• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.992-1006
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. Cutting-slope adjacent to outlet of spillways had been originally designed to be 63 degrees and about 65m in height. Examination is carried out in preceding construction that it is caused to some problems possibility which of machine for slope cutting couldn't approach to the site, blasting for cutting slope might have negative influence on highway and roads nearby, and fine view along the Tae-hwa river would be eliminated. In order to establish stability of tunnel and more friendly natural environment that we are carry out detailed geological surface survey and analysis of slope stability. So, we are design and construct for tunnel excavation with possible method that it is keep up natural slope. The result of survey and analysis that natural slope was divided 3 zone(A, B, C zone). In A and B zone, in first removed floating rock, high tensile tension net is install that it prevent of release and falling of rock, in order to security during under working. In addition to, pre-stressed rock anchor is install purpose of security during tunnel excavation because of fault zone near vertical developed above excavation level. Zone C is relatively good condition of ground, design is only carry out random rock bolt. All zone are designed and constructed drainage hole for groundwater and surface water is easily drain. Desinged slpoe is harmony with near natural environment. Successfully, construction is completed.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.2
• /
• pp.57-66
• /
• 2018

When developing projects to build facilities to be shared by both military bases and surrounding communities, strategies are needed to achieve two objectives: 1) minimize missteps and opposition from local communities in the process of developing and implementing such projects, and 2) promote cost-benefit optimization and user-satisfaction. With aim of promoting co-operation and co-existence between military bases and adjust communities, this research proposes esthetical factors to be considered in conceiving civil-military sharing facilities. It seeks experts' opinions on the development of civil-military sharing facilities, and examines critical factors (economic feasibility, security, and satisfaction, etc.) for project development as well as building types suitable for shared-use between military bases and local residents. It then establishes a method to prioritize facility-type and narrow down design factors (considerations and restrictions) in project development by applying quantitative analysis. The methodological approach of the research employs the Delphi survey method to quantitatively analyze qualitative information drawn from experts' opinions. At the first round of the survey, facility types, items for consideration and restrictions are drawn, and then at the second round of the survey, criticality of each item is analyzed. Finally, it reaches a conclusion on suitability of facility types for civil-military sharing facilities, and selects project considerations and restrictions when developing this kind of project.

• Child Health Nursing Research
• /
• v.10 no.1
• /
• pp.108-116
• /
• 2004

Purpose: There has been a number of reports on elution of bisphenol-A, an endocrine disrupting chemical, from milk bottles, all concerning the potential health effect of the substance. In this study, we measured the elution of bisphenol-A from milk bottles during boiling-water sterilization, to suggest a safe sterilization method. Method: Through the survey of 200 mothers, 78.5％ of them expressed their concern on the possible harmful effect of bisphenol-A, which might be eluted from the bottles. And it was found that most mothers use boiling-water to sterilize bottles; duration of boiling bottles could be divided into three groups of 3, 5, and 10 minutes. We measured the elution of bisphenol- A from three different brands of bottles, subject to various mode of sterilization found in the survey. Result: In all the measurements, the concentration of the eluted bisphenol-A was in the range of 0.3 - 0.7 ppb, far below 2.5ppm, the level set up by Korea Food ％amp; Drug Administration(KFDA) for a potential harmful effect. Conclusion: Although trace amount of bisphenol -A can be eluted from polycarbonate milk bottles during sterilization, and bottle feeding, the amount is found to be too small to cause any health related impact for infants.

• Geophysics and Geophysical Exploration
• /
• v.18 no.1
• /
• pp.14-20
• /
• 2015

Three-dimensional (3D) resistivity method is an effective tool in the engineering site survey because it can provide a 3D resistivity distribution of the site. In this study, we tried to find out faults, fractures and coal seams that can cause the collapse of the tunnel. We carried out 2D resistivity survey along 5 parallel lines and 11 cross lines and merged all the apparent resistivity data for 3D inversion. Finally, from the 3D resistivity image and drilling data we presented the 3D distribution of faults, fractures and coal seams that are considered the main cause of the tunnel collapse.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.9
• /
• pp.771-778
• /
• 2004

Recently, various applications of robot system become more popular in accordance with rapid development of computer hardware/software, artificial intelligence, and automatic control technology. Formerly robots mainly have been used in industrial field, however, nowadays it is said that the robot will do an important role in the home service application. To make the robot more useful, we require further researches on implementation of natural communication method between the human and the robot system, and autonomous behavior generation. The gesture recognition technique is one of the most convenient methods for natural human-robot interaction, so it is to be solved for implementation of intelligent robot system. In this paper, we describe the state-of-the-art of advanced gesture recognition technologies for intelligent robots according to three methods; sensor based method, feature based method, appearance based method, and 3D model based method. And we also discuss some problems and real applications in the research field.

• Journal of Engineering Education Research
• /
• v.13 no.2
• /
• pp.22-27
• /
• 2010

From a lot of survey, it is obvious that most students in universities lose their desire for learning just after entering their universities. In order to solve this problem, we developed a novel educational tool for the students, named "The thinking method based on matrix diagram". If they try hard with the help of this tool, they will be able to learn how to design and manage their splendid university lives in addition to get the basic knowledge and to improve their basic abilities. It is also found that they can earn the shared knowledge mutually after learning a common method, which supports to make them to improve their communication abilities drastically.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.39-46
• /
• 2014

Network RTK positioning, one of GNSS positioning systems, is currently very popular due to its easy operation and low cost. However, the network RTK positioning unquestioningly accepts observation result acquired with an ambiguity fixed-solution regardless of different field conditions and situations, and then it is applied to the practice. This paper, therefore, has investigated the effects of field conditions obtained network RTK survey data for the area with obstacles on the variation of positioning accuracy. Being explained in detail, after conducting survey by GPS-only positioning and combined GPS/GLONASS observations giving changes to the distance from obstacles and elevation angles, and then accuracy results of each positioning method were compared each other. As a result, while GPS-only point positioning method showed more stable results than combined GPS/GLONASS method in the areas with no obstacles, combined method gave better result than GPS-only for the areas with presence of obstacles. Based on the results of this experiment, when the further study is conducted with a variety of different field conditions affecting the survey accuracy, it can be expected that the accuracy of network RTK survey method would become to more popular.

• Survey Research
• /
• v.12 no.1
• /
• pp.1-30
• /
• 2011

The purposes of the present study were to analyze correlation of vote behavior and attitude and vote intention in the pre-survey, and to investigate the efficient method of predicting the voting result from the pre-surveys. The previous attitude is measured by the support for the candidate, political self-confidence, self-efficacy and opinion on present issues. The vote intention is surveyed by the past election participation and degree of election interest. Real voting behavior is surveyed by the post enumeration, and the pre-survey and both post-survey are conducted to the same person to analyze the correlation of voting behavior and pre-survey. The real election participation is highly correlated with vote intention, election interest and past election participation. Almost respondents did not change the supporting candidate from the poll survey to the election vote. It is shown that the voting behavior at election of the nonrespondent of pre-survey can be predicted with the demographic charater and attitude of present issues.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.18-26
• /
• 2017

Defense industries which require high reliability need an optimized quality management system with well-planned implementation. And the government should examine the overall status of defense industries, then establish practical policies with a proper support plan in required areas to upgrade the quality management level of manufacturers. Thus, DTaQ developed the model for 2 years from 2014, which specialized in quality management level analysis for defense industries. And a survey has been undertaken with that model by DTaQ and Korea Research Center in 2016. The surveyed companies randomly sampled among those which have more than 30 employees and delivery history over past 3 years, and finally 106 defense industries were selected. This paper present survey method and indexes for survey of defense industry quality management level. The survey was conducted in the order of planning, data collection and data processing, and the validity and reliability of the data were verified to increase objectivity of survey results. The survey contents mainly consist of system quality and management quality. System quality includes Product Development Management, Production Operation Management, supply chain quality management, Safety & Environment Management and Reliability Management, on the other hand, management quality includes Strategic Leadership, Human Resource Management, Customer Market Management and Information & Knowledge Management. Thus this proposes the current overall quality management status of the 106 defense industries and shows level differences by company sizes and manufacturing sectors based on the result of survey. Specifically, this paper enables to track the areas which need prompt government support with the policy directions to make quality management level higher. Therefore, it is expected that this can be used as reference data in establishing quality policies for military supplies in the future.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.4
• /
• pp.157-165
• /
• 2015

The purpose of this study is on identifying charactreistics and management direction of complementary pond of Dalmaji village in Gangjin. Accordingly, this village was indicated as Experience and Resort village by Korean government. This study describes the construction background and characteristics and identifies species diversity and characteristics through field survey. For this, literature and field survey was performed. In field survey, vegetational survey was performed in Aug. of 2015. D(Dominant degree) and S(Sociability degree) was measured by Brown-Blanquet's method. The answer was searched from Myungsanron(明山論), a textbook of Fengsui(風水) in Joseon dynasty. Of these causes, it was considered that the representative one is a protection of fire and infectious disease because the Wolgak mountain is a fire mountain(火山) as a stone mountain in Fengsui. The results demonstrate decline of aquatic ecosystem because of neglect management. The total number of species was 24. Of the species, Zelkova serrata is a natural vegetation of this complementary forest. This is nominated as Lagerstroemia indica and Camellia japonica community. Species composition demonstrate the characteristics of Korean southern region as mixed forest of evergreen trees and deciduous ones which are indigenous plants. It was considered Juniperus chinensis KaizukaVariega in central round island was planted in Japanese colonial period and it have to be removed. It was considered that name of moon pond and moon island etc. projects the mind of village ancestors which are going to reach an ideal condition of moon. And management of quantity and depth of pond water was critical for restoration of disappearing lotus from related literature. Periodic management was needed for ecological structure and function improvement because of ecological disturbance by the invasive plants like Humulus japonicus.