• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.73-85
• /
• 2014

Approaching to aging society with increasing transportation vulnerable, most developed countries has positively promote low-floor bus. Such circumstance in Korea has plan to introduce low-floor bus to intra-city bus system which accounted for 30 percent of total number of buses however there is no specific operating plan for this matter. According to the revealed preference study on bus service, the study shows that the efficiency of low-floor is relatively low than that of other buses, therefore, it is necessary to establish feasible plan for bus route selection. Thus, this study is to conduct research on analyzing trip characteristics of transportation vulnerable and establish bus route selection measures for low-floor bus. The result from the survey in Jeollabuk-do Province reveals that the trip purpose of transportation vulnerable is mainly for welfare and medical service, which was made less than 6 times a week. Futhermore, 37.6 percent of transportation vulnerable use buses, thus, it is essential to improve its service quality for enhancing user's convenience and safety. In that transportation vulnerable O-D needs to be established and forecasts future demand for selecting optimal bus route. According to the estimation, route passing through densely populated areas with transportation vulnerable should take the first priority, city circular and other route would be next. Moreover, it is economically efficient that areas populated more than 200,000 with fixed route and less than 200,000 with limited route responsive to demands would be feasible plans. This study will have greater an impact on transportation planning and further research on transportation vulnerable.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.202-217
• /
• 2021

Following the fatal accident of pedestrians caused by Autonomous Vehicle by Uber, the world's largest ride-hailing company, two people were killed in a self-driving car accident by Tesla in April. There is a need to ensure the safety of road users. Accordingly, in order to secure the safety of Autonomous Vehicle driving, it is necessary to evaluate Autonomous Vehicle driving technologies in various situations based on the road and traffic environment in which the Autonomous vehicle will actually drive. Therefore, this study used UC-win/Road ver.14.0 based on general driver's license test questions to present a virtual reality-based Autonomous Vehicles driving ability evaluation tool among various driving ability test method. Based on this, it was intended to test driving ability for unexpected situations in complex and diverse driving environments, and to confirm its practical applicability as an optimal tool for Autonomous vehicle ability test and evaluation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.4
• /
• pp.44-57
• /
• 2019

Various studies have been conducted to solve traffic congestions in many metropolitan cities through accurate traffic flow prediction. Most studies are based on the assumption that past traffic patterns repeat in the future. Models based on such an assumption fall short in case irregular traffic patterns abruptly occur. Instead, the approaches such as predicting traffic pattern through big data analytics and artificial intelligence have emerged. Specifically, deep learning algorithms such as RNN have been prevalent for tackling the problems of predicting temporal traffic flow as a time series. However, these algorithms do not perform well in terms of long-term prediction. In this paper, we take into account various external factors that may affect the traffic flows. We model the correlation between the multi-dimensional context information with temporal traffic speed pattern using deep neural networks. Our model trained with the traffic data from TOPIS system by Seoul, Korea can predict traffic speed on a specific date with the accuracy reaching nearly 90%. We expect that the accuracy can be improved further by taking into account additional factors such as accidents and constructions for the prediction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.570-574
• /
• 2008

The 'gate non-stop system utilizing RFID (900MHz)', which is the core of this research, is the system which connects RFID to recognize the vehicle information without stopping when a vehicle (trailer) passes a gate to carry in or out containers in a terminal and automatically provides the container information provided by the terminal for the RFLDU device installed in the vehicle.In order to design and implement this, the RFID technical section uses a UHF band (900MHz) RFID tag and a reader and implements a RFID middleware and an application program for smooth data collection and execution (operation). In addition, the system stability was verified through experiments and operations of the system implemented in this research at real harbors/quays, and based on the verified result, the maximization of vehicle (trailer) and terminal productivity and the reduction of distribution cost are expected.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1857-1863
• /
• 2012

The VDS(Vehicle Detection System) collects and transfers information about traffic situations in real time, therefore it makes the traffic management effective. Recently, the VDSs have provided good stability and accuracy in regard to system reliability and functions but they also have showed problems such as raising costs and consuming times when a new system is installed and/or the environmental requirements for the system are set up. The reason of the problems is that up to now the collection of the data and information about the traffic situations has been achieved by the 1:1 information exchange between the traffic control surveillance center and the each traffic field, between equipments and centers, and among data processing equipments and also centers. The communication systems used in the VDS are generally composed of 1 : 1 connection of the lines because the communication protocols are different in the most of the cases mentioned above. Consequently, this makes the number of communication lines become larger and causes the cost for the whole traffic information systems to increase. In this paper, a development of a controller to unify the communication protocols for the VDS is peformed to solve the problems which were mentioned above. Specially, the controller developed in this paper was applied to a radar vehicle detector and tested to show its usefulness. In addition to that, the developed controller was also designed to include functions to transfer the information about weather conditions on the roads.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.213-219
• /
• 2018

In this paper, we propose a design method and process for hardware and software of hybrid V2X communication module that supports both C-ITS communication protocol designed for vehicle environment and Legacy LTE communication technology. C-ITS is suitable for safety service applications due to its low latency characteristics, and Legacy LTE is a technology suitable for non-safety applications such as traffic information and infotainment due to high latency and high capacity. The hybrid V2X communication module supports multiple communication technologies of WAVE and LTE, in which WAVE supports multiple channels, so that it is designed to transmit road information such as LDM and positioning correction information to an autonomous vehicle in real time. The main design results presented in this paper will be applied to the implementation of future hybrid V2X communication terminals for vehicles.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.597-606
• /
• 2007

With the advent of ubiquitous age, the high quality dielectric materials have been required for the wireless communications available to the millimeterwave as well as microwave frequencies. The utilizable region for the frequency has been expanding to the millimeter-wave region because of the shortage of radio frequency (RF) resources. These high frequencies would be expected for ultra high speed LAN, ETS and car anti-collision system on the intelligent transport system (ITS) and so on. Silicates are good candidates for microwave/millimeterwave dielectrics, because of their low dielectric constant ${\epsilon}_r$ and high quality factor (High Q). Forsterite ($Mg_2SiO_4$) is one of the silicates with low ${\epsilon}_r$ of 6.8 and Q f of 240000 GHz. In this paper, we reviewed following three categories for synthesis of forsterite: (1) Synthesis of high Q forsterite (2) Adjust the temperature coefficient of resonant frequency $TC_f$ (3) Diffusion of $SiO_{4^-}$ and Mg-ions on the formation of forsterite.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.319-321
• /
• 2005

최근 효율적인 교통 흐름 제어 및 교통정보 서비스 제공을 위한 ITS(Intelligent Transport System)에 대표적인 서비스로는 수집된 정보를 바탕으로 도로의 소통정보를 모니터링하고 이용자들에게 웹이나 지역에 설치된 VMS를 통해 정보를 제공하는 것이라 할 수 있다. 그러나 이러한 서비스를 위한 GIS가 OpenGIS와 같은 표준화 단체에서 제안하고 있는 구조를 따르지 않고 있으며, 지리정보의 표현도 검증 없이 자체적으로 GIS정보를 이용함으로 인해 서비스의 성능과 품질 저하는 물론 정보통합의 어려움을 가지고 있다. 본 논문에서는 OpenGIS에서 공간정보 표현에 권고되고 있는 GML을 기반으로 도로망에 구축되어진 각종 교통정보 기기로부터 ITS로 수집된 실시간 교통정보를 이용하여 데이터베이스를 구축하고, 이를 반영하여 모바일 기기 또는 웹서비스를 통해 교통상황을 모니터링 할 수 있는 시스템을 제안하고자 한다. 제안된 시스템은 GML을 기반으로 한 지리정보 DB와 각종 교통정보 기기로부터 수집된 실시간 교통정보의 통합을 통해 모바일 기기나 웹을 통해 공통적으로 서비스를 제공할 수 있는 Client/server 시스템에 주안점을 두고 설계하였다. 본 연구에서 설계된 시스템은 전용 공간데이터를 구축하지 않고, 표준화된 공간정보인 GML을 이용한 변환 메커니즘을 통하여 서비스를 제공함으로써 비용과 시간을 절약할 수 있으며, 이 기종의 시스템에 서비스가 가능하도록 하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.943-946
• /
• 2018

본 논문은 공공데이터 API를 활용한 ITS(Intelligent Transport System)를 구현하여, 버스 승하차 관련 문제를 개선하는 버스 승하차 사전 알림 시스템에 관한 것이다. 수도권 및 대도시 전체 버스 관련 민원신고 중 가장 많이 차지하는 부분이 버스의 정류장 무정차 통과 및 승차거부 문제다. 이를 해결하기 위해 사전에 승객의 승하차 여부를 버스 운전사에게 미리 알리는 시스템을 제안한다. 이 시스템은 승객용 애플리케이션, 중앙 서버 그리고 버스에 설치되는 디바이스로 구성되어 있으며 예비 승하차 승객이 애플리케이션을 이용하여 자신이 원하는 버스에 대한 정보를 MQTT Broker를 이용하여 서버에 보내고 서버는 해당 버스의 정보와 현재 노선의 운행 현황을 주기적으로 확인하여 요청 정류장 이전에 도달하였을 때 버스 운전자 측 디바이스에 신호를 보내어 버스 운전자가 예비 승하차 승객이 있음을 사전에 알 수 있게 한다. 이 시스템을 통해 무정차 및 승차거부 문제를 근본적으로 해결하여 사용자 편의 승객 안전 일반 차량 운전자 안전 도로 교통 안정화를 도모한다.