• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.7-13
• /
• 2015

Recently, there are serviced user customized advertisement of various type using smart device. Representative services are advertisement service using light of smart TV screen or audible sound of smart TV to transmit advertisement information. However, those services have to do a specific action of smart device user for advertisement information or need audible audio information of TV contents. To overcome those weakness, therefore, we propose an advertisement method using inaudible sound of speaker based on smart device. This method supports the transfer of advertising content to the smart device user with no additional action or TV audio signal required to access that content. The proposed method used two high frequencies among 18kHz ~ 22kHz of audible frequency range which smart TV can send out. And it generates those frequencies synthesized with audio of TV contents as trigger signal which can send advertisements to smart device. Next, smart device analysis the trigger signal and request advertisement contents related to the signal to server. After then, smart device can show the downloaded contents to user. Because the proposed method uses the high frequencies of sound signals via the inner speaker of the smart device, its main advantage is that it does not affect the audio signal of TV content. To evaluate the efficacy of the proposed method, we developed an application to implement it and subsequently carried out an advertisement transmission experiment. The success rate of the transmission experiment was approximately 97%. Based on this result, we believe the proposed method will be a useful technique in introducing a customized user advertising service.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.247-251
• /
• 2001

Universal motors are mainly used for vacuum cleaner application. There are a lot of researches on SRM that applys home appliance throughout the world. The manufacturing cost of SRM drive makes it hard to expand its application to home appliance. This paper presents Single Phase SRM for the vacuum cleaner that has advantge in cost and performance over conventional universal motor. This paper proposes new power device driving scheme by using SRM switching characteristic. The driving scheme is very simple and inexpensive. Dwell Time Control method is used for the minimum switching loss of power device. The switching frequency of power device is less than 4.5kHz at 45,000rpm. By use of this scheme, power device based on very small switching losses can be used on SRM drive. Also, the biggest problem in single phase SRM is starting, this paper shows a new starting algorithm with two hall sensors, accelerating and running sensors, respectively. Finally, the proposed Single Phase SRM achieves higher efficiency and long life time compared to universal motor. Its life time is more than 1500 hours. Its life time is extended 4 times than that of conventional motor and its suction power is increased $20\%$ at the same volume of conventional universal motor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.31-36
• /
• 1986

As a part of study on automatic control system for green houses, an automatic irrigation system was developed by using microcomputer. For the study, gypsum block was used as a sensing device of soil moisture and its data was designed to transfer to microcomputer through A/D converter. Also, software which be able to control the irrigation time and flow rate by the solenoid valve was developed. This system was tested by using practical data and the following results were summarized. 1. Since the gypsum was very accurate in addition with chiep and easy to manufacture, it turned out to be a very good device to detect the soil moisture in this system. 2. Also, solenoid valve was very excellent device for controlling the water flow rate since its control error is less then 1% when the irrigation time is over 100 seconds.

• Journal of the Korean housing association
• /
• v.3 no.1
• /
• pp.35-46
• /
• 1992

The purpose of this study is to find out the architectural device for two places to be perceived as having distinct characteristics from each other. A residence of Yi Dynasty is selected as the object appropriate for this purpose and analyzed accordingly. The result of the analysis can be presented on two demensionis one is that of the concrete form and the other is that of the abstract meaning generated by the form. It is meaningless to employ the form of the architecture of the past in today's architecture. The language of the architecture of the past must be reinterpreted into that of tody. This means understanding and expressing the meaning of the architecture of the past, using the form and materials available today. Without limiting its scope to figuring out "the architectural device for giving destinction" on the formal demension. this study tries to clarify the meaning generated by the form, on which its significance can be said to lie.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.477-479
• /
• 2015

PUF technology is to prevent a copy of information from digital device and it can be seen whether cloning through its difference for process of implementation corresponding to wire and gate delay, etc. In this paper, multiple dielectric slabs on digital device is investigated to implement physical crypto device based on coating PUF type and its reflection characteristics is analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.272-275
• /
• 1992

Recently, the digital circuit technique has had great success and gained importance in all industries. For the measurement of degree of freshness of plant and animal's tissue, many devices has been developed. But it's data was inaccurate and it had difficulty in making database because it was depend on analog circuit technique. The purpose of this paper is the development of a device based on digital circuit for measurement of freshness degree of wet fish such that its accuracy is very trustworthy and it can be measured in a short time. The device is developed by using micro-computer with some interface modules of A-D/D-A converter and digital circuit with IC modules and its effectiveness has been evaluated through two experimental results of electrical Q-value test and chemical K-value test.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.494-499
• /
• 2001

This research carried out the experimental manufacture of the improved fastening device and its performance test as well as the structural improvement of the prototype of a new type of fastening device developed through G7 Project during the first year of the second phase. Firstly, a supplementary design for each part of the prototype was carried out in order to improve its performance and a structural analysis in order to review the stress on the fastening spring. Secondly, another prototype was manufactured and then a performance test was carried out with the criteria used for the same kind of test on the authorized ones, both at home and abroad. Finally, the usability of the device was reviewed by comparing above-mentioned test result with that of those already under commercial use.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.699-702
• /
• 2000

In order to use a parallel device fur machine tool feed mechanism, it is very important to analyze its stiffness over the workspace. Generally, the stiffness of a rod varies with its length. In this paper, the stiffness of the leg is modeled as a linear function. With the linear stiffness model, the methods that can determine stiffness bounds and max/min stiffness directions are presented utilizing eigenvalues and eigenvectors of the stiffness matrix. The stiffness variation along a tool-path and stiffness mapping over a workspace are presented with cubic-shaped parallel device which is originally designed for machine tool feed mechanism.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.53-53
• /
• 2010

Graphene comes into the spotlight as an emergent device material on account of its high carrier mobility reflecting its massless Dirac fermion behavior. Chemical technique to control reversibly the carrier concentration of semiconducting graphene for the achievement of a large-area graphene device has been strongly required. Here we show that the adsorptions of a metal and a molecule can manipulate the carrier concentration of single-layer graphene, epitaxially grown on SiC, which was directly observed using angle-resolve photoemission spectroscopy. These results will shed light on the researches for the very large scale integration of a graphene device. Furthermore, the carrier concentration changes can be applied to a highly sensitive gas sensor or a detector for an specific binding between an antigen and an antibody.