• Physical Therapy Korea
• /
• v.9 no.1
• /
• pp.81-96
• /
• 2002

The purpose of this research was to determine the effects on the healing of fibular fractures in rabbits of low-intensity pulsed ultrasound (50 $mW/cm^2$ and 500 $mW/cm^2$) applied for periods of 4, 14 and 24 days following fibular osteotomy. Thirty-six male Japanese white rabbits were randomly divided into three groups of twelve for three treatment protocols: (1) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 4th day following fibular osteotomy, (2) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 14th day following fibular osteotomy, and (3) ultrasound treatment at intensities of 50 $mW/cm^2$ and 500 $mW/cm^2$ until the 24th day following fibular osteotomy. The low-intensity pulsed ultrasound was applied to only one fibula of each rabbit (these served as the experimental group). The other fibula of each rabbit served as the control group. The selection of which fibula was to be treated was made randomly. The animals were sacrificed on the 4th, 14th and 24th day after the start of ultrasound treatments. Percent of trabecular bone area and fibular radiography were carried out to compare the degree of fibular bone healing. A microscope was also used to determine any histologic changes. For statistical differences in radiological changes due to length of treatment period (4, 14 and 24 days respectively), the Wilcoxon signed-ranks test was used to compare the experimental and control groups. For statistical differences in fracture healing due to differences in ultrasound intensity, radiological studies were compared using the Mann-Whitney Test. And, to compute percentage differences in areas of trabecular bone, Two-way analysis of variance (ultrasound intensity x each group) was used. Experiment results were as follows: 1. In animals sacrificed on the 4th day, no difference was found in the radiological studies of the fibulae in the experimental and control groups (p>.05). However, experimental groups showed more rapid bone repair than control group. 2. Both radiographic and percent of trabecular bone area studies showed significant differences in rabbits sacrificed after 14 days. Fracture healing was significantly increased in the experimental group (p<.05) 3. In the animals sacrificed on the 24th day, histologic study showed rapid bone repair but fibular radiologic studies did not show statistical differences between the two groups (p>.05). 4. On the 14th day, bone union on radiograph was significantly more rapid in the treatment group with pulsed ultrasound of 50 $mW/cm^2$ than the group with 500 $mW/cm^2$ (p<.05). Histologic studies showed that both the 14 and 24 days groups had more rapid bone repair in animals treated with 50 $mW/cm^2$ ultrasound intensity than those treated with 500 $mW/cm^2$ intensity. In conclusion, it has been shown that the low-intensity pulsed ultrasound has a positive effect on bone fracture healing in the early stage and the range of pulse ultrasound from 50 $mW/cm^2$ to 500 $mW/cm^2$ is effective for fracture healing. Further study is needed to investigate the influence of pulsed ultrasound on delayed union and non-union in bone fractures and also for the clinical use of low-intensity pulsed ultrasound for bone healing in humans.

• Journal of agricultural medicine and community health
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2006

Objectives: We studied to find out the relevant relationship between the type of residence and the level of mental depression among aged people. Methods: The authors surveyed 156 people who are over 65 in a small city. Here are three groups: 50 persons who live in the facility for the aged. 72 persons who live with their family and 34 persons who live alone. We developed the questionnaire and the severity of depressive symptoms was measured using Korean Form of Geriatric Depression Scale (KGDS) score. Results: Positive rate of depressive disorders among the aged people was 43.6%. Positive rate of depressive disorders among the aged who live in the facility for the aged was 42.0% and that persons who live with their family was 9.7%. It's more likely to be their gender, the marital status, schooling, going out and pocket money that affect on their mental depression. According to the multiple logistic regression, the odds ratios of the persons who live in the facility for the aged versus persons who live with their family and pocket money in a month were significant (p<0.05). Conclusions: The research shows that the mental depression in the aged people is more serious in the facility for the aged and also significantly related to their pocket money.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.189-198
• /
• 2000

The stochiometric mixture of evaporating materials for the $CuGaSe_2$single crystal thin films were prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuGaSe_2$, it was found tetragonal structure whose lattice constant $a_0}$ and $c_0$ were 5.615 $\AA$ and 11.025 $\AA$, respectively. To obtains the single crystal thin films, $CuGaSe_2$mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $610^{\circ}C$ and $450^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5$\mu\textrm{m}$/h. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction (DCXD). Hall effect on this sample was measured by the method of van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30 K to 150 K and by polar optical scattering in the temperature range 150 K to 293 K. The optical energy gaps were found to be 1.68 eV for CuGaSe$_2$sing1e crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation then the constants in the Varshni equation are given by $\alpha$ = $9.615{\times}10^{-4}$eV/K, and $\beta$ = 335 K. From the photocurrent spectra by illumination of polarized light of the $CuGaSe_2$single crystal thin films. We have found that values of spin orbit coupling $\Delta$So and crystal field splitting $\Delta$Cr was 0.0900 eV and 0.2498 eV, respectively. From the PL spectra at 20 K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0626 eV and the dissipation energy of the acceptor-bound exciton and donor-bound exciton to be 0.0352 eV, 0.0932 eV, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.51-55
• /
• 2015

The present research is focused on the effect of porous graphite what is influenced on the 4H-SiC crystal growth by PVT method. We expect that it produces more C-rich and a change of temperature gradient for polytype stability of 4H-SiC crystal as adding the porous graphite in the growth cell. The SiC seeds and high purity SiC source materials were placed on opposite side in a sealed graphite crucible which was surrounded by graphite insulator. The growth temperature was around $2100{\sim}2300^{\circ}C$ and the growth pressure was 10~30 Torr of an argon pressure with 5~15 % nitrogen. 2 inch $4^{\circ}$ off-axis 4H-SiC with C-face (000-1) was used as a seed material. The porous graphite plate was inserted on SiC powder source to produce a more C-rich for polytype stability of 4H-SiC crystal and uniform radial temperature gradient. While in case of the conventional crucible, various polytypes such as 6H-, 15R-SiC were observed on SiC wafers, only 4H-SiC polytype was observed on SiC wafers prepared in porous graphite inserted crucible. The defect level such as MP and EP density of SiC crystal grown in the conventional crucible was observed to be higher than that of porous graphite inserted crucible. The better crystal quality of SiC grown using porous graphite plate was also confirmed by rocking curve measurement and Raman spectra analysis.

• Korean journal of communication and information
• /
• v.30
• /
• pp.203-237
• /
• 2005

The purpose of this study is to find a model that can measure the public relations programs based on the assumption that the public relations should aim to lift the corporate reputation. It is a trend that corporate's activities are to be measured from the standpoint of cost-benefit efficiency. However, public relations fields in Korea is left behind this trend because the fields lack in sophisticated model. In order to fill this gap, the researchers introduce the reputation measurement model that can calculate individual corporate public relations programs. In addition, this reputation model Is applied to Korean companies with the expectation of producing a PR index which ran be used to measure the reputation as corporate asset, or superbrand. This study examines the effects of superbrand on consumers according to the media use. Based on the expert group interviews and surveys on consumers, the factors of reputation are drawn. These factors contribute to find reputation model and measurement index which are again applied to measure the Korean companies' public relations programs. Using superbrand as dependent variables and managing abilities, corporate responsibility, corporate communication, and product/employee quality, this study seeks to find which factor specifically attribute to lift corporate reputation. Results show that each factor influences the corporate reputation positively. In addition, the researchers find that media use is moderately related to the superbrand building process in cognitive dimension.

• Journal of forensic and investigative science
• /
• v.2 no.1
• /
• pp.5-22
• /
• 2007

From the numerous social problems generated by the unbalanced social development and the social trend of belittling life overall, we found the causes of suicide getting worse in its seriousness day by day. In reality, the problem has been approached in a collateral level in contrast with other social problems. There have been an active involvement in studying the definition, causes and ways of prevention of suicide theoretically until now. However, different from other social problems, it is almost impossible to treat or fix the problem of suicide. Only ways to treat or fix the problem is when the suicide has ended in failure. Thus, this study intends to examine the suicide rate among the total accidents during the year 2005, perform the analyses on the actual causes according to the relations such as the means of suicide, occupation, age group, educational background, etc. In order to present a solution to the issue of suicide becoming serious each day. Among the total accidents in 2005, the suicide rate came out to be approximately 52.4%. Among the result, 52.4%, male with 69% resulted higher than female with 31%, which appears to be related to the social functions. While men tends to take more active(80%) means of suicide like jumping off, poison, hanging, etc., women tends to take more passive(60%) means of suicide like sleeping pills, slitting wrist, etc. In terms of the cause, pessimism, illness, denial, mental disorder, etc resulted more than 75%, and there were many cases of suicide after exhibiting the signs of depression. Also there were higher suicide rate of the unemployed engaged in direct labor with educational background lower than college level related to the pessimism regarding the family living cost. We were able to determine the recent increase in the suicidal tendency of the educated people higher than the college level and the retired people with depression caused by the sudden change in social status. Overall there are several reasons for suicide, however, in most cases the signs of depression were exhibited until the final suicide, which tells us the serious psychological problem of suicide. Assuming that the current development of suicide will continue in future, the result of this study will guide the corresponding social policies, be utilized in preparing the insurance or management at the national level dealing with the real social problems that are not just a conflict of an individual, but could spread like a fad and become much bigger than the present by the continuous support at the environmental, social and political levels, and be utilized as the basic data to establish the research plan.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.31-57
• /
• 1991

Korean firms of all sizes, from virtually every industry, have used and are using the term "excessive competition" to describe the state of their industry and to call for government interventions. Moreover, the Korean government has frequently responded to such calls in various ways favorable to the firms, such as controlling entry, curbing capacity investments, or allowing collusion. Despite such interventions' impact on the overall efficiency on the Korean economy as well as on the wealth distribution among diverse groups of economic agents, the term "excessive competition", the basis for the interventions, has so far escaped rigorous scrutiny. The objective of this paper is to clarify the notion of "excessive competition" and "over-investment" which usually accompanies "excessive competition", and to examine the circumstances under which they might occur. We first survey the cases where the terms are most widely used and proceed to examine those cases to determine if competition is indeed excessive, and if so, what causes "excessive competition". Our main concern deals with the case in which the firms must make investment decisions that involve large sunk costs while facing uncertain demand. In order to analyze this case, we developed a two period model of capacity precommitment and the ensuing competition. In the first period, oligopolistic firms make capacity investments that are irreversible. Demand is uncertain in period 1 and only the distribution is known. Thus, firms must make investment decisions under uncertainty. In the second period, demand is realized, and the firms compete with quantity under realized demand and capacity constraints. In the above setting, we find that there is "no over-investment," en ante, and there is "no excessive competition," ex post. As measured by the information available in period 1, expected return from investment of a firm is non-negative, overall industry capacity does not exceed the socially optimal level, and competition in the second period yields an outcome that gives each operating firm a non-negative second period profit. Thus, neither "excessive competition" nor "over-investment" is possible. This result will generally hold true if there is no externality and if the industry is not a natural monopoly. We also extend this result by examining a model in which the government is an active participant in the game with a well defined preference. Analysis of this model shows that over-investment arises if the government cannot credibly precommit itself to non-intervention when ex post idle capacity occurs, due to socio-political reasons. Firms invest in capacities that exceed socially optimal levels in this case because they correctly expect that the government will find it optimal for itself to intervene once over-investment and ensuing financial problems for the firms occur. Such planned over-investment and ensuing government intervention are the generic problems under the current system. These problems are expected to be repeated in many industries in years to come, causing a significant loss of welfare in the long run. As a remedy to this problem, we recommend a non-intervention policy by the government which creates and utilizes uncertainty. Based upon an argument which is essentially the same as that of Kreps and Wilson in the context of a chain-store game, we show that maintaining a consistent non-intervention policy will deter a planned over-investment by firms in the long run. We believe that the results obtained in this paper has a direct bearing on the public policies relating to many industries including the petrochemical industry that is currently in the center of heated debates.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.117-124
• /
• 2015

In this paper, we introduce how to control TR, TE physical MR parameters for managing $H_1$ spin's SI(Signal Intensity) which is combined with gadolinium following administration MR agent in T1 effect for diagnostic usefulness. we used MRI phantom made with 0.5 mol Gadoteridol. This phantom was scanned by FSE sequence with different TR, TE parameters. In this study, to make T1 effect, TR was 200, 250, 300, 350, 400, 450, 500, 550, 600 msec. In addition to, TE was 6.2, 12.4, 18.6, 21.6 msec. The results were as follows ; Each RSP(Reaction Starting Point) was 100, 50, 40, 30 mmol in TE 6.2, 12.4, 18.6, 21.6 msec being irrelevant to TR. In MPSI(Max Peak Signal Intensity), 4 mmol was showed in TR 200 msec while peak signal was decreased to low concentration mol in TR 250-600 msec. In terms of RA(Reaction Area), the highest SI was TE 6.2 msec in TR 200-600msec. According to the study, we are able to recognize it is possible to control enhance rates by managing TR and TE of MR parameters; moreover, we expect that enhanced T1 image in MR clinical field can be performed in a practical way with this quantitative data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.134-141
• /
• 2015

The purpose on this research is quantitatively comparing and analyzing signal intensity of 1.0mol and 0.5mol contrast agent. For this study, two MR phantoms were produced. One of them is used with 1.0mol Gadobutrol. The other is used with 0.5mol Gadoteridol. These two phantoms respectively have been scanned by SE T1 sequence which is used to get a general contrast-enhanced image in 1.5T MRI and 3D FLASH sequence which is used as enhanced angio MRI. Signal intensity was measured by scanned images as per contrast agent dilution ratio. The results were as follow: RSP(Reaction Starting Point) of the two sequences(2D SE, 3D FLASH) was respectively 6.0%, 60.0% in 0.5mol contrast and 2.0%, 20.0% in 1.0mol contrast, which means in 0.5mol contrast, RSP was formed faster than the one in 1.0mol contrast. MPSI was respectively 1358.8[a.u], 1573[a.u] in 0.5mol contrast and 1374[a.u], 1642.4[a.u] in 1.0mol contrast, which means 0.5mol contrast's MPP (0.4%, 10.0%) was formed faster than 1.0mol contrast's MPP (0.16%, 1.8%). Lastly, RA as per contrast agent dilution ratio was 27.4%, 11.8% wider in 0.5mol contrast(20747.4[a.u], 23204.6[a.u]) than in 1.0mol contrast(12691.9[a.u], 20747.4[a.u]). According to the study, we are able to assure that signal reaction time of 1.0mol contrast is slower than the one of 0.5mol contrast in contrast-enhanced MRI at two different sequences(2D SE, 3D FLASH). Furthermore, owing to the fact that there are not any signal intensity differences between 1.0mol and 0.5mol contrast, it is not true that high concentration gadolinium MR contrast agent does not always mean high signal intensity in MRI.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.493-502
• /
• 2012

Objectives: The purpose of this study is to investigate the mass concentration of nanoparticles and understand the characteristics of elements of heavy metal concentrations within nanoparticles in the air using Micro-Orifice Uniform Deposit Impactor Model-110 (MOUDI-110), based on indoor and outdoor air. Methods: This Study sampled nanoparticles using MOUDI-110 indoors (office) and outdoors at S University in Asan, Korea in order to reveal the concentration of nanoparticles in the air. Sampling continued for nine months (10 times indoors and 14 times outdoors) from March to November 2010. Mass concentrations of nanoparticle and concentrations of heavy metals (Al, Mn, Zn, Ni, Cu, Cr, Pb) were analyzed. Results: Indoors, geometric mean concentration of nanoparticles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 0.929 ${\mu}g/m^3$ and 1.002 ${\mu}g/m^3$, respectively. On the other hand, the levels were lower outdoors with 0.819 ${\mu}g/m^3$ and 0.597 ${\mu}g/m^3$. Mann-Whitney U tests showed that the difference between the indoors and the outdoors was statistically meaningful in terms of particles of 0.056 ${\mu}m$ or less (p<0.05) in size. These results are possibly influenced by the use of printers and duplicators as the factor that increased the concentration of nanoparticles. In seasonal concentration distribution, the level was higher during the summer compared to in the autumn. Those of 0.056 ${\mu}m$ or less in size presented a statistically meaningful difference during the summer (p<0.05). These results may be influenced by photochemical event as the factor that makes the levels high. Regarding zinc, among the other heavy metals, the fine particles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 1.699 $ng/m^3$ and 1.189 $ng/m^3$ in the outdoors. In the indoors, the levels were lower, with 0.745 $ng/m^3$ and 0.617 $ng/m^3$. Cr and Ni at the size of 0.056 ${\mu}m$ or less, both of which have been known to pose severe health effects, recorded higher concentrations indoors with 0.736 $ng/m^3$ and 0.177 $ng/m^3$, compared to 0.444 $ng/m^3$ and 0.091 $ng/m^3$ outdoors. By season, Zn, Ni, Cu and Pb posted a high level of indoor concentration during the fall. As for Cr, the level of concentration indoors was higher than outdoors both during the summer and the autumn. Conclusion: This study indicates the result of an examination of nano-sized particles and heavy metal concentrations. It will provide useful data for the determination of basic nanoparticle standards in the future.