• The Journal of Korean Society for School & Community Health Education
• /
• v.1 no.1
• /
• pp.11-43
• /
• 2000

The purpose of this study was, through analyzing the previous researches, to grasp the present status of environment of school building(ESB), research the sundry records of each element and, through comparative analysis of the standard of ESB in Korea, the United States, and Japan, select the normative standard of ESB, to clarify the point at issue presented in Regulation of Construction & facility Management for Elementary and and Secondary School in Korea, and to suggest an alternative preliminary standard of ESB. To carry out a research for this purpose, these were required: 1. to investigate the existing present status of ESB, 2. to make a comparative analysis of the standard of ESB in each country, 3. to suggest the normative standard of preliminary standard of ESB, 4. to analyze the controversial points of the standard of ESB in Korea, 5. to suggest an alternative preliminary standard of ESB. The conclusions were as follows: 1. Putting, through analyzing the previous researches, the existing present status of ESB together, it seemed that lighting environment, indoor air environment and noise environment were all in poor conditions. 2. In the result of a comparative analysis of the standard of ESB in Korea, Japan and the United States, in Korea the factors of each lighting and indoor air environment were not presented properly, in Japan, in lighting environment aspect, the standard on natural lighting and the factors on brightness were not presented., and in the USA the essential factors of each environment were throughly presented. In the comparison of the standards on each factor, Korea showed that the standard level presented was less properly prescribed than those of the USA and Japan but it also showed that the standard levels prescribed in the USA and in Japan were mostly similar to the standard levels in records investigated. 3. With the result of the normative standard selection on School Builiding environment factor of prescribed in this study, the controversial points of the standard of ESB in Korea were analyzed and the result was utilized to suggest new preliminary standard of ESB. 4. As the result of the analysis of the controversial points of the standard of ESB in Korea, it was found that the standard of ESB in Korea should be established on a basis of School Health Act and be concretely presented in School Health Regulation and School Health Rule. The factors of each environment was improperly presented in the existing standard of ESB in Korea. Moreover the standard of them was inferior to that of the records investigated and those of in the USA and in Japan and it also showed that the standard of it in Korea was improper to maintain Comfortable Learning Environment. 5. A suggested preliminary standard of ESB acquired through above study as follows: 1) In this study a new kind of preliminary standard of ESB is divided into lighting environment, indoor air environment, noise environment, odor environment and for above classification, reasonable factor and standard should be established and the controling way on each standard and countermeasures against it should be considered. 2) In lighting environment, the factors of natural lighting are divided into daylight rate, brightness, glare. In the standard on each factor, daylight rate should secure 5% of a mean daylight rate and 2% of a minimum daylight rate, brightness ratio of maximum illumination to minimum illumination should be under 10:1, and in glare there should not be an occurrence factor from a reflector outside of the classroom. And the factors of unnatural lighting are illumination, brightness, and glare. In the standard on each factor, illumination should be 750 lux or more, brightness ratio should be under 3 to 1, and glare should not occur. And Optimal reflection rate(%) of Colors and Facilities of Classroom which influences lighting environment should be considered. 3) In indoor air environment factors, thermal factors are divided into (1) room temperature, (2) relative humidity, (3) room air movement, (4) radiation heat, and harmful gases (5) CO, (6) $CO_2$ that are proceeded from using the heating fuel such as oval briquettes, firewood, charcoal being used in most of the classroom, and finally (7) dust. In the standard on each factor, the next are necessary; room temperature: $16^{\circ}C{\sim}26^{\circ}C$(summer : $E.T18.9{\sim}23.8^{\circ}C$, winter: $E.T16.7{\sim}21.7^{\circ}C$), relative humidity: $30{\sim}80%$, room air movement: under 0.5m/sec, radiation heat: under $5^{\circ}C$ gap between dry-bulb temperature and wet-bulb temperature, below 1000 ppm of ca and below 10ppm of $CO_2$, dust: below 0.10 $mg/m^3$ of Volume of dust in indoor air, and ventilation standard($CO_2$) for purification of indoor air : once/6 min.(about 7 times/40 min.) in an airtight classroom. 4) In the standard on noise environment, noise level should be under 40 dB(A) and the noise measuring way and the countermeasures against it should be considered. 5) In the standard on odor environment, odor level under Physical Method should be under 2 degrees, and the inspecting way and the countermeasures against it should be considered.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.306-316
• /
• 2015

In today's highly competitive business environment, most companies try to manage their logistics function strategically to satisfy their orders as cost-effectively as possible and maximize their present and future profits. In this environment, logistics process visibility is essential to companies wishing to competently track components, parts, or products in transit from the original suppliers to the final destinations. Thus, it is important to provide instantly and easily recognizable information about such visibility to all stakeholders, especially customers. To ensure a high-level geographical visibility of the logistics processes, in this paper, we propose a way of implementing a GIS-based logistics process monitoring environment and of integrating a performer's work processing environment on the monitoring system. Additionally, to provide more abundant monitoring information, we describe a procedure for creating and processing various monitoring information, which are represented as ECA rules in this work processing environment. Therefore, it is possible to provide intuitive and visible monitoring information regarding the logistics process and resource elements.

• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.651-658
• /
• 2008

Estuary barrier is a hydraulic structure constructed to supply safely water as protecting chlorine penetration of sea water. However, the barrier brings about a problem which decreases original functions of estuary because hydraulic ecology was disrupted as obstructing natural water exchange between fresh water and sea water. It is important to supply Enough fresh water in the estuary ecosystem. But it is possible to reduce the problems brought from barrier throughout efficient water gate operation of estuary barrier. It was shown in this study that the environmental effect of estuary in Nakdong river was investigated according to the control of water level. Also, the basic information about the effective water gate operation was provided. The analysis results showed that the release rate of estuary was increased about 20% as changing the operational water levels. This helps supplying fresh water durably to the mixing zone. Also, CE-QUAL-W2 model was utilized to assess water quality. The values of BOD and COD were not changed in estuary area. From the result, it was analyzed the effect of water quality according to the water gate operation was not indicated.

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.83-97
• /
• 2018

This study analyses the use of agri-environment concept in South Korean laws and tries to identify the limitations and improvements. The agri-environment has been used in the EU agricultural policy since the mid 1980s, and now became the most important policy in the rural development policy. It has been regarded as a concept explaining the various factors for agricultural production. However, the EU defines it as results of agricultural production which includes not only environmental and natural features but also social and historical resources in rural areas. This definition has played a key role in the 2013 reform of the CAP. Because many developed countries are implementing the agri-environmental policy, South Korea needs to introduce it soon. In doing so, this research explores how the current South Korean laws are dealing with the relationship between agriculture and environment. It reviews 34 laws in total and finds out neither act applying the concept of agri-environment, nor recognizing the role of agricultural production in biological and environmental conservation. Nevertheless, this research identifies that some acts could be a basis for introducing agri-environmental policy in South Korea if they may complement the interrelationship between the agricultural production and conservation of rural resources.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1391-1396
• /
• 2011

A way to increase productivity in agriculture that is labor-centered industry is to graft IT technology. Today, many technologies in ubiquitous computing are deployed in all areas of society such as traffic control, automotive manufacturing, construction, defence, healthcare and clinical services. These IT technologies is gaining more attention as a fusion technology among traditional industries. To successfully build ubiquitous agriculture environment, it needs optimized core technology development for agriculture that includes sensor node H/W, middleware platform, routing protocol and agriculture environment application services. To achieve accurate botany growth environment management, we propose a green growth environment management system using environmental factor monitoring sensor and biological information sensors in greenhouse. By using our proposed system, it is expected to realize fusion complex agriculture technology with low cost.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.1-18
• /
• 2022

A conceptual site model is used to support decision-making of response strategy development, determination, and implementation within a risk-based contaminated site management system. It aims to provide base information of the relevant site characteristics and surface/subsurface conditions in order to understand the contaminants of concern and the associated risk they pose to the receptors. This study delineated the technical details of conceptual site model development, and discussed the possibility of applying it in domestic subsurface contamination management. Conceptual site models can be developed in various formats such as tables, diagrams, flowcharts, and figures. Contaminated sites are managed for a long period of time following the steps of investigation, remediation design, remediation, verification, and post-remedation management. The conceptual site model can be enhanced in each stage of the contaminated site management based on the continuously updated information on the site's subsurface environment. In the process of enhancement for conceptual site model, precision is gradually improved, and it can evolve from a conceptual and qualitative form to a more quantitatvive and three-dimensional model. In soil pollution management, it is desirable to incorporate the conceptual site model into the soil scrutiny system to better assess the current status of the contaminated site and support follow-up investigation and management.

• Hwankyungkyoyuk
• /
• v.20 no.4
• /
• pp.39-50
• /
• 2007

The purpose of this paper is to development of the environment writing workbook to enhance environmental literacy of elementary school student. To achieve the purpose, the concrete paper processes are as follows. First, in order to development of the environment writing workbook to enhance environmental literacy, Writing of Environment Club students did various writing activities as an experiment. The environment writing workbook is developed using the students product feedback. Second, the environment writing workbook was used for the 5th graders in the elementary school for 10 weeks to see how the environment writing workbook would enhance the students' environmental literacy. The results of this paper are as follows. It's application was meaningful in the level of p<.05 in point of view of environmental literacy as a result of the pre-post test in the experiment group, who is one of the 5th grade classes in the elementary school. In conclusion, the environment writing workbook is very effective to enhance the seven parts of environmental literacy out of eleven. It is necessary because the environment writing helps to think of environmental issue deeply, learn about regional environmental problems, establish sound environment sense of value, give the opportunities to participate in activities.

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.27-32
• /
• 2012

In recent years, the quality of the outdoor thermal environment has come to be regarded as important as that of the indoor thermal environment. Since the outdoor thermal environment is composed of many elements and is affected by many factors, it is not easy to evaluate the impact of each factor separately. Hence, a comprehensive assessment method is required. In order to evaluate the pedestrian level comfort of an outdoor climate, it is necessary to investigate not only wind velocity but also various physical elements, such as temperature, moisture, radiation, etc. Prediction of wind and thermal environment for a large scale buildings is one of the most important targets for research. Wind and thermal change in a city area is a very complicated phenomenon affected by many physical processes. The purpose of this study is to develop a design plan for wind environment at a large Buildings. In this study, we analyze outdoor wind environment and thermal environment on buildings using the CFD (Computational Fluid Dynamics) method. The arrangement of building models is an apartment in Jeonju. These prediction of wind and thermal environment for a large scale buildings is necessary in a plan before a building is built.

• Korean Journal of Organic Agriculture
• /
• v.28 no.4
• /
• pp.555-577
• /
• 2020

This study analyzes the management performance and productivity of environmentfriendly farms compared to conventional farms and the trend of changes in price premium rates of environment-friendly agricultural products. And environmentfriendly farms in Jeollanam-do are surveyed for difficulties in management, proper premium rate of environment-friendly agricultural products (WTA), and tasks for promoting sales. According to the analysis results, the management performance and productivity of are low in many items, and the number of items that are on the decline or stagnant in the environment-friendly premium is making it difficult for farmers to manage. According to a farm survey, the most important task is to promote school meals for boosting sales of environment-friendly agricultural products. And 65.5% of the respondents having contract cultivation, nearly half or 41.1% of the respondents said they do not need contract cultivation or want contract cultivation for less than one year, which means that the current contract does not meet the needs of farmers. Finally, the environment-friendly premium rate based on consumer prices is generally lower than the premium rate (WTA) that farmers perceive as appropriate, so it is important to resolve the gap between the actual premium rate and the WTA.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.32-43
• /
• 2014

To identify major causes of the global environment changes arising from extreme and unusual weather patterns occurring these days, and to foresee future environmental changes, it is highly important to shed light on the correlation between climate changes and global environment system. To investigate the correlation between climate changes and global environment system, it calls for establishing an integrated climate-environment DB for analyzing comparatively the data on climatic changes and global environment system. In the preceding studies, we researched an XML-based integrated climate-environment DB and developed a management system for the DB. However, the existing integrated climate-environment DB, designed and installed only for individual PCs, does not allow multiple users 'simultaneous access. Accordingly, it fails to systematically update and sharing data which is being generated continuingly. Hence, this study aims to develop an easy-to-use GIS-based integrated DB management system by improving the existing integrated climate-environment DB through the adoption of the client/server model. For this, this study collected and analyzed climate and environment data prior to designing and building a DBMS-based integrated DB. In addition, in order for multidisciplinary researchers to easily get access and apply the integrated DB, this study designed and developed a GIS-based integrated DB management system using a client/server model which facilitates connections with multiple PCs. The GIS-based integrated climate-environment DB management system makes it easier to efficiently manage and locate scattered climate-environment data. It is also expected that the DB system will bring the effects in saving time and cost by avoiding the overlapping generation of data in the areas of integrated climate-environment research.