• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.28 no.4
• /
• pp.203-221
• /
• 2017

This study is to suggest some improvement directions of the criteria for the management evaluation in order to contribute to the achievement of lasting value of the continuous development and publicity in regard to the public library means-efficiency. To this end, This study analyzed the means-efficiency evaluation criteria via theoretical review on business analysis of private enterprise and the analysis framework based on it. The improvement of evaluation criteria in regard to efficiency for the continuous development of public library are as follows. 1) Regardless of domestic and foreign, an efficiency index in the performance evaluation index of public library is absolutely insufficient. The sufficient indexes measuring efficiency which is appropriate for the concept of performance should be developed. 2) A flow data representing input and performance in certain time period is insufficient. Therefore, evaluation index consisted of flow data should be more developed. 3) Long term stock data is excluded in the term cost as it is the cost used for the long term such as fixed assets. However, it is useful as input data, which is realized through the perfect accounting.

• Journal of Korean Society on Water Environment
• /
• v.37 no.4
• /
• pp.286-295
• /
• 2021

The removal efficiency of road-deposited sediment (SDR) by road sweeping was analyzed by performing particle size analysis before and after road sweeping at four highways during May to December 2019. The SDR accounted for the largest proportion in the range of 250 to 850 ㎛ and the degree of its proportion had an effect on the particle size distribution curve. The particle size distribution of the collected sediments showed a similar distribution at all sites. Below 75 ㎛, the removal efficiency of SDR showed a constant value around 40%, but above 75 ㎛, it increased as the particle size increased. The removal efficiency was 82-90% (average 86%) for gravel, 66-93% (average 79%) for coarse sand, 35-92% (average 64%) for fine sand, 29-69% (average 44%) for very fine sand, 19-58% (average 40%) for silt loading, 10-59% (average 40%) for TSP, 13-57% (average 40%) for PM10, and 15-61% (average 38%) for PM2.5. SDR removal efficiency showed an average of 69% for the four highways. It was found that if the amount of SDR was less than 100 g/m², it was affected by the road surface condition and had a large regional deviation. As such, the amount of SDR and the removal efficiency increased. The fine particles, which have relatively low removal efficiency, contained a large amount of pollutants, which is an important factor in water and air pollution. Therefore, various measures to improve the removal efficiency of fine particles in SDR by road sweeping are needed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.42 no.3
• /
• pp.35-49
• /
• 2017

The main objective of this paper is to empirically analyze the efficiency effects of mergers on Korean pharmaceutical firms and suggests managerial or policy implications for managers or policy makers. This study selects non-merging control firms close to the size of merging firms, as well as a set of merging firms, and measures the effects of mergers on efficiency three years before and after the merger using the non-parametric data envelopment analysis (DEA) method. To compare the differences of efficiency means among several groups, Wilcoxon rank sum test or Wilcoxon signed rank test is used. It showed that the long-term effects after the merger appeared partially. Furthermore, it was observed that there was no difference statistically in the efficiency between merging and non-merging firms. Also, there was no difference statistically in the efficiency between the pre- and post-merger periods. In conclusion, there was not any observed synergy effect through group (or affiliated) mergers between affiliates or related mergers for Korean pharmaceutical firms.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.871-873
• /
• 2008

In this letter, we investigate the spectral efficiency of IEEE 802.22 wireless regional area network (WRAN) spectrum overlay when it is used in TV white space. Since 2004, when the FCC published the notice of proposed rule making 04-186 to make use of unused TV spectrum, the IEEE 802.22 working group has been standardizing specifications for WRAN operations. There have been a few papers investigating the spectral efficiency of this, but their analyses were limited to the cases for various guard distances between WRAN base stations. Since WRAN base station (BS) power for WRAN service may differ from country to country, it is important to analyze the spectral efficiency for various WRAN BS powers. In this letter, we analyze the spectral efficiency of WRAN spectrum overlay as a function of the power of WRAN BSs. The simulation results show that spectral efficiency decreases as the power of WRAN BSs and guard distances increase.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.713-722
• /
• 2010

This paper has assessed the flow patterns and settling efficiency in the sedimentation basin using the particle tracking method of the CFD code and has reached the following conclusions: In the original design where no baffle is installed in the sedimentation basin, a large recirculating area where the flow stagnates is created in the right side of the sedimentation basin, with most of the particles moving to the left side of the sedimentation basin following the flow. This biased flow structure in the sedimentation basin reduces the residence time of particles and thereby undermines settling efficiency. The biased flow toward the left side of the sedimentation basin is alleviated by installing a baffle in the sedimentation basin, promptly reducing the fast flow of over 0.7 m/s in the inlet of the sedimentation basin to the rate below 0.2 m/s. In this paper's simulation conditions, if a one-sided baffle is to be installed in the sedimentation basin, placing it 15 meters away from the basin's inlet leads to the best settling efficiency; it has also been analyzed that installing a two-sided baffle-rather than a one-sided one-is a better option in terms of settling efficiency. The highest settling efficiency of 96.2% is achieved when the underwater length of the two-sided baffle is set at 8 meters.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.1
• /
• pp.5-14
• /
• 2000

In the design of epicyclic gearing, the analysis of interference and mechanical efficiency is an important index. As an applied way, epicyclic gearing can be used for planetary gear drive and differential gear unit. In case that one of its components is fixed with intend, it is called planetary gear drive. On the contrary, in case that no component is fixed, it is called differential gear unit. In this paper, various design constraints and interferences are defined for 2K-H I type epicyclic gearing which is a basic arrangement of diverse epicyclic gearings. And various interferences are analyzed, and mechanical efficiency is calculated in case that 2K-H I epicyclic gearing is used for a differential gear unit as the change of gear ratio, cutter pressure angle, addendum modification coefficient. As that results, trend of mechanical efficiency is investigated in the ranges of addendum modification coefficients which would not lead to interferences, and the optimal range of addendum modification coefficient which can generate the maximum mechanical efficiency are presented. In order to prove results of theoretical efficiency analysis, experimental studies are performed.

• Geomechanics and Engineering
• /
• v.20 no.4
• /
• pp.313-322
• /
• 2020

This study focuses on a prediction approach of compaction compensation grouting efficiency in sandy soil. Based on Darcy's law, assuming that the grouting volume is equal to the volume of the compressed soil, a two-dimensional calculation model of the compaction compensation grouting efficiency was improved to three-dimensional, which established a dynamic relationship between the radius of the grout body and the grouting time. The effectiveness of this approach was verified by finite element analysis. The calculation results show that the grouting efficiency decreases with time and tends to be stable. Meanwhile, it also indicates that the decrease of grouting efficiency mainly occurs in the process of grouting and will continue to decline in a short time after the completion of grouting. The prediction three-dimensional model proposed in this paper effectively complements the dynamic relationship between grouting compaction radius and grouting time, which can more accurately evaluate the grouting efficiency. It is practically significant to ensure construction safety, control grouting process, and reduce the settlement induced by tunnel excavation.

• Journal of Distribution Science
• /
• v.15 no.11
• /
• pp.49-57
• /
• 2017

Purpose - In Korea, general super markets have a great impact on the market performance of traditional markets. We propose a modified two stage DEA model for evaluating the performance of traditional markets in Incheon, Korea by identifying the influence of external environmental factors including the presence of general super markets as non-discretionary variables in DEA. Research design, data, and methodology - After obtaining bias-corrected estimates of original DEA efficiency scores using the input and output data of 49 traditional markets, we regress them on several external environmental factors by bootstrap-truncated regression. Results - We obtain bias-corrected efficiency scores from the original DEA efficiency scores by bootstrap and among the five environmental factors, the residential population and the presence of general super markets or SSMs can be considered as the driving forces influencing bias-corrected efficiency scores, positively and negatively, respectively. Conclusions - When DEA efficiency scores tend to be overestimated, we need to use a biased-corrected efficiency score by bootstrap. It is important to note that the efficiency of traditional markets can be largely influenced by external environmental factors such as the presence of general super markets or SSMs that traditional markets can not control. Therefore, it is desirable to consider such environmental factors appropriately for a reasonable performance evaluation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3395-3409
• /
• 1974

The purpose of this study is to test and compare the efficiency of heating-system for materials and construction of the wall, ceiling and window in soil brick house, cement house and boulder house respectively, in order to construct ideal farm houses in rural area. The results obtained were as follows: 1. In heat conservation due to construction of walls the thermal efficiency of cement brick house was equivalent to 66.3% of that of soil brick house, and boulder house 60.3% 2. In the case of ceiling, the thermal efficiency of paper ceiling was amounted to 84.2% of that of the composite ceiling (thickness 6mm veneer+thickness. l0m chaffs), and the common ceiling putting on soil above the ceiling, 76% of the composite while the efficiency of the ceiling putting on chaffs above them was 15.8% higher than that of the paper. 3. In the case of improving the window, the double type was 12% higher than. the efficiency of single type. 4. The warming velocity of conventional house was slower but the velocity of radiation was quicker than that of experimental one. It was thought to be due to unscietific constructions of the room bottom, fire inlet and chimney, 5. The temperature gradient line was not dependad upon the amount of throwing into fuel in the rural farm house. 6. It was concluded that the final thermal efficiency of the conventional farm house was 10.6% lower than that of experimental farm house.

• Journal of ILASS-Korea
• /
• v.15 no.4
• /
• pp.177-181
• /
• 2010

This paper has designed a mixing enhancement apparatus called Lobed-plate and Step-plate and comparatively calculated desulfurization efficiency of when its shape was changed. The parameters used at this time were the shape, SR ratio and the number of nozzles of the mixing enhancement apparatus and comparatively analyzed desulfurization efficiency according to these parameters. As a result, the Step-plate appeared as more highly by around 4% than Lobed-plate in desulfurization efficiency according to the shape of the mixing promotion apparatus, and when the desulfurization efficiency as a SR ratio is considered, it appeared highly by an average of 5% when the SR ratio is 3 rather than 2. As a result of comparing desulfurization efficiency by fixing the SR ratio and setting the number of nozzles as 4 pieces and 6 pieces, there was no big change in desulfurization efficiency when the SR ratio is 2, but it could be confirmed to improve by around 5% when the SR ratio is 3 when time passed 8 seconds.