis.

• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.106-112
• /
• 2018

Ice-binding proteins have an affinity for ice. They create a gap between the melting and freezing points by inhibiting the growth of ice, known as thermal hysteresis (TH). Interestingly, moderately active LeIBP and hyperactive FfIBP are almost identical in primary and tertiary structures, but differ in TH activity. The TH of FfIBP is tenfold higher than that of LeIBP, due to a subtle difference in their ice-binding motifs. To further evaluate the difference in TH, the interactions were investigated by ice-etching and molecular docking. Ice-etching showed that FfIBP binds to the primary and secondary prism, pyramidal, and basal planes; previously, LeIBP was found to bind to the basal and primary prism planes. Docking analysis using shape complementarity (Sc) showed that the hyperactive FfIBP had higher Sc values for all four ice planes than LeIBP, which is comparable with TH. Docking can be used to describe the hyperactivity of IBPs.

• Korean Journal of Remote Sensing
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2021

This study measures the change of ice flow velocity of David Glacier, one of the fast-moving glaciers in East Antarctica that drains through Drygalski Ice Tongue. In order to effectively observe the rapid flow velocity, we applied the offset tracking technique to Sentinel-1A SAR images obtained from 2016 to 2020 with 36-day temporal baseline. The resulting velocity maps were averaged and the two relatively fast points (A1 and A2) were selected for further time-series analysis. The flow velocity increased during the Antarctic summer (around December to March) over the four years' observation period probably due to the ice surface melting and reduced friction on the ice bottom. Bedmap2 showed that the fast flow velocities at A1 and A2 are associated with a sharp decrease in the ice surface and bottom elevation so that ice volumetric cross-section narrows down and the crevasses are being created on the ice surface. The local maxima in standard deviation of ice velocity, S1 and S2, showed random temporal fluctuation due to the rotational ice swirls causing error in offset tracking method. It is suggested that more robust offset tracking method is necessary to incorporate rotational motion.

• Ocean and Polar Research
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2004

Ice cliff retreat and sea-ice formation around King Sejong Station in King George Island were analysed and compared with air temperature change. Analysis of 33-year (1969-2001) air temperature records at Bellingshausen Station has revealed regional atmospheric warming, and the increasing rate of air temperature Is equivalent to a warming of $1^{\circ}C$ for 27-year period. Here we present time-series of observations for the areal extent of the ice cliff and ice sheet, showing that they have retreated dramatically in the past 45 years (1956-2001). Retreat of 1,050 m in length of the ice clifr has changed the Marian Cove into a low rectangular form of 4 km in length and 1 to 1.3km in width. The retreat rates have since increased from 6 m/yr of the Primary investigated Period to 54 and 81m/yr in the recent years. Exceptionally, the ice cliff had been advanced of 21m in length for a year between 1987 and 1988 of cold winters. Ice sheet in King George Island also shows a similar decrease, and the decreasing extent is much larger at the southern part of the Main Cove, relatively more exposed to the sun, than at the northern part. Comparing sea-ice formation in winter with air temperature data shows a pattern starting to freeze below $-5^{\circ}C$ and to thaw over $-3^{\circ}C$. It is conclusively estimated that the patterns and magnitudes of ice cliff retreat and sea-ice formation are consistent with fluctuations of the air temperature, and that the recent rapid retreat of ice cliff and less formation of sea-ice are caused especially by the warming trends in autumn accompanied with expansion of summer thawing period.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.535-542
• /
• 2011

We extracted a surface displacement map of Canisteo Peninsula and the surrounding area in West Antarctica by applying 4-pass DInSAR technique to two ERS-1/2 tandem pairs and analyzed the surface displacement of glaciers and sea ice. In the displacement map, glaciers showed fast motion pushing the adjoining land-fast sea ice which has the displacement in the same direction as the glacier. Cosgrove ice shelf showed large displacement pushing the adjoining land-fast sea ice as well. Some sea ice indicated the displacement that is opposite to the land-fast sea ice. This was because the type of the sea ice is drift ice that is affected by ocean current. Therefore, we could confirmed the boundary between land-fast sea ice and drift ice. It was difficult to distinguish ice shelf from ice sheet because they showed similarities both in brightness of the SAR images and in fringe rates of the interferograms. However, a boundary between fast-moving ice shelf and stable ice sheet was easily confirmed in the displacement map after the phase unwrapping process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.1
• /
• pp.116-131
• /
• 2013

The resistance performance of an icebreaking cargo vessel in pack ice conditions was investigated numerically and experimentally using a recently developed finite element (FE) model and model tests. A comparison between numerical analysis and experimental results with synthetic ice in a standard towing tank was carried out. The comparison extended to results with refrigerated ice to examine the feasibility of using synthetic ice. Two experiments using two different ice materials gave a reasonable agreement. Ship-ice interaction loads are numerically calculated based on the fluid structure interaction (FSI) method using the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the Pusan National University towing tank, and with refrigerated ice at the National Research Council's (NRC) ice tank, are used to validate and benchmark the numerical simulations. The designed ice-going cargo vessel is used as a target ship for three concentrations (90%, 80%, and 60%) of pack ice conditions. Ice was modeled as a rigid body but the ice density was the same as that in the experiments. The numerical challenge is to evaluate hydrodynamic loads on the ship's hull; this is difficult because LS-DYNA is an explicit FE solver and the FSI value is calculated using a penalty method. Comparisons between numerical and experimental results are shown, and our main conclusions are given.